CPV모듈의 2차 광학계 특성에 따른 성능분석
Performance Analysis of CPV Modules for Optimizing Secondary Optical Elements
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.
Abstract
Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.
참고문헌 (12)
- 정병호, "SOG렌즈를 적용한 집광형 태양전지모듈 특성", 전기학회 논문지 P권, 61(2), pp.97~102 (2012), 대한전기학회[DOI]
- 이강연, "반사판 적용 구형렌즈를 갖는 집광형 태양전지모듈", 조명.전기설비학회논문지, 25(11), pp.83~90 (2011), 한국조명.전기설비학회
- 이강연, "Using the Loss parameter calculation method for the CPV system simulation", 한국융합학회논문지, 8(8), pp.17~26 (2017), 한국융합학회[DOI]
- Jeong, W. L., "Optimization of the Secondary Optical Element of a Hybrid Concentrator Photovoltaic Module Considering the Effective Absorption Wavelength Range", Appl. Sci, 10, pp.2051~ (2020)
- Fontani, D., "Optical Tests on a Curve Fresnel Lens as Secondary Optics for Solar Troughs", Int. J. Photoenergy, 2017, pp.1~11 (2017)
- Nardello, M., "Developing Instrumentation for Analysis of CPV TwinFocus® System", Journal of Physics: Conf, pp.1~6 (2019)
- Bett1, A. W., "High-Concentration PV using III-V Solar Cells", Presented at 7. the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, pp.7~12 (2006)
- Chen, Y. C., "Design of the Secondary Optical Elements for Concentrated 8. Photovoltaic Units with Fresnel Lenses", Appl. Sci, 5, pp.770~786 (2015)
- Salmi, T., "MATLAB", Simulink Based Modeling of Solar 9. Photovoltaic Cell, 2012, pp.2(2), 214~218
- Siaw, F. L., "A Systematic Method of Interconnection Optimization for Dense-Array Concentrator Photovoltaic System", The Scientific World Journal, 2013, pp.1~11 (2013)
- Park, S. M., "Experimental Study on Performance Evaluation of the Reflector Designed for CPV Solar System", Korea Solar Energy Society, 36(2) (2016)
- Kang, S. W., "PV Receiver Raytracing Simulation with Secondary Optics in the CPV(Concentrated PV)System", Korea Solar Energy Society, 30(2), pp.323~331 (2010)