고분자 래핑(wrapping)에 의한 전처리가 ABS/MWNT 나노복합체의 물성에 미치는 영향
Effect of Polymer Wrapping on the Properties of ABS/MWNT Nanocomposites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Abstract― ABS/MWNT nanocomposites were prepared by using MWNT wrapped with SAN through melt compounding. Effect of wrapping of MWNT by SAN on the morphology, mechanical and electrical properties of ABS/MWNT were analyzed. It was found that SAN could wrap MWNT effectively indicated by the increased thickness after wrapping, which is presumably due to helical structure of polyacrylonitrile component in a block copolymer of SAN. MWNT was observed to be dispersed more evenly in ABS matrix by SAN wrapping, which resulted in improved tensile properties of the composites. On the other hand, there was little effect on the impact strength and electrical properties of ABS having inherently high impact strength.
Abstract
Abstract― ABS/MWNT nanocomposites were prepared by using MWNT wrapped with SAN through melt compounding. Effect of wrapping of MWNT by SAN on the morphology, mechanical and electrical properties of ABS/MWNT were analyzed. It was found that SAN could wrap MWNT effectively indicated by the increased thickness after wrapping, which is presumably due to helical structure of polyacrylonitrile component in a block copolymer of SAN. MWNT was observed to be dispersed more evenly in ABS matrix by SAN wrapping, which resulted in improved tensile properties of the composites. On the other hand, there was little effect on the impact strength and electrical properties of ABS having inherently high impact strength.
참고문헌 (17)
- J. Liu, "Environmentally Benign Preparation of Metal Nano-particles by Using Water-in-CO2 Micro Emulsions Technology", Curr. Opin. Solid State Mater. Sci., 7, pp.255~261 (2003)
- M. Kiguchia, "Mechanical Fabrication of Metal Nano-contacts showing Conductance Quantization under Electrochemical Potential control", Physica E, 29, pp.530~533 (2005)
- A. N. Samant, "Laser machining of structural ceramics", J. Eur. Ceram. Soc., 29, pp.969~993 (2009)
- G. A. Gogotsi, "Fracture Toughness of Ceramics and Ceramic Composites", Ceram. Int., 29, pp.777~784 (2003)
- S. Iijima, "Helical Microtubules of Graphitic Carbon", Nature, 354, pp.56~58 (1991)
- A. C. Dillon, "A Simple and Complete Purification of Single- Walled Carbon Nanotube Materials", J. Adv. Mater, 11, pp.1354~1358 (1999)
- E. Dujardin, "Purification of Single-Shell Nanotubes", Adv. Mater, 10, pp.611~613 (1998)
- S. Nagasawa, "Effect of Oxidation on Single-wall Carbon Nanotubes", Chem. Phys. Lett, 328, pp.374~380 (2000)
- F. H. Gojny, "Surface Modified Multi-wall Carbon Nanotubes in CNT", epoxy-composites, 2003, pp.370, 820~824
- H. Hiura, "Opening and Purification of Carbon Nanotubes in High Yields", Adv. Mater, 7, pp.275~276 (1995)
- T. Laha, "Tensile Properties of Carbon Nanotube Reinforced Aluminum Nanocomposite Fabricated by Plasma Spray Forming", Composites: Part A, 40, pp.589~594 (2009)
- A. Gohel, "Field Emission Properties of N2 and Ar Plasma-treated Multi-wall Carbon nanotubes", Carbon, 43, pp.2530~2535 (2005)
- T. J. Lee, "Ultraviolet Irradiated Ozone Treatment of a Metal Catalyst for the Large-scale Synthesis of Single-walled Carbon Nanotubes with Small, Uniform Diameters", Carbon, 46, pp.1443~1449 (2008)
- M. Liu, "Chemical Modification of Single-walled Carbon Nanotubes with Peroxytrifluoroacetic Acid", Carbon, 43, pp.1470~1478 (2005)
- M. J. O'Connel, "Reversible Water Solubilization of Single Walled Carbon Nanotubes by Polymer Wrapping", Chem. Phys. Letters, 342, pp.265~271 (2001)
- W. Ding, "Direct Observation of Polymer Sheathing in Carbon Nanotube-Polycarbonate Composites", Nano letters, 3, pp.1593~1597 (2003)
- S. Kumar, "Structure and Properties of Polyacrylonitrile", single wall Carbon Nanotube Composite films, 2005, pp.46, 3001~3005