본문 바로가기
KERD
논문KCI 등재

차량용 에어컨에 사용되는 냉매 및 냉동기유의 기술 동향

Development Trends of Refrigerant and Refrigerant Oil for Automotive Air-conditioner

황승용|이대웅
한국트라이볼로지학회 (Korean Tribology Society)|2019.08|한국트라이볼로지학회지 (Tribology and Lubricants)|제35권 제4호|pp. 206-214|DOI https://doi.org/10.9725/kts.2019.35.4.206

1

조회

0

다운로드

1

인용

0

참고문헌

키워드

자동차DPGWPautomobile냉매refrigerant oil에어컨 시스템지구 온난화 지수오존층파괴 지수냉동 윤활유air-conditioning systemrefrigerant
주제분류기계공학

초록

This study investigates alternative refrigerants and refrigerant oils as well as the tendency of protecting the global environment in view of automobile air-conditioning systems. Since decades, the R12 refrigerant is not used in automobile air-conditioners because of the ozone depletion potential (ODP) problem, and for the last 20 years, the ODP-free R134a refrigerant is leading the new automotive air-conditioning market. However, owing to its high global warming potential (GWP), the R134a refrigerant use in automobile air-conditioning system is also prohibited by law, and alternative refrigerants with a low GWP need to be proposed. Therefore, recently, the application of R1234yf, R152a, or other alternative refrigerants has started worldwide. By contrast, natural refrigerant R744 was introduced in the market several years ago by VDA (Verband Der Automobilindustrie), which is a German association in the automotive industry. This study also deals with refrigerant oils. For a long time, polyalkylene glycol (PAG) oil has been traditionally used with automobile air-conditioners, and polyolester (POE) oil is suitable for HEV, PHEV, and EV air-conditioning systems, where it is used by the electrically driven compressor owing to its excellent electrical insulation properties. Finally, PAG is an excellent lubricant for all the R134a, R152a, R1234yf, and R744 refrigerants, and has the advantage that it can be applied rapidly to alternative refrigerant air-conditioning systems.

Abstract

This study investigates alternative refrigerants and refrigerant oils as well as the tendency of protecting the global environment in view of automobile air-conditioning systems. Since decades, the R12 refrigerant is not used in automobile air-conditioners because of the ozone depletion potential (ODP) problem, and for the last 20 years, the ODP-free R134a refrigerant is leading the new automotive air-conditioning market. However, owing to its high global warming potential (GWP), the R134a refrigerant use in automobile air-conditioning system is also prohibited by law, and alternative refrigerants with a low GWP need to be proposed. Therefore, recently, the application of R1234yf, R152a, or other alternative refrigerants has started worldwide. By contrast, natural refrigerant R744 was introduced in the market several years ago by VDA (Verband Der Automobilindustrie), which is a German association in the automotive industry. This study also deals with refrigerant oils. For a long time, polyalkylene glycol (PAG) oil has been traditionally used with automobile air-conditioners, and polyolester (POE) oil is suitable for HEV, PHEV, and EV air-conditioning systems, where it is used by the electrically driven compressor owing to its excellent electrical insulation properties. Finally, PAG is an excellent lubricant for all the R134a, R152a, R1234yf, and R744 refrigerants, and has the advantage that it can be applied rapidly to alternative refrigerant air-conditioning systems.

참고문헌 (34)

