저가형 용사피막형성법 이용 태양열 집열판 표면 처리에 관한 연구
Research on surface coating of a solar collector using thermal spray foaming methodology for low cost
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Abstract
A solar collector surface coated with a low emission material is still imported from other developed countries expensively. Thus it is very significant to develop a new coating method with a cheap alternative coating material instead of the imported high-cost collector surface. A thermal spray method was adopted to coat a cheap Titania on a copper plate. Generally, a new coating on the copper plate was conducted successfully by selecting a proper ratio of carbon and acetylene. By measuring an absorption rate of solar and heat emission rate, all the plate types gained a high absorption rate of 98% approximately, more or less, but all of the types still have a high emission. Finally it was clear that more research is needed to advance the coated-plate to subdue the high emission from the hot plate surface and the higher the Titania’s proportion is, the lower the emission is on the surface.
참고문헌 (7)
- "Effect of substrate and bond coat on contact damage in Zirconia-based plasma-sprayed coating", 293 (1997)
- "Acoustic emission studies on thermal sprayed materials", 102 (1998)
- "금속기지 내열 경사기능 복합재료 개발에 관한 연구", 13(1) (1999)
- "Phase composition and properties of plasma-sprayed zirconia thermal barrier coatings Journal of Materials Science", 27 (1992)
- "Functional graded ZrO2-NiCrAIY coating prepared by plasma spraying using premixed,spheroidized powders", 96 (1997)
- "Failure Mechanisms of Thermal Barrier Coating Exposed to Elevated Temperature", 95, Thin Solid Films
- "Failure Mechanisms of Thermal Barrier Coating Exposed to Elevated Temperature", 95, Thin Solid Films