The Effect of HPMC Concentration on the Morphology and Post Drawing of Wet Spun Regenerated SF/HPMC Blend Filaments
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this paper, the regenerated silk fibroin (SF)/ hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.
Abstract
In this paper, the regenerated silk fibroin (SF)/ hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.
참고문헌 (17)
- Gubbins RH., "The effects of casein on diclofenac release from hydroxypropylmethylcellulose (HPMC) compacts", Int J Pharm., 260, pp.69~76 (2003)
- Ha SW., "Structural studies of Bombyx mori silk fibroin during regeneration from solutions and wet fiber spinning", Biomacromolecules, 6, pp.1722~1731 (2005)
- Ki CS., "The effect of residual silk sericin on the structure and mechanical property of regenerated silk filament", Int J Biol Macromol., 41, pp.346~353 (2007)
- Ki CS., "Development of 3-D nanofibrous fibroin scaffold with high porosity by electrospinning: implications for bone regeneration", Biotech lett., 30, pp.405~410 (2008)
- Lee KH., "Preparation and characterization of wet spun silk fibroin", poly(vinyl alcohol) blend filaments, 2007, pp.41, 168~172
- Lee KH., "Application of electrospun silk fibroin nanofibers as an immobilization support of enzyme", Fibers and Polymers, 6, pp.181~185 (2005)
- Maki KC., "Cholesterol lowering with high-viscosity hydroxypropylmethylcellulose", Am J Cardiol., 84, pp.1198~1203 (1999)
- Marsano E., "Wet spinning of Bombyx mori silk fibroin dissolved in N-methyl morpholine N-oxide and properties of regenerated fibres", Int J Biol Macromol., 37, pp.179~188 (2005)
- Marsano E., "Regenerated cellulose-silk fibroin blends fibers", Int J Biol Macromol., 43, pp.106~114 (2008)
- Meinel AJ., "Optimization strategies for electrospun silk fibroin tissue engineering scaffolds", Biomaterials., 30, pp.3058~3067 (2009)
- Minoura N., "Attachment and growth of cultured fibroblast cells on silk protein matrixes", J Biomed Mater Res., 29, pp.1215~1221 (1995)
- Sakabe H., "In vivo blood compatibility of regenerated silk fibroin", Sen-i Gakkaishi., 45, pp.487~490 (1989)
- Trojani C., "Three-dimensional culture and differentiation of human osteogenic cells in an injectable hydroxypropylmethylcellulose hydrogel", Biomaterials, 26, pp.5509~5517 (2005)
- Um IC., "Structural characteristics and properties of solution, blend film, and wet spun filament of regenerated silk fibroin prepared by formic acid", 박사, pp.2002
- Um IC., "Wet spinning of silk polymer: I. Effect of coagulation conditions on the morphological feature of filament", Int J Biol Macromol., 34, pp.89~105 (2004)
- Um IC., "Wet spinning of silk polymer: II. Effect of drawing on the structural characteristics and properties of filament", Int J Biol Macromol., 34, pp.107~119 (2004)
- Yoshimizu H., "Preparation and characterization of silk fibroin powder and its application to enzyme immobilization", J Appl Polym Sci., 40, pp.127~134 (1990)