기능성 무기물과 폴리올레핀계 수지의 정량적 혼합시스템에 의한 환경대응형 포장소재 개발
Environment Corresponding Package by Quantitative Mixing System with Functional Inorganic Material and Polyolefin Resin
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700~1,400d (width;1.5~3㎜, thickness;0.01~0.5㎜). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.
Abstract
A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700~1,400d (width;1.5~3㎜, thickness;0.01~0.5㎜). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.
참고문헌 (16)
- G. Natta, , Gazz. Chim, 87, pp.570~ (1957)
- Y. S. Jeong, , Polypropylene, Polymer, 4(4), pp.337~343 (1980)
- D. W. Lim, "KR Pat. 0003672", ~ (1996)
- S. J. Choi, "KR Pat. 0005951", ~ (2002)
- M. Yani, "Ammonia Gas Removal Characteristics Using Biofilter with Activated Carbon Fiber as a Packing Material", Environ. Technol, 19, pp.709~715 (1998)
- D. J. Lee, "A Study on the Geological Occurrence, the Mineralogical and Physico - Chemical Properties of the Yucheon Sericite Ore in Chungha Area", The Mineralogical Society of Korea, 10(2), pp.114~125 (1997)
- S. U. Aja, "Illite Stability Equilibria in Solution : I. Phase Relationships in the System K2O-Al2O3- SiO2-H2O between 25 and 250 Co", Geochimica et Cosmochimica Acta, 55, pp.1353~1364 (1991)
- Q. Du, "Adsorption of Copper at Aqueous Illite Surfaces", Journal of Colloid and Interface Science, 187, pp.232~242 (1997)
- H. S. Kim, "KR Pat. 0098930", ~ (2005)
- Y. H. Lee, "Far-infrared Finish", J. Korean Soc. Dyers & Finishers, 8, pp.71~77 (1996)
- V. Hopfea, "In-situ FTIR Emission Spectroscopy in a Technological Environment: Chemical Vapour Infiltration (CVI) of SiC composites", Journal of Molecular Structure, 347(1), pp.331~342 (1995)
- 이현경, "게르마늄 화합물의 원적외선 방사특성", 공업화학, 17(6), pp.597~603 (2006), 한국공업화학회
- 박영미, "투습방수 직물의 온열 쾌적성 향상을 위한 세라믹 복합코팅", 한국섬유공학회지, 44(4), pp.211~219 (2007), 한국섬유공학회
- H. S. Shim, "Far IR Emission and Thermal Properties of Ceramic Coated Fabrics by IR Thermography", Key Engineering Materials, 321, pp.849~852 (2006)
- K. Vaideki, "Investigation on the effect of RF Air Plasma and Neem Leaf Extract Treatment on the Surface Modification and Antimicrobial Activity of Cotton Fabric", Surface Science (2007)
- H. S. Kim, "KR. Pat. 0048614", ~ (2001)