고온 환경에서 합금의 마모 및 마찰 특성에 관한 연구
A Study on Wear Properties of Alloys in High Temperature Condition
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In this work we investigated the friction and wear characteristics of a magnesium alloy, which has been receiving much attention as a light metal in industrial applications such as automobiles and aerospace. Magnesium is one of the lightest structural material that has high specific strength, lightweight, low density and good formability. However, current issue of using magnesium alloy is that magnesium has weakness against temperature. As the temperature increases, magnesium undergoes poor creep resistance and ease of softening, and therefore, its mechanical strength decreases sharply. To solve this issue, a new type of magnesium alloy that retains high strength at high temperature has been proposed. The tribological behavior of this alloy was investigated using a tribotester with reciprocating motion and heating plate. A stainless steel ball was used as a counter surface. Results showed that extrusion process has similar wear behavior to the commonly used casting process but retains good mechanical strength and durability. The presence of an alloying element enhanced the wear properties especially in high temperature. This study is expected to be utilized as fundamental data for the replacement of high density materials currently used in mechanical industries to a much lighter and durable heatresistant materials.
Abstract
In this work we investigated the friction and wear characteristics of a magnesium alloy, which has been receiving much attention as a light metal in industrial applications such as automobiles and aerospace. Magnesium is one of the lightest structural material that has high specific strength, lightweight, low density and good formability. However, current issue of using magnesium alloy is that magnesium has weakness against temperature. As the temperature increases, magnesium undergoes poor creep resistance and ease of softening, and therefore, its mechanical strength decreases sharply. To solve this issue, a new type of magnesium alloy that retains high strength at high temperature has been proposed. The tribological behavior of this alloy was investigated using a tribotester with reciprocating motion and heating plate. A stainless steel ball was used as a counter surface. Results showed that extrusion process has similar wear behavior to the commonly used casting process but retains good mechanical strength and durability. The presence of an alloying element enhanced the wear properties especially in high temperature. This study is expected to be utilized as fundamental data for the replacement of high density materials currently used in mechanical industries to a much lighter and durable heatresistant materials.
참고문헌 (11)
- Guo, C., "Space tribological properties of metal matrix space lubri-cant coating prepared on titanium surface", Surface and Coatings Technology, 246, pp.40~45 (2014)
- El-Morsy, A., "Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 473(1-2), pp.330~335 (2008)
- Blau, P. J., "Sliding friction and wear of magnesium alloy AZ91D produced by two differ-ent methods", Tribol. Int., 33(8), pp.573~579 (2000)
- Liu, T., "Effect of Sc addition on the work-hardening behavior of ZK60 magnesium alloy", Mater. Des., 43, pp.572~577 (2013)
- Wang, X., "Micro-structure, tensile properties and creep behaviors of as-cast Mg-2Al-1Zn-Gd (x=1, 2, 3, and 4wt.%) alloys", J. Alloy. Compd., 522, pp.78~84 (2012)
- Nemati, N., "Mechanical and high temperature wear properties of extruded Al composite reinforced with Al13 Fe4 CMA nanoparticles", Materials & Design, 90, pp.532~544 (2016)
- Wang, W., "Microstructure, tensile, and creep behaviors of Ti-22Al-25Nb (at.%) orthorhombic alloy with equiaxed microstructure", Materials, 11(7), pp.1244~ (2018)
- 송영남, "Hot Rolling of Flame Retardant Magnesium and Aluminum Alloys to Produce a Cladding Plate", International Journal of Precision Engineering and Manufacturing, 19(4), pp.521~527 (2018), 한국정밀공학회
- Li, J., "Heat treatment and mechanical properties of a high-strength cast Mg-Gd-Zn alloy", Materials Science and Engineering: A, 651, pp.745~752 (2016)
- Raghavan, V., "Al-Gd-Mg (Aluminum-Gadolinium-Magnesium)", Journal of Phase Equilibria and Dif-fusion, 28(5), pp.464~468 (2007)
- Zhang, J., "The effect of Gd element and solution treatment on the microstructure of AZ31 magnesium alloy and its kinetic model", Journal of Alloys and Compounds, 663, pp.610~616 (2016)