다부하를 운반하는 무인운반차시스템에서 운반거리의 분석
Analysis of the Travel Distance in the Multiple-load Carrying Automated Guided Vehicle Systems
0
조회
0
다운로드
0
인용
0
참고문헌
초록
Abstract
This paper is to analyze the travel distance and the transport size of the vehicle when the AGV carries multiple-load in the tandem automated guided vehicle systems. The size of multiple-load represents the number of load that the AGV can carry simultaneously. The AGV can carry simultaneously multiple-load that load types are different. The transport system of the manufacturing system is a tandem configuration automated guided vehicle system, which is based on the partitioning of all the stations into several non-overlapping single closed loops. Each loop divided has only one vehicle traveling unidirectionally around it. The AGV of each loop has to have sufficient transport capacity that can carry all loads for given unit time. In this paper, the average loaded travel distance and the size of feasible multiple-load of the vehicle are analyzed. A numerical example is shown.
참고문헌 (24)
- Bischak ,D. P, "An evaluation of the tandem configuration automated guided vehicle system", 6, pp.438~444 (1995)
- Y. A, "Tandem configurations for AGV systems offer simplicity and flexibility", 21, pp.23~27 (1989)
- Y. A, "Tandem configurations for automated guided vehicle systems and the analysis of single vehicle loops", 23, pp.72~82 (1991)
- Egbelu,P. J, "Characterization of automatic guided vehicle dispatching rules", 22, pp.259~274 (1984)
- Egbelu,P. J, "Potential for bidirectional guide path of automated guided vehicle based systems", 24, pp.1075~1097 (1986)
- "Concurrent specification of unit load sizes and automated guided vehicle size in manufacturing system Int. J. of Prod. Economics", 29, pp.695~712 (1993)
- Gaskins, "Flow path design for automated guided vehicle systems", 25, pp.667~676 (1987)
- Gaskins, "Optimal flow path design of unidirectional AGV systems", 28, pp.1023~1030 (1990)
- Goetz, "Guide path design and location of load pick-up", drop-off points for an automated guided vehicle system, 1990, pp.28, 927~941
- Lin, "A load-routing problem in a tandem-configuration automated guided-vehicle system", 32, pp.411~427 (1994)
- Lin,J. T, "An algorithm for routing control of a tandem automated guided vehicle system", 32, pp.2735~2750 (1994)
- B, "Design of an automated guided vehicle-based material handling system for a flexible manufacturing system", pp.1611~1622 (1990)
- Maxwell,W. L, "Design of automatic guided vehicle systems", 14, pp.114~124 (1982)
- Sinriech,D, "The centroid projection method for locating pick-up and delivery stations in single-loop AGV systems", 11, pp.297~307 (1991)
- Sinriech,D, "An economic model for determining AGV fleet size", 30, pp.1255~1268 (1992)
- Sinriech,D, "Impact of empty vehicle flow on performance of single-loop AGV systems", 30, pp.2237~2252 (1992)
- J. M. A, "Material flow systems in manufacturing" (1994)
- Tanchoco,J. M. A, "OSL-Optimal single-loop guide paths for AGVS", 30, pp.665~681 (1992)
- Tomkins,J. A, "Facilities Planning" (1996), Wiley
- J. M. A, "Determination of the total number of vehicles in an AGV-based material transport system", pp.33~51 (1987)
- Bilge Umit, "AGV systems with multi-load carriers: basic issues and potential benefits", 16(3), pp.159~174 (1997)
- Luis G, "Modelling of an automated guided vehicle system", pp.495~511 (1991)
- Ozden,Mufit,1988, "A simulation study of multiple-load-carrying automated guided vehicles in a flexible manufacturing system", pp.~8
- Egbelu,P. J.,1987, "The use of non-simulation approaches in estimating in an automated guided based transport system", pp.~4