침식 해석을 이용한 월 블로워 노즐의 성능 예측
Performance Evaluation of Wall Blower Nozzle using Erosion Analysis
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Accumulation of coal ash at the boiler wall reduces combustion and fuel efficiency. The design of a wall blower is important to effectively remove coal ash. We present numerical results for the removal of coal ash from boiler walls of domestic coal-fired power plants, associated with the computational fluid dynamics for the flow from spray nozzle to boiler wall. The numerical model simulates an erosion process in which the multiphase fluid comprising saturated vapor and fluid water is sprayed from the nozzle, and the water particles impact the boiler wall. We adopt the Finnie erosion model for water particles. We obtain the erosion rate density as a function of nozzle angle and its injection angle. As excessive coal ash removal usually induces damage to the boiler wall, the removal operation typically focuses on a large area with uniform depth rather than the maximum removal of coal ash at a specific location. In order to estimate the removal performance of the wall blower nozzle considering several functionality and reliability factors, we evaluate the optimal injection and nozzle angles with respect to the biggest cumulative and highest erosion rates, as well as the widest range and lowest standard deviation of the erosion rate distribution.
Abstract
Accumulation of coal ash at the boiler wall reduces combustion and fuel efficiency. The design of a wall blower is important to effectively remove coal ash. We present numerical results for the removal of coal ash from boiler walls of domestic coal-fired power plants, associated with the computational fluid dynamics for the flow from spray nozzle to boiler wall. The numerical model simulates an erosion process in which the multiphase fluid comprising saturated vapor and fluid water is sprayed from the nozzle, and the water particles impact the boiler wall. We adopt the Finnie erosion model for water particles. We obtain the erosion rate density as a function of nozzle angle and its injection angle. As excessive coal ash removal usually induces damage to the boiler wall, the removal operation typically focuses on a large area with uniform depth rather than the maximum removal of coal ash at a specific location. In order to estimate the removal performance of the wall blower nozzle considering several functionality and reliability factors, we evaluate the optimal injection and nozzle angles with respect to the biggest cumulative and highest erosion rates, as well as the widest range and lowest standard deviation of the erosion rate distribution.
참고문헌 (14)
- Slagging and fouling in pulverized-coal-fired utility boilers: Vol.2, A survey of boiler design practices for avoiding slagging and fouling, "Barrett, R. E.", EPRI, 1891~1891 (1979)
- Isreb, M., "Integrated life synthesis for boiler sootblowers in fossil power plants", Comput. Struct, 63(6), pp.1043~1051 (1997)
- Pophali, A., "Studies on sootblower jet dynamics and ash deposit removal in industrial boilers", Fuel Process. Technol, 105, pp.69~76 (2013)
- Shi, Y., "On-line monitoring of ash fouling and soot-blowing optimization for convective heat exchanger in coal-fired power plant boiler", Appl. Therm. Eng, 78, pp.39~50 (2015)
- Jang, I., "Optimization of Nozzle Shape Parameters for Wall-blower", Proc. of KSPE 2015 Fall Conference, pp.331~ (2017)
- Zbogar, A., "Shedding of ash deposits", Prog. Energy Combust. Sci, 35(1), pp.31~56 (2009)
- 하명우, "형광체 함유 용액 고속 토출 조건에서의 듀얼 압전 디스펜서 공이와 노즐의 마모 특성 평가", 한국트라이볼로지학회지, 33(2), pp.52~53 (2017), 한국트라이볼로지학회[DOI]
- "ANSYS CFX Solver Theory Guide, Release 13", ANSYS, Inc., Southpointe, 275 Technology Drive, Canonsburg, PA 15317, ~ (2010)
- 장일광, "인입 거리에 따른 가변형 월 블로워의 성능 평가", 한국정밀공학회지, 35(5), pp.531~536 (2018), 한국정밀공학회
- Finnie, I., "Some observations on the erosion of ductile metals", Wear, 19(1), pp.81~90 (1972)
- Song, X. G., "Performance comparison and erosion prediction of jet pumps by using a numerical method", Mathematical and Computer Modelling, 57(1-2), pp.245~253 (2013)
- Grant, G., "Erosion prediction in turbomachinery resulting from environmental solid particles", J. Aircr, 12(5), pp.471~478 (1975)
- Hutchings, I.M, "Mechanical and metallurgical aspects of the erosion of metals" (1979), Proc. NACE Conference on Corrosion-Erosion of Coal Conversion System Materials “Erosion: prevention and useful applications”
- Bierens, H. J, "Topics in advanced econometrics:Estimation, testing, and specification of cross-section and time series models", pp.212~247 (1994), Cambridge University Press