솔벤트 염료를 이용한 고강도 폴리에틸렌(HTPE) 필라멘트사의 염색성 및 기계적 물성 평가
Dyeing Characteristics and Mechanical Properties of High Tenacity Polyethylene(HTPE) Filament using Solvent Dyes
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at 120℃ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.
Abstract
High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at 120℃ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.
참고문헌 (26)
- E. P. Kim, "Dyeing Method of Ultra High Molecular Weight Polyethylene Fiber and Work Glovesmade from Dyed Ultra High Molecular Weight Polyethylene Fiber using This", KR101287041B1, ~ (2013)
- T. K. Kim, "Dyeing Method of Ultra-High Molecular Weight Polyethylene", KR10-1172860-0000, ~ (2012)
- Y. A. Son, "DyeingMethod of Polyolefine Based Fiber", KO10-1590732-0000, ~ (2016)
- S. U. Kim, "Steel Fiber Floating in Water, Ultra High Molecular Weight Polyethylene", pp.1~19 (2012), DYETEC
- P. Smith, "Ultra-High-Strength Polyethylene Filaments by Solution Spinning-Drawing", J. of Materials Science, 15(2), pp.505~ (1980)
- 김태경, "순수 폴리올레핀(PP", UHMWPE) 소재용 초소수성 보라색 염료의 합성, 2013, pp.25(3), 165~171[DOI]
- 김태경, "450-500nm의 최대흡수를 가지는 순수 폴리올레핀 소재용초소수성 오렌지 염료의 합성", 한국염색가공학회지, 26(3), pp.165~172 (2014), 한국염색가공학회
- 조나영, "순수 폴리올레핀 소재용 청록색 염료의 합성", 한국염색가공학회지, 28(3), pp.156~163 (2016), 한국염색가공학회
- 김태경, "알킬아닐린을 디아조성분으로 활용한 디스아조계 초소수성 적색염료의 합성", 한국염색가공학회지, 27(1), pp.27~34 (2015), 한국염색가공학회
- R. Mannhold, "Calculation of Molecular Lipophilicity: State-of-the-art andComparison of Log PMethods onMore than 96,000Compounds", J. of Pharmaceutical Sciences, 98, pp.861~ (2009)
- 김태경, "Calculation and Analysis of Hydrophobicity of the Dyes Synthesized for Unmodified Polypropylene Fibers Using Molecular Descriptors", 한국염색가공학회지, 21(5), pp.21~26 (2009), 한국염색가공학회
- T. K. Kim, "Synthesis and Application of Alkyl-SubstitutedDisazoYellowDyes forUnmodified Polypropylene Fiber", Fibers and Polymers, 10(2), pp.148~ (2009)
- 박종호, "디아미노피리딘아조계 Red 분산염료들의 합성과 염색성", 한국염색가공학회지, 17(6), pp.1~10 (2005), 한국염색가공학회
- Tongyi Middle Special Type Xianwei Technolofy Department LimitedCompany, "An Ultra-High Molecular Weight Polyethylene FiberDyeingMethod", CN2013-10744307, ~ (2013)
- 김태경, "순수 폴리프로필렌 섬유용 알킬치환 안트라퀴논계 염료의 색상발현 특성", 한국염색가공학회지, 19(6), pp.28~34 (2007), 한국염색가공학회
- T. K. Kim, "Synthesis andApplication ofAlkyl-SubstitutedRedDyes forUnmodified Polypropylene Fibers", Fibers and Polymers, 12, pp.174~ (2011)
- A. K. Ghose, "Prediction of Hydrophobic(Lipophilic) Properties of Small Organic Molecules using Fragmental Methods:An Analysis of ALOGP and CLOGP Methods", The J. of Physical Chemistry A, 102, pp.3762~ (1998)
- K. R. Cousins, "Computer Review of Chem Draw Ultra 12.0", J. of AmericanChemical Society, 133, pp.8388~ (2011)
- I. V. Tetko, "ALOGPS(HTTP:", Abstracts of Papers of the American Chemical Society, pp.2016[DOI]
- X. Y. Wang, "Melting of UltrahighMolecularWeight Polyethylene", J. of Applied Polymer Science, 34, pp.593~ (1987)
- E. W. Lee, "A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of Drawn PP Filaments", J. of The Korean Society of Industrial Application, 5(4), pp.361~ (2002)
- S. H. Yoon, "The Interpretation ofDyeingBehavior of Poly(Trimethylene Terephthalate) Fiber with a Disperse Dye", Textile Coloration and Finishing, 13(4), pp.249~ (2001)
- K. S. Ko, "Strength Tests of Imported NYLON 6 and its Variation After Dying", The Korean Society of Fisheries Technology, 6(1), pp.14~ (1970)
- E. W. Lee, "A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of PET Filaments", J. of The Korean Society of Industrial Application, 6(4), pp.387~ (2003)
- 정인일, "두 종류의 분산염료를 이용한 폴리에스테르 섬유의 초임계유체 염색", 청정기술, 17(2), pp.110~116 (2011), 한국청정기술학회
- D. J. Han, "DisperseDyes: ADyeChemists Perspectives", Aatcc Review, 3(1), pp.17~ (2003)