주조공정 설비에 대한 실시간 모니터링을 통한 불량예측에 대한 연구
A Study on Defect Prediction through Real-time Monitoring of Die-Casting Process Equipment
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In the case of a die-casting process, defects that are difficult to confirm by visual inspection, such as shrinkage bubbles, may occur due to an error in maintaining a vacuum state. Since these casting defects are discovered during post-processing operations such as heat treatment or finishing work, they cannot be taken in advance at the casting time, which can cause a large number of defects. In this study, we propose an approach that can predict the occurrence of casting defects by defect type using machine learning technology based on casting parameter data collected from equipment in the die casting process in real time. Die-casting parameter data can basically be collected through the casting equipment controller. In order to perform classification analysis for predicting defects by defect type, labeling of casting parameters must be performed. In this study, first, the defective data set is separated by performing the primary clustering based on the total defect rate obtained during the post-processing. Second, the secondary cluster analysis is performed using the defect rate by type for the separated defect data set, and the labeling task is performed by defect type using the cluster analysis result. Finally, a classification learning model is created by collecting the entire labeled data set, and a real-time monitoring system for defect prediction using LabView and Python was implemented. When a defect is predicted, notification is performed so that the operator can cope with it, such as displaying on the monitoring screen and alarm notification.
Abstract
In the case of a die-casting process, defects that are difficult to confirm by visual inspection, such as shrinkage bubbles, may occur due to an error in maintaining a vacuum state. Since these casting defects are discovered during post-processing operations such as heat treatment or finishing work, they cannot be taken in advance at the casting time, which can cause a large number of defects. In this study, we propose an approach that can predict the occurrence of casting defects by defect type using machine learning technology based on casting parameter data collected from equipment in the die casting process in real time. Die-casting parameter data can basically be collected through the casting equipment controller. In order to perform classification analysis for predicting defects by defect type, labeling of casting parameters must be performed. In this study, first, the defective data set is separated by performing the primary clustering based on the total defect rate obtained during the post-processing. Second, the secondary cluster analysis is performed using the defect rate by type for the separated defect data set, and the labeling task is performed by defect type using the cluster analysis result. Finally, a classification learning model is created by collecting the entire labeled data set, and a real-time monitoring system for defect prediction using LabView and Python was implemented. When a defect is predicted, notification is performed so that the operator can cope with it, such as displaying on the monitoring screen and alarm notification.
참고문헌 (32)
- Abe, N, "Outlier detection by active learning", Proceedings of the 12th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, pp.504~509 (2006), ACM Press
- Aggarwal., C.C, "A Human-Computer Interactive Method for Projected Clustering", IEEE Transactions on Knowledge and Data Engineering, 16(4), pp.448~460 (2004)
- Bouveyron, C, "Model-based Clustering of High-dimensional Data: A Review", Computational Statistics & Data Analysis, 71, pp.52~78 (2014)
