고체의 벽면온도에 따른 고온가스 내의 입자거동에 대한 실험 및 수치해석 연구
Experimental and Computational Studies on Particle Behavior in High Temperature Gas with the Various Temperatures of a Solid Wall
0
조회
0
다운로드
1
인용
0
참고문헌
초록
Abstract
The effect of a wall temperature on the soot deposition process from a diffusion flame to a solid wall was investigated in a microgravity environment to attain in-situ observations of the process. The fuel for the flames was an ethylene (C2H4). The surrounding oxygen concentration was 35% with surrounding air temperatures of Ta=600 K. In the study, three different wall temperatures, Tw=300, 600, 800 K, were selected as major test conditions. Laser extinction was adopted to determine the soot volume fraction distribution between the flame and burner wall. The experimental results showed that the maximum soot volume fractions at Tw=300, 800 K were 8.8×10-6, 9.2×10-6, respectively. However, amount of soot deposition on wall surface was decreased because of lower temperature gradient near the wall with increasing wall temperature. A numerical simulation was also performed to understand the motion of soot particles in the flame and the characteristics of the soot deposition to the wall. The results from the numerical simulation successfully predicted the differences in the motion of soot particles by different wall temperature near the burner surface and are in good agreement with observed soot behavior, that is, the “soot line”, in microgravity.
참고문헌 (20)
- "New York Times" (1993)
- "Radiation Heat Transfer in Combustion Systems", 13, pp.97~160 (1987)
- "Deposition of Fine Particles from a Turbulent Liquid Flow", 51(13), pp.3491~3503 (1996)
- "Thermophoretic Deposition of Samll Particles in a Direct Numerical Simulation of turbulent Channel Flow", 41, pp.4167~4182 (1998)
- "Correlation for Ther- mophoretic Deposition of Aerosol Particles onto Cold Plate", 32, pp.473~487 (2001)
- "Mechanism of Smoke Generation in a Flickering Pool Fire", pp.255~264 (1999)
- "Thermophoretic Velocity Measurement of Soot Particles under a Microgravity Condi- tion", 29, pp.2375~2382 (2002)
- "A Study of the Effecct of Oxygen Concentration on the Soot Depo- sition Process in a Diffusion Flame along a Solid Wall by In-Situ Observation in Micro- gravity", 48(4), pp.839~848 (2005)
- "In-situ Observation of the Soot Deposition Process on a Solid Wall with a Diffusion Flame along the Wall", 49(1), pp.167~175 (2006)
- "미소중력환경을 이 용한 벽면근방 확산화염내 매연부착거동의 원위치 관찰", 29(8), pp.907~914 (2005)
- "미소중력환경내의 벽면근방 확산화염 특성에 관한 수치해석", 30(1), pp.140~149 (2006)
- "The Benjamin Cummings Publishing Com- pany", pp.1985~
- "Full Numerical Simulation of a Coflowing Axi- symmetric Jet", (n-premixed combustion) (1989), Thermoscience Div. Stanford University
- "CHEMKIN-III: A FORTRAN Che- mical Kinetics Package for the Analysis of Gas-Phase Chemical and Plasma Kinetics" (1996), Sandia National Lab
- "A FORTRAN Computer Code Pakage for the Evaluation of Gas Phase Viscosities,Con- ductivities and Diffusion Coefficients" (1996), Sandia National Lab
- "On the Motion of Spherical Partiticles in Nonhomogeneous Gases", academic press, pp.323~344 (1961)
- "Agglomeration of Soot Particles in Diffusion Flames under Microgravity", 99, pp.363~370 (1994)
- "Observation of Soot Agglomeration Process with Aid of Ther- mophoretic Force in a Microgravity Jet Di- ffusion Flame", 26(Issues2-4), pp.305~311 (2002)
- "Thermophoresis of Particles in a Heated Boundary Layer", 101, pp.737~758 (1980)
- "On the Theory of Thermal Forces Acting on Aerosol Particles J. of Colloid Sci. 1996년 한국해양대학교 기관공학과 졸업 2005년-현재 한국원자력연구소 연구원.이기영 1978년 한양대학교 기계공학과 졸업 1982년 한국과학기술원 기계공학과 공학석사 1986년-현재 한국원자력연구소 기술총괄실장.윤두호 1996년-현재 한국폴리텍Ⅶ대학 기계설계과 교수.윤석훈 1977년 한국해양대학교 기관학과 졸업 1980-1982 한국기계연구원 연구원", 17, pp.768~780 (1962), 2000년 동대학교 대학원 석사과정수료 2005년 일본북해도대학교 대학원 박사과정수료 1991년 부경대학교 졸업 1994년 한국해양대학교 대학원 석사과정수료 2001년 한국해양대학교 대학원 박사과정수료 1984년 인하대학교 대학원 석사과정수료