Performance evaluation of sea water heat exchanger installed in the submerged bottom-structure of floating architecture
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Floating architecture is a type of building that is geographically located on a sea or a river. It floats under the influence of buoyancy, and does not have an engine for moving it. Korea is a peninsula surrounded by sea except on the north side, so floating architectures have been mainly focused on two points: solving the issue of small territory and providing various leisure & cultural spaces. Floating architectures are expected to save energy effectively, if they use sea water heat, which is known to be clean energy with infinite reserves. To use sea water heat as the heat source and/or heat sink, this study proposes a model in which a sea water heat exchanger is embedded in the concrete structure in the lower part of the floating architecture that is submerged under the sea. Based on the results of performance evaluations of the sea water heat exchanger using CFD (computational fluid dynamics) analysis and mock-up experiments under various conditions, it is found out that the temperature difference between the inlet and outlet of the heat exchanger is in the range of 3.06~9.57 °C, and that the quantity of heat transfer measured is in the range of 3,812~7,180 W. The CFD evaluation results shows a difference of 5% with respect to the results of mock-up experiment.
Abstract
Floating architecture is a type of building that is geographically located on a sea or a river. It floats under the influence of buoyancy, and does not have an engine for moving it. Korea is a peninsula surrounded by sea except on the north side, so floating architectures have been mainly focused on two points: solving the issue of small territory and providing various leisure & cultural spaces. Floating architectures are expected to save energy effectively, if they use sea water heat, which is known to be clean energy with infinite reserves. To use sea water heat as the heat source and/or heat sink, this study proposes a model in which a sea water heat exchanger is embedded in the concrete structure in the lower part of the floating architecture that is submerged under the sea. Based on the results of performance evaluations of the sea water heat exchanger using CFD (computational fluid dynamics) analysis and mock-up experiments under various conditions, it is found out that the temperature difference between the inlet and outlet of the heat exchanger is in the range of 3.06~9.57 °C, and that the quantity of heat transfer measured is in the range of 3,812~7,180 W. The CFD evaluation results shows a difference of 5% with respect to the results of mock-up experiment.
참고문헌 (16)
- C. H. Moon, "Sailing of research group on floating architecture", Journal of the Architectural Institute of Korea, 55(09), pp.14~19 (2011)
- H. S. Lee, "An analysis of market situation and industry trend in floating architecture", Proceedings of the Korean Institute of Navigation and Port Research Conference, pp.141~144 (2009)
- B. Kim, "Performance evaluation of types of sea water heat exchanger for floating architecture", Proceedings of the Korean Institute of Navigation and Port Research Conference, pp.287~288 (2013)
- K. I. Hwang, "CFD analysis on performance evaluation of sea water heat exchanger in floating architecture", Proceedings of the Korean Society of Marine Engineering, pp.211~ (2014)
- 김기철, "건물의 냉방을 위한 해수열 취득에 관한 실험적 연구", 한국마린엔지니어링학회지, 29(8), pp.883~890 (2005), 한국마린엔지니어링학회
- K. C. Kim, "A Study on Heat Gain from Seawater for Cooling of Buildings", Ph.D, Dissertation, Department of Architectural Engineering, pp.2006
- 김현주, "채널 간격 변화에 따른 해수냉난방용 판형 열교환기의 열전달과 압력강하에 대한 수치해석적 연구", 한국마린엔지니어링학회지, 38(6), pp.704~709 (2014), 한국마린엔지니어링학회[DOI]
- Y. W. Lee, "Recent floating buildings and design methods", Journal of the Wind Engineering Institute of Korea, 16(04), pp.79~87 (2012)
- J. Yang, "Numerical investigation on a novel shell-and-tube heat exchanger with plate baffles and experimental validation", Journal of the Energy Conversion and Management, 101, pp.689~696 (2015)
- A. N. Asadolahi, "Validation of a CFD model of taylor flow hydrodynamics and heat transfer", Journal of the Chemical Engineering Science, 69(1), pp.541~552 (2012)
- 유소, "CFD 해석을 통한 Plain형 핀-튜브 열교환기의 열전달 및 압력강하특성에 관한 연구", 한국마린엔지니어링학회지, 38(6), pp.615~624 (2014), 한국마린엔지니어링학회[DOI]
- 후영영, "다양한 배플 인자에 따른 셀-튜브 열교환기의 열전달 및 압력강하특성에 관한 수치해석", 한국마린엔지니어링학회지, 38(4), pp.367~375 (2014), 한국마린엔지니어링학회[DOI]
- 곽승현, "열교환기의 나선형 관내 난류유동 수치해석", 한국마린엔지니어링학회지, 37(8), pp.905~910 (2013), 한국마린엔지니어링학회[DOI]
- F. Incropera, "Introduction to Heat Transfer" (2001), Wiley
- Yokogawa Electric Corporation, "MX100", MW100 Data Acquisition Unit Installation and Connection Guide, 2005
- "Daum"[URL]