Mooring Tension and Motion Characteristics of a Floating Fish Reef with Pipe in Waves and Currents Using Numerical Model
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The mooring line tension and motion response of a floating fish reef system were analyzed using a Morison equation type numerical model. The reef structure was constructed with pipe and suspended up from the bottom with a single, high tension mooring. Input forcing parameters into the model consisted of both regular and random waves, with and without currents. Heave, surge and pitch dynamic calculations were made, along with the tension response in the mooring lines. Results were analyzed in both the time and frequency domains and where appropriate, linear transfer functions were calculated. In addition, damped and natural periods of the system were determined to examine a resonating situation.
Abstract
The mooring line tension and motion response of a floating fish reef system were analyzed using a Morison equation type numerical model. The reef structure was constructed with pipe and suspended up from the bottom with a single, high tension mooring. Input forcing parameters into the model consisted of both regular and random waves, with and without currents. Heave, surge and pitch dynamic calculations were made, along with the tension response in the mooring lines. Results were analyzed in both the time and frequency domains and where appropriate, linear transfer functions were calculated. In addition, damped and natural periods of the system were determined to examine a resonating situation.
참고문헌 (16)
- Korean Ministry of Maritime Affairs and Fisheries, "Installation of artificial reef", 1~5 (2007)
- C. G. Kim, "Monitoring of floating fish reef installed in Koje coastal waters", Ocean and Polar, 23(3), pp.305~310 (2001)
- I. Tsukrov, "Finite element modeling of net panels using consistent net elements", Ocean Eng, 30, pp.251~270 (2003)
- I. Tsukrov, "Numerical modeling of nonlinear elastic components of mooring systems", IEEE J.Oceanic Eng, 30(1), pp.37~46 (2005)
- J. DeCew, "Numerical and physical modeling of a modified gravity type cage and mooring system", IEEE J.of Ocean.Eng., 30(1), pp.47~58 (2005)
- D. W. Fredriksson, "Fish cage and mooring system dynamics using physical and numerical models with field measurements", Aqua.Eng., 27(2), pp.117~270 (2003)
- D. W. Fredriksson, "The heave response of a central spar fish cage", Transactions of the ASME,J.of Off.Mech.and Arct.Eng, 25, pp.242~248 (2003)
- D. W. Fredriksson, "Fluid dynamic drag of a central spar cage open ocean aquaculture IV", Mississippi- Alabama Sea Grant Consortium, ~ (2003)
- D. W. Fredriksson, "Moored fish cage dynamics in waves and currents", Special issue on open ocean aquaculture engineering.IEEE J.Oceanic.Eng, 30(1), pp.28~36 (2005)
- D. W. Fredriksson, "Open ocean fish cage and mooring system modeling", Fisheries Dynamics 2003,National Fisheries Research and Devlopement Institute, 109~122 (2003)
- J. R. Morison, "The forces exerted by surface waves on piles", Petroleum Transactions,American Inst.of Mining Eng, 149~157 (1950)
- N. Haritos, "Modelling the response of cable elements in an ocean environment", Fin.Elem.in Analysis and Des., 19, pp.19~32 (1992)
- Y.Goda, "Random seas and the design of maritime structures", World Scientific Publishing Company, 443~ (2000)
- M. K. Ochi, "Ocean waves: The stochastic approach" (1998), Cambridge University Press
- "Shore Protection Manual, 4th ed" (1984), US Government Printing Office