열 경계 조건이 다른 틸팅패드저널베어링의 성능
Performance of Tilting Pad Journal Bearings with DifferentThermal Boundary Conditions
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study shows the effect of the thermal boundary condition around the tilting pad journal bearing on the static and dynamic characteristics of the bearing through a high-precision numerical model. In many cases, it is very difficult to predict or measure the exact thermal boundary conditions around bearings at the operating site of a turbomachine, not even in a laboratory. The purpose of this study is not to predict the thermal boundary conditions around the bearing, but to find out how the performance of the bearing changes under different thermal boundary conditions. Lubricating oil, bearing pads and shafts were modeled in three dimensions using the finite element method, and the heat transfer between these three elements and the resulting thermal deformation were considered. The Generalized Reynolds equation and three-dimensional energy equation that can take into account the viscosity change in the direction of the film thickness are connected and analyzed by the relationship between viscosity and temperature. The numerical model was written in in-house code using MATLAB, and a parallel processing algorithm was used to improve the analysis speed. Constant temperature and convection temperature conditions are used as the thermal boundary conditions. Notably, the conditions around the bearing pad, rather than the temperature boundary conditions around the shaft, have a greater influence on the performance changes of the bearing.
Abstract
This study shows the effect of the thermal boundary condition around the tilting pad journal bearing on the static and dynamic characteristics of the bearing through a high-precision numerical model. In many cases, it is very difficult to predict or measure the exact thermal boundary conditions around bearings at the operating site of a turbomachine, not even in a laboratory. The purpose of this study is not to predict the thermal boundary conditions around the bearing, but to find out how the performance of the bearing changes under different thermal boundary conditions. Lubricating oil, bearing pads and shafts were modeled in three dimensions using the finite element method, and the heat transfer between these three elements and the resulting thermal deformation were considered. The Generalized Reynolds equation and three-dimensional energy equation that can take into account the viscosity change in the direction of the film thickness are connected and analyzed by the relationship between viscosity and temperature. The numerical model was written in in-house code using MATLAB, and a parallel processing algorithm was used to improve the analysis speed. Constant temperature and convection temperature conditions are used as the thermal boundary conditions. Notably, the conditions around the bearing pad, rather than the temperature boundary conditions around the shaft, have a greater influence on the performance changes of the bearing.
참고문헌 (19)
- Ha, H., "A study on the effects of temperature rise and turbulence on the performance of large tiling pad journal bearings", J. Korean Soc. Tribol. Lubr. Eng, 9(1), pp.22~31 (1993)[DOI]
- Kim, J., "TEHD analysis for tilting-pad journal bearings using upwind finite element method", Tribol. Trans, 37, pp.771~783 (1994)
- Kim, J., "Dynamic characteristics of TEHD tilt pad journal bearing simulation including multiple mode pad flexibility model", J. Vib. Acoust, 117, pp.123~135 (1995)
- Gadangi, R. K., "Transient analysis of tilt pad journal bearings including effects of pad flexibility and fluid film temperature", J. Tribol, 117, pp.302~307 (1995)
- Monmousseau, P., "Frequency effects on the TEHD behavior of a tilting-pad journal bearing under dynamic loading", J. Tribol, 121, pp.321~326 (1999)
- Nicholas, J. C., "Tilting pad journal bearings with spray-bar blockers and by-pass cooling for high speed, high load applications", Proceedings of the 32nd Turbomachinery Symposium, pp.8~11 (2003)
- Tschoepe, D. P., "Measurements versus predictions for the static and dynamic characteristics of a four-pad, rocker-pivot, tilting-pad journal bearing", J. Eng. Gas. Turbines Power, 136, pp.052501~ (2014)
- Suh, J., "Three-dimensional dynamic model of TEHD tilting-pad journal bearing-Part I : Theoretical modeling", J. Tribol, 137, pp.041703~ (2015)
- Suh, J., "Three-dimensional dynamic model of TEHD tilting-pad journal bearing-Part II : Parametric studies", J. Tribol, 137, pp.041704~ (2015)
- El-Butch, A., "Transient analysis of misaligned elastic tilting-pad journal bearing", Tribol. Int, 38, pp.41~48 (2005)
- Suh, J., "Pivot design and angular misalignment effects on tilting pad journal bearing characteristics : Four pads for load on pad configuration", Tribol. Int, 102, pp.580~599 (2016)
- 서준호, "열변형으로 인한 틸팅패드 저널베어링의 예압 변화", 한국트라이볼로지학회지, 32(1), pp.1~8 (2016), 한국트라이볼로지학회[DOI]
- 이동현, "터빈 시뮬레이터용 틸팅패드 저널베어링의 열윤활 해석 및 패드 온도 측정", 한국트라이볼로지학회지, 33(3), pp.112~118 (2017), 한국트라이볼로지학회[DOI]
- 이동현, "초임계 CO2 발전용 파워터빈을 지지하는 틸팅패드베어링의 열윤활 해석 및 패드 온도 측정", 한국트라이볼로지학회지, 34(2), pp.43~48 (2018), 한국트라이볼로지학회[DOI]
- Yang, P., "Experimental research on the tilting pad bearing under the high temperature of inlet oil", Ind. Lubr. Tribol, 70, pp.935~941 (2018)
- Yang, J., "Three-dimensional thermoelasto-hydrodynamic computational fluid dynamics model of a tilting pad journal bearing-Part I : Static response", J. Tribol, 141, pp.1~44 (2019)
- Yang, J., "Three-dimensional thermoelasto-hydrodynamic computational fluid dynamics model of a tilting pad journal bearing-Part II : Dynamic response", J. Tribol, 141, pp.TRIB18-144~ (2019)
- Someya, T., "Journal-Bearing Databook" (1989), SpringerVerlag Berlin
- Kulhanek, C., "Measured Static and Rotordynamic Coefficient Results for a Rocker-Pivot, Tilting-Pad Bearing with 50 and 60% Offsets", J. Eng. Gas. Turbines Power, 134, pp.052505~ (2012)