직각 쐐기와 응착접촉 하는 반무한 평판 내 전위: 제1부 - 보정 함수 유도
Dislocation in Semi-infinite Half Plane Subject to AdhesiveComplete Contact with Square Wedge: Part I - Derivationof Corrective Functions
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper is concerned with an analysis of a surface edge crack emanated from a sharp contact edge. For a geometrical model, a square wedge is in contact with a half plane whose materials are identical, and a surface perpendicular crack initiated from the contact edge exists in the half plane. To analyze this crack problem, it is necessary to evaluate the stress field on the crack line which are induced by the contact tractions and pseudo-dislocations that simulate the crack, using the Bueckner principle. In this Part I, the stress filed in the half plane due to the contact is re-summarized using an asymptotic analysis method, which has been published before by the author. Further focus is given to the stress field in the half plane due to a pseudo-edge dislocation, which will provide a stress solution due to a crack (i.e. a continuous distribution of edge dislocations) later, using the Burgers vector. Essential result of the present work is the corrective functions which modify the stress field of an infinite domain to apply for the present one which has free surfaces, and thus the infiniteness is no longer preserved. Numerical methods and coordinate normalization are used, which was developed for an edge crack problem, using the Gauss-Jacobi integration formula. The convergence of the corrective functions are investigated here. Features of the corrective functions and their application to a crack problem will be given in Part II.
Abstract
This paper is concerned with an analysis of a surface edge crack emanated from a sharp contact edge. For a geometrical model, a square wedge is in contact with a half plane whose materials are identical, and a surface perpendicular crack initiated from the contact edge exists in the half plane. To analyze this crack problem, it is necessary to evaluate the stress field on the crack line which are induced by the contact tractions and pseudo-dislocations that simulate the crack, using the Bueckner principle. In this Part I, the stress filed in the half plane due to the contact is re-summarized using an asymptotic analysis method, which has been published before by the author. Further focus is given to the stress field in the half plane due to a pseudo-edge dislocation, which will provide a stress solution due to a crack (i.e. a continuous distribution of edge dislocations) later, using the Burgers vector. Essential result of the present work is the corrective functions which modify the stress field of an infinite domain to apply for the present one which has free surfaces, and thus the infiniteness is no longer preserved. Numerical methods and coordinate normalization are used, which was developed for an edge crack problem, using the Gauss-Jacobi integration formula. The convergence of the corrective functions are investigated here. Features of the corrective functions and their application to a crack problem will be given in Part II.
참고문헌 (14)
- Kim, H.-K, "Asymptotic Analysis of an Adhered Complete Contact between Elastically Dissimilar Materials", J. Strain Analy (2014)
- 김형규, "응착 완전 접촉 문제에서 접촉면 미끄럼 현상에 관한 고찰", 한국트라이볼로지학회지, 36(3), pp.147~152 (2020), 한국트라이볼로지학회[DOI]
- Roberts, G, "The Concentration of Stress in Cladding Produced by the Expansion of Cracked Fuel Pellets", Nucl. Eng. Des, 47, pp.257~266 (1978)
- Ranjan, G. V, "Determination of Stress within Zircaloy Cladding due to Pellet-Cladding Interaction", Nucl. Eng. Des, 56, pp.263~272 (1980)
- Nakatsuka, M, "Theoretical and Experimental Analyses of Cladding Strain Produced by Expansion of Cracked Fuel Pellets", Nucl. Eng. Des, 65, pp.197~204 (1981)
- Michel, B, "A New Phenomenological Criterion for Pellet-Cladding Interaction Rupture", Nucl. Eng. Des, 238, pp.1612~1628 (2008)
- Marchal, N, "Finite Element Simulation of Pellet-Cladding Interaction(PCI)in Nuclear Fuel Rods", Comp. Mater. Sci, 45, pp.821~826 (2009)
- Hills, D. A, "Solution of Crack Problems-The Distributed Dislocation Technique-" (1996), Kluwer Academic Publishers
- Dundurs, J, "Mathematical Theories of Dislocations", pp.70~115 (1969), ASME Pub
- Bueckner, H. F, "A Novel Principle for the Computation of Stress Intensity Factors", Z. Anew. Math. Mech, 50, pp.529~546 (1970)
- Williams, M. L, "Stress Singularities resulting from Various Boundary Conditions in Angular Corners of Plates in Extension", J. Appl. Mech, 19, pp.526~528 (1952)
- Erdogan, F, "Methods of Analysis and Solutions of Crack Problems", pp.368~425 (1973), Noordhoff
- Li, Y, "Stress Intensity Factor Solutions for Kinked Surface Cracks", J. Strain Analy, 25, pp.21~27 (1990)
- Wolfram, "Mathematica, version 13.0.1.0" (2022)