슈퍼섬유 Chopped fiber와 고무와의 Compound에 따른 기계적 물성연구
Study on the Mechanical Properties of Compounding Chopped Fiber and Rubber
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The uniformly dispersed p-Aramid chopped fiber in a variety of rubber was investigated. The cross section and surface propreties in a variety of rubber were characterized by scanning electron microscopy(SEM), weight, tensile strengh, cold resistance measurements. The 1mm p-Aramid chopped fiber better uniformly dispersed than the other p-Aramid chopped fiber. The p-Aramid of lmm chopped fiber showed excellent adhesion in rubber composite becasuse of homogeneous dispersion. Consequently, the best 1mm chopped fiber and rubber improved the strength of the composite.
Abstract
The uniformly dispersed p-Aramid chopped fiber in a variety of rubber was investigated. The cross section and surface propreties in a variety of rubber were characterized by scanning electron microscopy(SEM), weight, tensile strengh, cold resistance measurements. The 1mm p-Aramid chopped fiber better uniformly dispersed than the other p-Aramid chopped fiber. The p-Aramid of lmm chopped fiber showed excellent adhesion in rubber composite becasuse of homogeneous dispersion. Consequently, the best 1mm chopped fiber and rubber improved the strength of the composite.
참고문헌 (11)
- B. K. Kwang, "Para-aramid Super Fiber for the High-tech Industry", KISTI Tech News Breif, 1~13 (2003)
- Super Fiber Technology Trends for the High-tech Industry, "B. K. Kwang", KISTI, 1~48 (2003)
- E. M. Abdel-bary, "Effect of Gamma Radiation-rgafted Aaramid Chopped Fibers as the Reinforcing Filler in Styrene-butadiene Rubber Mixtures", Polymers for Advvanced Technologies, 8, pp.140~ (1997)
- A. M. Salvi, "Characterization of the Interface in Rubber", silica Composite Materials, 2002, pp.33, 850~
- J. S. Lee, "Effect of Rubber Compounding Additives on Adhesion of Aramid to Rubber", Master, Department of Advanced Materials Engineering, pp.1996
- 이태상, "아라미드 섬유의 플라즈마 처리에 따른 클로로프렌 고무와의 계면접착 특성", 한국섬유공학회지, 47(3), pp.205~211 (2010), 한국섬유공학회
- K. Y. Choi, "Effects ofCarbon Black Morphology and Loading Level on the Physical Properties of Natural Rubber Compound", Elastomer, 33(1), pp.17~ (1998)
- P. J. Lange, "The Effect of Oily Finish Components on the Adhesion between Aramid Fibers and Rubber", J. of Adhesion Science and Technology, 23, pp.139~ (2009)
- N. V. David, "Creep of a Twaron", Natural Rubber Composite, 2013, pp.20, 464~
- 정경호, "폴리에스터 코드의 표면개질 조건이 SBR", 폴리에스터의 접착에 미치는 영향, 2007, pp.42(2), 75~85[DOI]
- M. R. Kashani, "Aramid-Short-Fiber Reinforced Rubber as a Tire Tread Composite", J. of Applied Polymer Science, 133, pp.1355~ (2009)