본문 바로가기
KERD
논문KCI 등재

회전원판 분무기의 액체미립화 특성에 관한 실험적 연구

An Experimental Study on the Characteristics of Liquid Atomization in a Rotating Disk Atomizer

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류기계공학

초록

Abstract

Apparatus of rotating disk and cup are widely used spray paintings and industrial boilers. This study was conducted experimentally to investigate the characteristics of liquid atomization in a rotating disk atomizer by means of viscous liquid mixed water and glycerin. The purpose of this study are to observe breakup mechanism according to the variation of supplied flow rate 0.4∼30 ㎤/s and rotating speed 200∼4000 rpm, and to investigate three kinds of breakup pattern such as drop, ligament and film formation by comparing the transition flow rate, ligament number and ligament length to those of Tanasawa and Matsumoto's empirical formula. The results are as follows ; The higher it makes use of viscous liquid, the better it get the characteristics of breakup mechanism. Also, When I compared practical value with experiential value at similar test conditions, it was shown similar tendency though were a little variation.

참고문헌 (7)

  1. "A Photographic Investigation into the Disintegration of Liquid Sheets" (1954)
  2. "Effects of Shape of Rotating Disks and Cups on Liquid Atomization", pp.~78 (1978)
  3. "On the Filamentation of Liquid by means of Rotating Discs" (1959)
  4. "Effect on Wettability of Atomizer Characterization of Spinning" (1986)
  5. "Flow Visualization and Spectral Measurements in a Simulated Rigid Disk Drive IEEE Transactions on Components" (1988)
  6. "단일회전원판을 포함하는 밀폐된 내부 유동장 특성", pp.179~184 (2001)
  7. "Laminar-to-Turbulent Transition of Three-Dimensional Boundary Layers on Rotating Bodies Transactions of ASME Journal of Fluids Engineering 1981년 조선대학교 정밀기계공학과 졸업 1985년 경희대학교 대학원 기계공학과 졸업 1992년 경희대학교 대학원 기계공학과 졸업 3~현재 경원대학교 기계자동차공학과 부교수 윤준규 1981년 조선대학교 기계공학과 졸업 1987년 경희대학교 대학원 기계공학과 졸업 2001년 명지 대학교 대학원 기계공학과 졸업 3~현재 경원대학교 기계자동차공학과 부교수"

관련 논문AI추천

이 간행물의 다른 논문 (13건)