섬유 방향에 따른 에폭시 기반 복합재의 마찰 및 마모 특성에 관한 연구
Effect of Fiber Orientation on the Friction and Wear Properties of Epoxy-based Composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we present an experimental investigation of the friction coefficient and wear area change of carbon/epoxy and E-glass/epoxy composites depending on the fiber direction (0°/90°). We compared the results of the case where the sliding direction is parallel to the fiber direction (0°) with that of the case where it is perpendicular to the fiber direction (90°). The ball-on-plate wear test equipment was used to cause wear in both directions. Two types of specimens were prepared with thicknesses of 3 mm—one made of carbon fiber reinforced plastic composite (CFRP) and the other of glass fiber reinforced plastic composite (GFRP). A normal force of 20 N was applied to the specimen and the sliding speed was 10 mm/s and the sliding distance was set to 20 m to perform the wear test. The CFRP demonstrates superior tribological characteristics compared to the GFRP. This outcome is attributed to graphitization of carbon, which serves as solid lubricating particles. In addition, both CFRP and GFRP are worn more in the 90° direction than in the 0° direction. This is due to the greater occurrence of fiber breakage and separation in the 90° direction than in the 0° direction. This study is expected to be utilized as basic data for understanding the friction and wear characteristics of CFRP and GFRP composites along the fiber direction and to apply the appropriate material.
Abstract
In this paper, we present an experimental investigation of the friction coefficient and wear area change of carbon/epoxy and E-glass/epoxy composites depending on the fiber direction (0°/90°). We compared the results of the case where the sliding direction is parallel to the fiber direction (0°) with that of the case where it is perpendicular to the fiber direction (90°). The ball-on-plate wear test equipment was used to cause wear in both directions. Two types of specimens were prepared with thicknesses of 3 mm—one made of carbon fiber reinforced plastic composite (CFRP) and the other of glass fiber reinforced plastic composite (GFRP). A normal force of 20 N was applied to the specimen and the sliding speed was 10 mm/s and the sliding distance was set to 20 m to perform the wear test. The CFRP demonstrates superior tribological characteristics compared to the GFRP. This outcome is attributed to graphitization of carbon, which serves as solid lubricating particles. In addition, both CFRP and GFRP are worn more in the 90° direction than in the 0° direction. This is due to the greater occurrence of fiber breakage and separation in the 90° direction than in the 0° direction. This study is expected to be utilized as basic data for understanding the friction and wear characteristics of CFRP and GFRP composites along the fiber direction and to apply the appropriate material.
참고문헌 (12)
- Friedrich, K., "Friction and Wear of Polymer Composites", pp.233~ (1986), Elsevier
- 구병춘, "탄소섬유가 혼합된 세라믹 복합재 제동마찰재의 마찰·마모 특성", 한국트라이볼로지학회지, 33(1), pp.15~22 (2017), 한국트라이볼로지학회[DOI]
- Ragab K. Abdel-Magied, "The effect of fiber orientation on wear behavior of glass fiber-epoxy filled with particles", Industrial Lubrication and Tribology, 70(8), pp.1552~1559 (2018), Emerald[DOI]
- Sahin, Y., "Tribological behaviour of unidirectional carbon fibre-reinforced epoxy composites", IOP Conf. Series, Materials Science and Engineering, 174 (2016)
- Sarkar, Pujan, "Effectof Normal Load and Velocity on Continuous Sliding Friction and Wear Behavior of Woven Glass Fiber Reinforced Epoxy Composite", ICMPC, Materials today: Proceedings, 4 (2016)
- B. Suresha, "Friction and WearCharacteristics of Carbon-epoxy and Glass-epoxy Woven Roving Fiber Composites", Journal of Reinforced Plastics and Composites, 25(7), pp.771~782 (2006), SAGE Publications[DOI]
- Woo, S. T., "Friction and Wear Behavior of Carbon", Carbon Composites for Aircraft Brake Material, 1993, pp.9(1), 62~69
- Sung Nak-Ho, "Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites", Wear, 53(1), pp.129~141 (1979), Elsevier BV[DOI]
- J.P. Giltrow, "The role of the counterface in the friction and wear of carbon fibre reinforced thermosetting resins", Wear, 16(5), pp.359~374 (1970), Elsevier BV[DOI]
- M. Sharma, "Influence of orientation of long fibers in carbon fiber–polyetherimide composites on mechanical and tribological properties", Wear, 267(5-8), pp.839~845 (2009), Elsevier BV[DOI]
- Isaac, M. Daniel, "Engineering Mechanics of Composite Materials", pp.37~ (2006), Oxford University Press
- Seyyed Mohammad Hasheminia, "Failure mechanism of bonded joints with similar and dissimilar material", Composites Part B: Engineering, 161, pp.702~709 (2019), Elsevier BV[DOI]