- Breunig, M.M, "LOF: Identifying Density-Based Local Outliers", ACM SIGMOD Record, 29(Issue 2), pp.93~104 (2000)
- Chandola, V, "Anomaly detection:A survey", ACM Computing Surveys, 41(Issue 3), pp.1~58 (2009)
- Chawla, N. V, "Editorial:special issue on learning from imbalanced data sets", SIGKDD Explorations, 6, pp.1~6 (2004)
- 최은석, "DBSCAN 기반의 제조 공정 데이터 불량 위치의 검출", 한국콘텐츠학회 논문지, 17(7), pp.182~192 (2017), 한국콘텐츠학회[DOI]
- 최수진, "서포트벡터 회귀를 이용한 실시간 제품표면거칠기 예측", 한국산업경영시스템학회지, 44(3), pp.117~124 (2021), 한국산업경영시스템학회
- 주영석, "잔여 유효 수명 예측 모형과 최소 수리 블록 교체 모형에 기반한 비용 최적 예방 정비 방법", 한국산업경영시스템학회지, 45(3), pp.18~30 (2022), 한국산업경영시스템학회
- 최낙훈, "머신러닝을 활용한 자동차 시트용 폴리우레탄 발포공정의 불량 예측 모델 개발", 한국산학기술학회논문지, 22(6), pp.36~42 (2021), 한국산학기술학회[DOI]
- Ezugwu, A. E, "A comprehensive survey of clustering algorithms:State-of-the-art machine learning applications, taxonomy, challenges, and future research prospects", Engineering Applications of Artificial Intelligence, 10 (2022)
- Ezugwu, A. E, "Automatic clustering algorithms : A systematic review and bibliometric analysis of relevant literature", Neural Computing and Applications, 33, pp.6247~6306 (2021)
- Jain, A. K, "Data clustering: 50 years beyond K-means", Pattern Recognition Letters, 31(Issue 8), pp.651~666 (2010)
- Joshi, M.V, "Mining needle in a haystack: Classifying rare classes via two-phase rule induction", Proceedings of the 2001ACM SIGMOD international conference on Management of data, pp.91~102 (2001), ACM Press
- 김준, "다이캐스팅 공정의 품질고도화를 위한 지능화 분석 시스템 개발", 한국정밀공학회지, 37(4), pp.249~254 (2020), 한국정밀공학회[DOI]
- Kittur, J.K, "Modeling of Pressure die casting process: An Artificial Intelligence Approach", International Journal of Metalcasting, 10(Issue 1), pp.70~87 (2015)
- 권세혁, "머신러닝 기법을 활용한 대용량 시계열 데이터 이상 시점탐지 방법론 : 발전기 부품신호 사례 중심", 한국산업경영시스템학회지, 43(2), pp.33~38 (2020), 한국산업경영시스템학회[DOI]
- 이종영, "미세먼지, 악취 농도 예측을 위한 앙상블 방법", 한국산업경영시스템학회지, 42(4), pp.203~210 (2019), 한국산업경영시스템학회[DOI]
- Lee, J. H, "Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting", Sensors, 18(5), pp.1428~ (2018)
- Lee, J, "Die-casting fault detection based on unsupervised deep-learning", Proceeding of KSME Annual Meeting, pp.1027~1029 (2021)
- 이승로, "고압 다이캐스팅 공정에서 제품 결함을 사전 예측하기 위한 기계 학습 기반의 공정관리 방안 연구", 한국주조공학회지, 41(6), pp.521~527 (2021), 한국주조공학회
- Lee, J. S, "Migration from the traditional to the smart factory in the die-casting industry:Novel process data acquisition and fault detection based on artificial neural network", Journal of Material Processing Technology, 290, pp.1735~ (2021)
- Mac Queen, J.E, "Some methods for classification and analysis of multivariate observations", Proceedings of the Fifth Berkley Symposium Math. Stat Prob, 1, pp.281~297 (1967)
- Mutar, Jinan Redha, "A Review of Clustering Algorithms", International Journal of Computer Science and Mobile Applications, 10(Issue. 10), pp.44~50 (2022)
- 박철순, "대형 항공부품용 5축 가공기에서의 예측정비에 관한 연구", 한국산업경영시스템학회지, 43(4), pp.161~167 (2020), 한국산업경영시스템학회[DOI]
- Phua, C, "Minority report in fraud detection: classification of skewed data", SIGKDD Explorer Newsletter, 6, pp.50~59 (2004)
- 서명교, "군집기반 열간조압연설비 상태모니터링과 진단", 품질경영학회지, 45(1), pp.25~38 (2017), 한국품질경영학회[DOI]
- Theiler, J., "Resampling approach for anomaly detection in multispectral images", Proceedings of SPIE, pp.230~240 (2003)
- Steinwart, I, "A classification framework for anomaly detection", Journal of Machine Learning Research, 6, pp.211~232 (2005)
- Triantafillakis, A, "Panagiotis Kanellis, Drakoulis Martakos, Data warehouse clustering on the web", European Journal of Operational Research, 160(2), pp.353~364 (2005)
- Ur Rehman, A, "Unsupervised outlier detection in multidimensional data", Journal of Big Data, 8, pp.80~ (2021)
- Vilalta, R, "Predicting rare events in temporal domains", Proceedings of the 2002 IEEE International Conference on Data Mining, pp.474~ (2002), IEEE Computer Society