레이저 직접 패터닝에 의한 폴리이미드의 표면 특성 제어
Tailoring Surface Properties of Polyimides by Laser Direct Patterning
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a comprehensive investigation was conducted on the morphological and property changes of laser-induced nanocarbon (LINC) as a function of laser process parameters. LINC was formed on the surfaces of polyimide films with different backbone structures under various process conditions, including laser power, scan speed, and resolution. Three different forms of LINC electrodes (i.e., continuous 3D porous graphene, wooly nanocarbon fibers, line cut) were formed depending on the laser power and scan speed. Furthermore, heteroatom doping induced from the chemical structure of the polyimide during laser patterning was found to be effective in modifying the electrical properties of LINC electrodes. The LINC surfaces exhibited different microstructures depending on the laser beam resolution under constant laser power and scan speed, allowing for controllable surface wettability. The correlation between the chemical structure of the polymer substrate, laser process parameters, and carbonized surface properties in this study is expected to be utilized as fundamental understanding for the manufacturing of next-generation carbon-based electronic devices.
Abstract
In this study, a comprehensive investigation was conducted on the morphological and property changes of laser-induced nanocarbon (LINC) as a function of laser process parameters. LINC was formed on the surfaces of polyimide films with different backbone structures under various process conditions, including laser power, scan speed, and resolution. Three different forms of LINC electrodes (i.e., continuous 3D porous graphene, wooly nanocarbon fibers, line cut) were formed depending on the laser power and scan speed. Furthermore, heteroatom doping induced from the chemical structure of the polyimide during laser patterning was found to be effective in modifying the electrical properties of LINC electrodes. The LINC surfaces exhibited different microstructures depending on the laser beam resolution under constant laser power and scan speed, allowing for controllable surface wettability. The correlation between the chemical structure of the polymer substrate, laser process parameters, and carbonized surface properties in this study is expected to be utilized as fundamental understanding for the manufacturing of next-generation carbon-based electronic devices.
참고문헌 (14)
- F. M. Vivaldi, "Three-Dimensional(3D) Laser-Induced Graphene:Structure, Properties, and Application to Chemical Sensing", ACS Applied Materials and Interfaces, 13(26), pp.30245~ (2021)
- J. Lin, "Laser-induced Porous Graphene Films from Commercial Polymers", Nature Communications, 5, pp.5714~ (2014)
- K. H. Nam, "Laser Direct Write of Heteroatom-doped Graphene on Molecularly Controlled Polyimides for Electrochemical Biosensors with Nanomolar Sensitivity", Carbon, 188, pp.209~ (2022)
- M. Yuan, "Facile and Scalable Fabrication of High-Performance Microsuper Capacitors Based on Laser-Scribed In Situ Heteroatom-Doped Porous Graphene", ACS Applied Materials and Interfaces, 13(19), pp.22426~ (2021)
- 박정호, "유연 기판 기반 전기화학 센서 응용을 위한 레이저 유도 그래핀 전극 제작 및 전사 연구", 전기학회논문지, 67(3), pp.406~412 (2018), 대한전기학회
- L. Cao, "Stable and Durable Laser-induced Graphene Patterns Embedded in Polymer Substrates", Carbon, 163, pp.85~ (2020)
- S. Khim, "Temperature-Invariant Large Broadband Polyimide Dielectrics with Multimodal Porous Networks", ACS Applied Polymer Materials, 5(6), pp.4159~ (2023)
- Y. C. Hwang, "Controllable Growth of Porous Morphology in Low Dielectric Polyimides via Thermal-driven Spontaneous Phase Separation", European Polymer Journal, 195, pp.112195~ (2023)
- S. Kim, "Polymer Concentration and Liquid-Liquid Demixing Time Correlation with Porous Structure of Low Dielectric Polyimide in Diffusion-Driven Phase Separation", Polymers, 14(7), pp.1425~ (2022)
- K. H. Nam, "Laser-Induced Fluorinated Graphene for Superhydrophobic Surfaces with Anisotropic Wetting and Switchable Adhesion", Applied Surface Science, 574, pp.151339~ (2022)
- J. Nasser, "Laser Induced Graphene Printing of Spatially Controlled Superhydrophobic", hydrophilic Surfaces, 2020, pp.162, 570~
- B. Chen, "Tuning the Structure, Conductivity, and Wettability of Laser-Induced Graphene for Multiplexed Open Microfluidic Environmental Biosensing and Energy Storage Devices", ACS Nano, 16(1), pp.15~ (2022)
- M. T. Gilavan, "One-Step Fabrication of Low-Resistance Conductors on 3D-Printed Structures by Laser-Induced Graphene", Applied Electronic Materials, 3(9), pp.3867~ (2021)
- L. Liu, "Fluorine Doping : a Feasible Solution to Enhancing the Conductivity of High-resistance Wide Bandgap Mg0. 51Zn0. 49O Active Components", Nature, 5, pp.15516~ (2015)