RFID 안테나용 전도성 프린팅을 위한 PET 직물의 최적 전처리 공정연구 및 성능평가
A Study on Pre-treatment and Performance Evaluation for Printing RFID Antenna with Conductive Paste
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Nowadays, terms such as ‘Smart Textile’, ‘Intelligent Textile’ and ‘Wearable Computing’ are commonly used in everyday contexts. And radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. These products are required technologies which are textile treatments, printing, ink, etc. Durability of textile substrates is an essential marker for conductive ink printing process. Especially, heat stability is important, since conductive ink should be processable (annealing, curing) at temperatures below 150℃. This study was application of RFID on textiles. The textile pre-treatment processes should be carried out to use RFID antenna on textiles.
Abstract
Nowadays, terms such as ‘Smart Textile’, ‘Intelligent Textile’ and ‘Wearable Computing’ are commonly used in everyday contexts. And radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. These products are required technologies which are textile treatments, printing, ink, etc. Durability of textile substrates is an essential marker for conductive ink printing process. Especially, heat stability is important, since conductive ink should be processable (annealing, curing) at temperatures below 150℃. This study was application of RFID on textiles. The textile pre-treatment processes should be carried out to use RFID antenna on textiles.
참고문헌 (12)
- I. Kazani, "Electrical Conductive Textiles Obtained by Screen Printing", Fibers and Textiles, 20(1), pp.57~ (2012)
- P. Xue, "Wearable Electronics and Photonics", Woodhead Publishing Series in Textiles, 46, pp.81~ (2007)
- E. Gasana, "Electroconductive Textile Structures through Electroless Deposition of Polyaramide Surfaces", Surface and Coatings Technology, 201, pp.3547~ (2006)
- J. Banaszczyk, "Current Distribution Modelling in Electroconductive Fabrics", Fibers and Textiles, 17(2), pp.28~ (2009)
- D. J. Kim, "Ink Jet Printing of Silver Conductive Tracks on Flexible Substrates", Molecular Crystals and Liquid Crystals, 459(45), pp.337~ (2006)
- Byoungyoon Lee, "A low-cure-temperature copper nano ink for highly conductive printed electrodes", Current Applied Physics, 9(2), pp.157~160 (2009), 한국물리학회
- D. Meoli, "Interactive Electronic Textile Development", J. of Textile and Apparel Technology and Management, 2(2), pp.1~ (2002)
- S. Merilampi, "The Characterzation of Electrically Conductive Silver Ink Patterns on Flexible Substrates", Microelectronics Reliability, 49(7), pp.782~ (2009)
- Y. L. Yang, "Thick Film Textile Based Amperometric Sensors and Biosensoers", Royal Society of Chemistry, 135, pp.1230~ (2010)
- Y. Kim, "Electrical Characterization of Screen Printed Circuits on the Fabric", IEEE Transaction on Advanced Packaging, 33(1), pp.196~ (2010)
- 류종우, "물리화학적 조건에 따른 은코팅 전도사의 전기적 특성", 한국염색가공학회지, 23(1), pp.43~50 (2011), 한국염색가공학회
- 양성용, "One-step형 친수무공형 폴리우레탄 수지 합성과 코팅 처리한 의류용 직물의 물성", 한국염색가공학회지, 23(2), pp.131~139 (2011), 한국염색가공학회