석유화학 창고 시스템 내 물류 흐름 개선을 위한 시뮬레이션 분석
Simulation Analysis for Improving the Logistics Flow in an Chemical Storage System
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this study, to improve the logistics flow of existing given chemical logistics warehouse, four logistics flow alternatives were proposed to minimize truck interference by building simulation model. The simulation model for chemical storage warehouse was built to evaluate system performance. Among the four new improved alternatives based on the basic model, the model with the same truck’s pathways and locations of facilities identified an increase in the number of interferences but a decrease in daily working hours as the number of resources in a particular facility increases. Therefore, the three groups were classified as ‘efficiency’, ‘complementary’, and ‘safety’ based on the daily working hours, and the ratio of trucks entering two types of logistics warehouse was set in consideration of future market fluctuations. For each of the six types, the optimal number of resources was selected as the number of resources in the facilities with the least number of interferences in the basic model and the evaluation measures and characteristics set in this study were compared and analyzed. As a result, the Alternative 4 model operating the underground roadway produced interference between 17.0% and 36.4% of the basic model, with 113.3% of the interior loadspace.
Abstract
In this study, to improve the logistics flow of existing given chemical logistics warehouse, four logistics flow alternatives were proposed to minimize truck interference by building simulation model. The simulation model for chemical storage warehouse was built to evaluate system performance. Among the four new improved alternatives based on the basic model, the model with the same truck’s pathways and locations of facilities identified an increase in the number of interferences but a decrease in daily working hours as the number of resources in a particular facility increases. Therefore, the three groups were classified as ‘efficiency’, ‘complementary’, and ‘safety’ based on the daily working hours, and the ratio of trucks entering two types of logistics warehouse was set in consideration of future market fluctuations. For each of the six types, the optimal number of resources was selected as the number of resources in the facilities with the least number of interferences in the basic model and the evaluation measures and characteristics set in this study were compared and analyzed. As a result, the Alternative 4 model operating the underground roadway produced interference between 17.0% and 36.4% of the basic model, with 113.3% of the interior loadspace.
참고문헌 (20)
- Altiok, T., "Simulation Modeling and Analysis with Arena", pp.2~ (2011), Elsevier
- Astarita, V., "Surrogate safety measures from traffic simulation models a comparison of different models for intersection safety evaluation", Transportation Research Procedia, 37, pp.219~226 (2019)
- 백종관, "트래픽을 고려한 창고 시스템 시뮬레이션", 한국시뮬레이션학회 논문지, 22(4), pp.119~128 (2013), 한국시뮬레이션학회
- Baek, J. -K., "A simulation for warehouse traffic using ARENA", The Korean Society of Management Consulting, 9(3), pp.95~108 (2009)
- 백종관, "시뮬레이션을 이용한 창고 내부의 운반 차량 수 결정", 정보화연구, 12(4), pp.619~627 (2015), 한국엔터프라이즈아키텍처학회
- Bernechea, E. J., "Design optimization of hazardous substance storage facilities to minimize project risk", Safety Science, 51(1), pp.49~62 (2013)
- Darbra, R. M., "Domino effect in chemical accidents: Main features and accident sequences", Journal of Hazardous Materials, 183(1-3), pp.565~573 (2010)
- de Koster, R. B. M., "Accidents happen : the influence of safety-specific transformational leadership, safety consciousness, and hazard reducing systems on warehouse accidents", Journal of Operations Management, 29(7-8), pp.753~765 (2011)
- de Lira-Flores, J. A., "A MILP approach for optimal storage vessels layout based on the quantitative risk analysis methodology", Process Safety and Environmental Protection, 120, pp.1~13 (2018)
- 구승환, "시뮬레이션을 활용한 소셜커머스의 물류시스템 개선방안 연구", 한국시뮬레이션학회 논문지, 22(3), pp.25~33 (2013), 한국시뮬레이션학회
- Halawa, F., "Introduction of a real time location system to enhance the warehouse safety and operational efficiency", International Journal of Production Economics, 224, pp.107541~ (2020)
- Harwood, D. W., "Stopping sight distance design for large trucks", Transportation Research Record, (1208), pp.36~46 (1989)
- Jung, S., "New approach to optimizing the facility siting and layout for fire and explosion scenarios", Industrial and Engineering Chemistry Research, 50(7), pp.3928~3937 (2011)
- Laruea, G. S., "Can road user delays at urban railway level crossings be reduced? Evaluation of potential treatments through traffic simulation, Case Studies on Transport Policy", ~ (2020)
- Pietersen, C. M., "Analysis of the LPG-disaster in mexico city", Journal of Hazardous Materials, 20, pp.85~107 (1988)
- Rossetti, M.D., "Simulation Modeling and ARENA", pp.1~ (2016), John Wiley and Sons
- Juthatip Suraraksa, "시뮬레이션을 활용한 국방수송물류의 민․군 통합 운영 방안 수립", 한국전자거래학회지, 24(3), pp.111~128 (2019), 한국전자거래학회[DOI]
- Vrysagotis, V., "Warehouse layout problems : types of problems and solution algorithms", Journal of Computations and Modelling, 1(1), pp.131~152 (2011)
- Xu, G., "A Construction-based approach to process plant layout using mixed-integer optimization", Industrial and Engineering Chemistry Research, 46(1), pp.351~358 (2007)
- Yener, F., "Optimal warehouse design : Literature review and case study application", Computers and Industrial Engineering, 129, pp.1~13 (2019)