정적제빙형인 관외 제빙에 관한 연구
A Study on the Ice-on-coil as a Static Ice Making Type
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This study was experimentally investigated to understand the ice making characteristics of ice on a coil type ice maker. The experiment was carried out under the following conditions which are the brine temperatures of -10[℃], -8[℃], -6[℃], brine flow velocities of 1.0[m/s], 1.4[m/s], 1.8[m/s] and initial water temperatures of 6[℃], 9[℃], 12[℃], etc. The acquired conclusions shows; 1) Ice making amount is increased with decreasing in the temperature of brine. 2) Total ice making amount shows higher value in larger size coil. However, the ice making amount per heat transfer area is increased in smaller one. 3) The ice making amount is increased with decreasing in the initial water temperature. 4) It is cleared that the overturn of natural convection existed in this experimental result.
Abstract
This study was experimentally investigated to understand the ice making characteristics of ice on a coil type ice maker. The experiment was carried out under the following conditions which are the brine temperatures of -10[℃], -8[℃], -6[℃], brine flow velocities of 1.0[m/s], 1.4[m/s], 1.8[m/s] and initial water temperatures of 6[℃], 9[℃], 12[℃], etc. The acquired conclusions shows; 1) Ice making amount is increased with decreasing in the temperature of brine. 2) Total ice making amount shows higher value in larger size coil. However, the ice making amount per heat transfer area is increased in smaller one. 3) The ice making amount is increased with decreasing in the initial water temperature. 4) It is cleared that the overturn of natural convection existed in this experimental result.
참고문헌 (13)
- Inaba, H., "Heat Transfer Characteristics of Latent Microcapsule-Water Mixed Slurry Flowing in a Pipe with Constant Wall Heat Flux(Numerical Analysis)", Transactions of the JSME, 68(665) (2002)
- Inaba, H., "Heat Storage Characteristics of Latent Microcapsules Using Hot Air Bubbles by Direct Contact Heat Exchange", Transactions of the JSME, 66(645) (2000)
- Inaba, H., "Melting Heat Transfer Characteristics of Latent Heat Microcapsule-Water Mixed Slurry Flowing in a Pipe with Constant Wall Heat Flux(Experimental Study)", Transact of the JSME, 19(1), pp.13~22 (2002)
- Kim, M. J., "Heat Transfer Characteristics of Micro- encapsulated Phase-change-Material Slurry", Journal of the SAREK, 18(6), pp.518~526 (2006)
- Kim, M. J., "A Study on Thermo-Physical of Microencapsulated Phase Change Material Slurry", Journal of the KOSME, 28(6), pp.962~971 (2004)
- Yu, J. S., "Ice Making Characteristics on Ice-on-coil Type Ice Maker", ISMT 2007 Proceedings, pp.225~230 (2007)
- Min, J.K., "A study on real time model of transfer process in an ice-on-coil tank", Proceedings of the SAREK winter annual conference, pp.40~46 (1993)
- Lee, S.R, "Laboratory test of optimal control algorithm for ice storage system", Proceedings of the SAREK winter annual conference, pp.446~450 (2000)
- Jang, Y.K., "An experimental study on the ice making characteristics of an ice-on-coil type ice storage system", Proceedings of the SAREK summer annual conference, pp.84~88 (2002)
- 안영환, "빙축열 냉방시스템의 운전특성 및 비용 분석", 설비공학 논문집, 17(2), pp.156~164 (2005), 대한설비공학회
- 박기원, "계면활성제 첨가수용액의 제빙에 관한 기초연구", 설비공학 논문집, 13(12), pp.1175~1183 (2001), 대한설비공학회
- Seung, H., "Effects of Functional Materials Adding on Adhesion of Ice Slurry", Proceedings of the SAREK winter annual conference, pp.501~506 (2003)
- Myers, T.G, "Ice and water film growth from incoming supercooled droplets", Heat & Mass Transfer, 42, pp.2233~2242 (1999)