하이브리드 탄소섬유 적층구조에 따른 복합재료의 기계적 특성 연구
Study on the Mechanical Properties of Hybridized Carbon Fiber Composite According to Stacking Structure
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As carbon fiber reinforced composites(CFRP) are widely used in aerospace, automobile, marine, and sports goods applications, they have been studied extensively by various researchers. However, CFRP have been pointed out because of machining problems such as delamination and burr phenomenons. Especially, hole machining process, drilling, has non-smooth features on inlet and outlet surfaces of drilled hole. This kind of machining problem can be controlled to some extent by using high modulus pitch- CF, which has considerable effects on fracture behavior of composite compared with only PAN CF composite. Therefore, PAN and pitch hybridized CF composites were prepared having high strength and modulus. The results demonstrate that the hybrid CFRP specimens with pitch CF offer the good potential to enhance modulus as well as strength properties. Dynamic mechanical, flexural, and impact properties were measured and analyzed. Morphological surface of the composites were also observed by IFS-28, canon after hole machining.
Abstract
As carbon fiber reinforced composites(CFRP) are widely used in aerospace, automobile, marine, and sports goods applications, they have been studied extensively by various researchers. However, CFRP have been pointed out because of machining problems such as delamination and burr phenomenons. Especially, hole machining process, drilling, has non-smooth features on inlet and outlet surfaces of drilled hole. This kind of machining problem can be controlled to some extent by using high modulus pitch- CF, which has considerable effects on fracture behavior of composite compared with only PAN CF composite. Therefore, PAN and pitch hybridized CF composites were prepared having high strength and modulus. The results demonstrate that the hybrid CFRP specimens with pitch CF offer the good potential to enhance modulus as well as strength properties. Dynamic mechanical, flexural, and impact properties were measured and analyzed. Morphological surface of the composites were also observed by IFS-28, canon after hole machining.
참고문헌 (13)
- H. Adam, "Carbon Fibre in Automotive Applications", Mater. Design, 18, pp.349~ (1997)
- S. J. Park, "The Effects of MoSi2 on the OxidationBehavior ofCarbon", carbonComposites, 2001, pp.39, 1229~
- W. S. Miller, "Recent Development in Aluminium Alloys for the Automotive Industry", Mater. Sci. Eng., A280, pp.37~ (2000)
- K. Chawla, "FibrousMaterials" (2016), Cambridge University Press
- K. Naito, "Tensile Properties of Ultrahigh Strength PAN-based, Ultrahigh Modulus Pitch-based and High Ductility Pitch-based Carbon Fibers", Carbon, 46, pp.189~ (2008)
- J. Zeng, "Processing and Properties of Poly (methylmethacrylate)", carbon Nanofiber Composites, 2004, pp.35, 245~
- J. B. Donnet, "InCarbon Fibers" (1984), Marcel Dekker
- E. Fitzer, "Technical Status and Future Prospects of Carbon Fibres and their Application in Composites with Polymer Matrix(CFRPs), Carbon Fibers and their Composites", pp.3~45 (1985), Springer
- D. A. Cato, "FlowBehavior ofMesophase Pitch", Carbon, 41, pp.1411~ (2003)
- J. P. Davim, "Study of Delamination in Drilling Carbon Fiber Reinforced Plastics(CFRP)using Design Experiments", Composite Structures, 59, pp.481~ (2003)
- S. Ahmad, "Machining of Polymer Composites" (2009), Springer
- D. Liu, "AReviewofMechanicalDrilling forComposite Laminates", Composite Structures, 94, pp.1265~ (2012)
- N. Baral, "Delamination Behaviour of Very High Modulus Carbon", epoxy Marine Composites, 2008, pp.68, 995~