토션을 이용한 압출공정의 상계해석에 관한연구
A Study of the Upper Bound Analysis of Extrusion Process with Torsion
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, a extrusion process with torsion of the bottom die is investigated to improve the forming performance of conventional extrusion process. In the experiment, plasticine is used as a model material. The results of experiments are compared with the two numerical methods, the Experiment and the Finite Element Method(FEM). An attempt is made to link programs incorporating with the process variables obtained by commercial FEM software, DEFORM-3D a useful package. Numerical result is compared with experimental one. These results show that the torsional extrusion process is very useful process because this process can obtain the homogenous deformations.
Abstract
In this study, a extrusion process with torsion of the bottom die is investigated to improve the forming performance of conventional extrusion process. In the experiment, plasticine is used as a model material. The results of experiments are compared with the two numerical methods, the Experiment and the Finite Element Method(FEM). An attempt is made to link programs incorporating with the process variables obtained by commercial FEM software, DEFORM-3D a useful package. Numerical result is compared with experimental one. These results show that the torsional extrusion process is very useful process because this process can obtain the homogenous deformations.
참고문헌 (8)
- S. Alexandrov, "On the dead-zone formation and limit analysis in axially symmetric extrusion", International journal of Mechanical Sciences, 43, pp.367~379 (2001)
- G. S. Min, "Process Design in Cold Forging of the Backward and Forward Extruded part", Journal of the KSPE, 14(8), pp.57~64 (1997)
- X. Kemin, "FEM Analysis of Cylinder Twist-Compression Deformation Regularity", Journal of Materials Processing Technology, 69, pp.148~151 (1997)
- Y. H. Kim, "An Analysis of the Torsional Forming Process using the Dual Stream Function", Proceedings of the 8th Int. Con. on Metal Forming, pp.741~745 (2000)
- Y. H. Kim, "A Study on the Process Design of Non-Axisymmetric Forging Components", Journal of the KSPE, 12(10) (1995)
- L. X. Kong, "Material Properties under Drawing and Extrusion with Cyclic Torsion", Material Sciences and Engineering, A308, pp.209~215 (2001)
- Yu. N. Loginov, "Investi gations of the Process of Extrusion through a rotating die", Steel in Translation, 25(4), pp.37~42 (1995)
- S. C. An, "Elastic Analysis of Cold Extrusion Die Set with Stress Ring", Transactions of Materials Processing, 11(4), pp.355~362 (2002)