바인더의 공중합체 조성에 따른 안료잉크의 발색성 및 견뢰도 연구
Color Strength and Fastness of Pigment Ink with Various Binder Monomer Compositions
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with -41.90℃ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.
Abstract
The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with -41.90℃ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.
참고문헌 (13)
- Y. Yang, "Improvement of the Lightfastness of Teactive Inkjet Printed Cotton", Dyes and Pig-ments, 74(1), pp.154~ (2007)
- L. A. W. Abdou, "Synthesis of Nanoscale Binders throughMiniemulsion Polymerization for Textile Pigment Applications", Industrial and Engineering Chemistry Research, 52(6), pp.2195~ (2013)
- C. Sayer, "MolecularWeightDistribution inComposition Controlled EmulsionCopolymerization", PolymerChemistry, 38(7), pp.1100~ (2000)
- S. Parouti, "A Comprehensive Experimental Investigation of the Ethyl Methacrylate", butylAcrylate, Polymer Reaction Engineering, pp.2003, 11(4)[DOI]
- S. Krishnan, "Influence of Chain Transfer Agent on the Cross-linking of Poly(N-butyl methacrylate-co-N-methylol acrylamide)Latex Particles and Films", Macromolecules, 36(10), pp.3511~ (2003)
- C. H. Xue, "Preparation and Application of Nanoscale Microemulsion as Binder for Fabric Inkjet Printing", Colloids and Surfaces A : Physicochemical and Engineering Aspects, 287(1-3), pp.147~ (2006)
- E. B. Lami, "Oraganic-Inorganic Nanostructured Colloids", J. of Nanoscience and Nanotechnology, 2(1), pp.1~ (2002)
- K. Landfester, "Polyreactions inMimiemulsions", Macromolecular Rapid Communication, 22(12), pp.869~ (2001)
- J. W. Gooch, "WaterborneOilmodified Polyurethane Coatings via HybridMiniemulsion Polymerization", J. of Applied Polymer Science, 76(1), pp.105~ (2000)
- Y. T. Choi, "Polymerization of StyreneMiniemulsions", J. of Polymer Science : Polymer Chemistry Edition, 23(12), pp.2973~ (1985)
- M. A. Bradley, "Miniemulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate by Ultrasonic Initiation", Macromolecules, 38(15), pp.6346~ (2005)
- D. Xu, "Inkjet Printing of Polymer Solutions and the Role of Chain Entanglment", J. of Materials Chemistry, 17(46), pp.4902~ (2007)
- A. S. Johns, "Ink-jet Printing ofHighMolecularWeight Polymers inOil inWaterEmulsions", ACS AppliedMaterials and Interfaces, 9(27), pp.22918~ (2017)