분산전원형 PV 인버터 성능 개선을 위한 실시간 처리기반의 PV-Power-Hardware-In-Loop 시뮬레이터 개발
evelopment of PV-Power-Hardware-In-Loop Simulator with Realtime to Improve the Performance of the Distributed PV Inverter
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As the global warming threats to humanity, renewable energy is considered the key solution to overcome the climate change. In this circumstance, distributed PV systems are being expanded significantly its market share in the renewable energy industry. The performance of inverter is the most important component at PV system and numerous researches are focusing on it. In order to improve the inverter, PV simulator is an essential device to experiment under various load and conditions. This paper proposes the PV Power–Hardware–In–Loop simulator (PHILS) with real-time processing converted electrical and mathematical models to improve computation speed. Single-diode PV model is used in MATLAB/SIMULINK for the PV PHILS to boosting computation speed and dynamic model accuracy. In addition, control algorithms for sub-components such as DC amplifier, measurement device and several interface functions are implemented in the model. The proposed PV PHILS is validated by means of experiments with commercial PV module parameters.
Abstract
As the global warming threats to humanity, renewable energy is considered the key solution to overcome the climate change. In this circumstance, distributed PV systems are being expanded significantly its market share in the renewable energy industry. The performance of inverter is the most important component at PV system and numerous researches are focusing on it. In order to improve the inverter, PV simulator is an essential device to experiment under various load and conditions. This paper proposes the PV Power–Hardware–In–Loop simulator (PHILS) with real-time processing converted electrical and mathematical models to improve computation speed. Single-diode PV model is used in MATLAB/SIMULINK for the PV PHILS to boosting computation speed and dynamic model accuracy. In addition, control algorithms for sub-components such as DC amplifier, measurement device and several interface functions are implemented in the model. The proposed PV PHILS is validated by means of experiments with commercial PV module parameters.
참고문헌 (7)
- Kesler, M., "Vehicle-to-grid Reactive Power Operation Using Plug-in Electric Vehicle Bidirectional Offboard Charger", IEEE Trans. Ind, Electron, 61, pp.6778~6784 (2014)
- Liu, H., "Vehicle-to-grid Control for Supplementary Frequency Regulation Considering Charging Demands", IEEE Trans, Power Syst, 30, pp.3110~3119 (2015)
- Ma, C., "Comparative Study of PI Controller and Fuzzy Logic Controller for Three-phase Grid-connected Inverter", Proceedings of the IEEE International Conference on Mechatronics and Automation, 7(10), pp.2067~2071 (2011)
- Zhang, L., "A High Efficiency Inverter Design for Google Little Box Challenge", IEEE Trans. Ind, Electron, 2015 IEEE 3rd Workshop (2015)
- Faranda, R., "MPPT Techniques for PV Systems: Energetic and Cost Comparison", 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, pp.1~6 (2008)
- Desoto, W., "Improvement and Validation of a Model for Photovoltaic Array Performance", Solar Energy, 80(1), pp.78~88 (2006)
- Paul, P. S., "Modeling Combined Effect of Temperature and Irradiance on Solar Cell Parameters by MATLAB", Simulink, 2012, 1~6