  1. ASHRAE, "100 Years of Refrigeration; A Supplement to ASHRAE Journal", ASHRAE Journal, pp.S31~S34 (2004)
  2. Song, Y. K., "The State of the Art of the Automo-tive Air-Conditioning Systems Using HFC-134a", Auto Journal, 16(2), pp.22~32 (1994)
  3. United nations environment programme, "Montreal protocol on substances that deplete the ozone layer, Final act", ~ (1987)
  4. Kim, H. J., "Computer Simulation of Automotive Air-Con-ditioners using HFC134a, CFC12", Autumn confer-ence of SAREK, pp.257~262 (1995)
  5. Menstruate, D., "A(Preliminary) Analysis of the Kyoto Protocol: Using the OECD Green Model", 1~32 (1998)
  6. "Directorate-general environment, consultation paper, How to considerably reduce greenhouse gas emis-sions due to mobile air conditions", European Com-mission, 4~ (2003)
  7. 최정원, "자동차 공조용 대체 냉매로서의 H냉매에 대한 연구", 한국자동차공학회 논문집, 15(6), pp.170~176 (2007), 한국자동차공학회
  8. Minor, B. H., "Dupont Next Generation Refrigerant MAC Global Industry Solution", SAE 7th Alterna-tive Refrigerant Systems Symposium (2006)
  9. Perfor-mance Evaluation of an Automotive Air Conditioner with Expansion Valve control Using CFC-12 &HFC-134a Refrigerants, "Bourini, E.", SAE, ~, pp.Paper 910218 (1991)
  10. Kang, J., "The effect of refrigerator oil on the evaporation heat transfer coefficient inside plate type evaporator for automotive air conditioner", KSAE Fall Conference Proceedings, 943927, pp.391~396 (1994)
  11. Trends of Low GWP Refrigerants, "Lim, B. H.", 200~201, pp.SAREK18-W-054m (2018)
  12. Global regulation on HFC refrigerant and response strategies, "Park, J.", 53~57, pp.SAREK17-W-016 (2017)
  13. Updated Safety Standards and Recent Risk Assess-ments using Low GWP Refrigerants, "Lim, B. H.", 51~52, pp.SAREK17-W-015 (2017)
  14. Poten-tial application of R-152a Refrigerant in vehicle cli-mate control, Part II, "Ghobane, M.", SAE, ~, pp.Paper 2004-01-0918 (2004)
  15. Life Cycle Analysis Framework; A Comparison of HFC-134a, HFC-134a Enhanced, HFC-152a, R744, R744 Enhanced and R290 Automotive Refrigerant Systems, "Hill, W.", SAE, ~, pp.Paper 2005-01-1511 (2005)
  16. The Devel-opment Trend of A, "C system using alternative refrigerant for a vehicle", Lee, H., 2016, pp.301~304, SAREK16-W-081
  17. Won, J. P, "Technology Trends of Automotive Refrigerant Automotive Air Conditioning System for Climate Change Regulations", Magazine of the SAREK, 39(2), pp.10~16 (2010)
  18. Del, D., "Heat transfer and pressure drop during condensation of the low GWP refrigerant HFO1234yf", International Journal of Refrigeration, 33, pp.1307~1318 (2010)
  19. HFO-1234yf low GWP refrigerant LCCP analysis, "Koban, M.", SAE, ~, pp.Paper 2009-01-0179 (2009)
  20. ASHRAE, "SHRAE Standard 34-2010, Designa-tion and safety classification of refrigerants", ~ (2010)
  21. A Study on the compli-ance of IEC standard to use of A2L refrigerant for KC safety standard, "Choi, J.", 192~194, pp.SAREK18-W-052 (2018)
  22. Safety issues in the application of a flammable refrigerant gas in MAC systems: the OEM perspective, "Moforte, R.", SAE, ~, pp.Paper 2009-01-0541 (2009)
  23. Vehicle hot surface ignition and mitigation measures of R-1234yf refrigerant for MAC systems, "Seybold, L.", SAE, ~, pp.Paper 2014-01-0422 (2014)
  24. Automotive Air-conditioning Electrically Driven Compressor, "Makino, M.", SAE, ~, pp.Paper 2003-01-0734 (2003)
  25. Yoo, J., "Alternative refrigerant MAC system to prevent global warming", KSAE Annual Conference Pro-ceedings, pp.298~305 (2009)
  26. Lee, H., "An Rxperimental Study on Direct Expansion System's Performance of Mobile Alternative Refrigerant Air Conditioning System", KASE Annual Conference Proceedings, pp.423~428 (2012)
  27. 이대웅, "자동차용 CO2 에어컨 시스템의 성능 특성에 관한 실험적 연구", 한국자동차공학회 논문집, 23(1), pp.18~24 (2015), 한국자동차공학회[DOI]
  28. Global Trends of the Technology for Low GWP Refrigerant, "Kim, O. J.", 130~133, pp.SAREK15-W-036 (2015)
  29. ASHRAE, "ASHRAE Handbook, Refrigeration, SIed., Ch.7", pp.1~24 (1994)
  30. ASHRAE, "ASHRAE Handbook, Refrigeration System and Applications, Ch.29" (1998)
  31. Refrigerant and lubricant dis-tribution in MAC system, "Jin, S.", SAE, ~, pp.Paper 2013-01-1496 (2013)
  32. Mscibility of lubri-cants with low GWP refrigerant, "Kwon, J.", 47~48, pp.SAREK16-W-012 (2016)
  33. An Experiemntal Study on PAG Oil Separation Charac-teristics of an Oil Separator for a CO2 Refrigeration system, "Cho, E.", 271~276, pp.SAREK 08-S-044 (2008)
  34. Lee, S., "An Experimmental Study on Oil Return of PAG and POE from Liquid Line for a CO2 Refrig-eration System", Magazine of the SAREK, 38(12), pp.61~65 (2009)

이 간행물의 다른 논문 (6건)

구형 및 평면 원자현미경 탐침에 대한 2차원 소재의 마찰 특성Bien-Cuong Tran Khac, 정구현pp. 199-205이중 제로터의 설계 및 응용 가능성에 대한 연구이성철pp. 215-221가속노화조건 하 연료접촉 고무오링의 수명예측 및 누유시험 연구홍진숙, 정병훈, 한정식, 정근우, 김영운, 권영일pp. 222-228세 물체 간 마찰 완전 접촉 문제의 응력 특이성 거동김형규pp. 229-236니들 롤러 베어링의 피로 수명 향상에 대한 연구다리스렝 스르멩닥와, AMANOVAUEZHAN, 편영식pp. 237-243
원문 보기