단열을 고려한 초저온 액체질소 저장 탱크의 지지대 용접부 설계
Weldment Design of Supports for Cryogenic Storage Tank considering Insulation
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The double-walled steel vessel with powder insulation in the space between the walls is used to minimize heat transfer by radiation and conduction in cryogenic storage tank. The vacuum required the insulation is much less extreme than with high-vacuum or multilayer insulations. The solid supports are used to bear the weight of the inner container. Thermal and structural analysis of the tank have been carried out to study the effect of vacuum and weldment geometry of the internal supports. Heat flux in wall is increased with increasing of thermal conductivity of perlite. Heat flux and stress of support is not affected by weldment geometry.
Abstract
The double-walled steel vessel with powder insulation in the space between the walls is used to minimize heat transfer by radiation and conduction in cryogenic storage tank. The vacuum required the insulation is much less extreme than with high-vacuum or multilayer insulations. The solid supports are used to bear the weight of the inner container. Thermal and structural analysis of the tank have been carried out to study the effect of vacuum and weldment geometry of the internal supports. Heat flux in wall is increased with increasing of thermal conductivity of perlite. Heat flux and stress of support is not affected by weldment geometry.
참고문헌 (8)
- T.M. Flynn, "Cryogenic engineering" (2005), Marcel Dekker
- 김청균, "초저온 하중을 고려한 내부탱크 바닥판의 설계 안정성에 관한 유한요소해석", 한국가스학회지, 8(3), pp.8~15 (2004), 한국가스학회
- 김청균, "내부탱크 저장 시스템에서 9% 니켈강재 구조물의 설계 안전성에 관한 연구", 한국가스학회지, 5(4), pp.49~55 (2001), pp.49-55
- 김호연, "LNG 저장탱크의 종합 열유동 해석프로그램 개발", 한국가스학회지, 5(2), pp.52~61 (2001)
- 박병휘, "초저온액화가스 저장탱크 내에서의 액화질소의 거동", 한국가스학회지, pp.37~48 (1998)
- "Unigraphics NX4, UGS", ~
- "Ansys user manual, Ansys Inc.", ~
- "ASME Boiler & pressure vessel Sec. II, Part D, ASME, 2007", ~ (2007)