본문 바로가기
KERD
논문KCI 등재

레진 시멘트와 상아질접착제를 사용한 콤포지트 레진 코아의 전단결합강도에 관한 연구

2

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

Purpose : The purpose of this study was aimed to compare the shear bond strength on dentin of three dentin bonding agents and two resin cements used in conjunction with self-cured composite resin core material. Material and method : Control group and six experimental groups were divided for this study. Control group was designated as specimens bonded with Tenure A&B.. Experimental groups were as follows: PB-BL group : specimens bonded with Prime&Bond NT., BondLink. SB-BL group : specimens bonded with SingleBond., BondLink. PB group : specimens bonded with Prime&Bond NT. SB group : specimens bonded with SingleBond. PF group : specimens bonded with Panavia-F. BI group : specimens bonded with BistiteⅡ. All specimens were stored in 37℃ distilled water for 24 hours, followed by the shear bond strength was tested by universal testing machine. The data was analysed statistically by Mann-Whitney test. Results : 1. For Prime&Bond NT. and SingleBond., the shear bond strength was 0.24 MPa and 7.19 MPa each by each, while Tenure A&B. group control was measured at 13.93 MPa (p<0.05). Especially for Prime&Bond NT., it did not get conjunction with dentin. 2. For Prime&Bond NT. and SingleBond. using BondLink., there was no significant difference as a result of 11.73 MPa and 14.00 MPa each by each (p<0.05). 3. For Panavia-F. and BistiteⅡ., they showed the highest shear bond strength as measured by 18.24 MPa and 16.09 MPa each(p<0.05).

참고문헌 (48)

  1. "Principles of preparingendodontically treated tooth for doweland core restoration", 30, pp.162~3
  2. "An endodonticprosthodontic approach t internal tooth reinforcement", 45, pp.164~74 (1981)
  3. "The art and science of operativedentistry", Mosby Co
  4. "Scanning electron microscopic study on resininfiltrations after dentin treatments", 18, pp.38~53
  5. "Mercury toxicityin the dental office", 92, pp.1189~1194
  6. "The silent hazard:An unusual case of mercury contaminationof a dental suite", 92, pp.1195~1198
  7. "Creep versusmarginal fracture of amalgam restorations", 13, pp.299~303 (1986)
  8. "Amalgam corrosion determined by dissolutionof component elements and microstructuralchanges", 5, pp.26~36
  9. "Long term corrosionstudies in vitro of amalgams in contact", pp.205~213
  10. "Bondingamalgam to glass ionomer with PPA", 4, pp.191~196 (1988)
  11. "One-year and two-year clinical evaluationof a composite resin vs", 30, pp.795~800 (1973)
  12. "Clinical comparison of composite,amalgam,and silicate restorations", 89, pp.1111~1117
  13. "Placement andlongevity of amalgam restorations inDenmark", 48, pp.297~ (1990)
  14. "Analysis of long-termclinical behavior of class-Ⅱ amalgamrestorations", 49, pp.47~ (1991)
  15. "Athree year clinical evaluation of compositeresin and a high copper amalgam in posteriorprimary teeth", 47, pp.414~
  16. "Composite versus amalgam restorations", 13, pp.401~ (1986)
  17. "The use of composites as corematerial in root-filled teeth", 7, pp.205~14
  18. "The compositeresin post and core", 28, pp.500~503
  19. "Dimensional stabilityof composites used as a core material", 56, pp.554~561 (1986)
  20. "The compositeresin crown and core", 33, pp.642~648
  21. "Direct esthetic restorative materials", 10, pp.244~280 (1997)
  22. "The penetration of micro-organismbetween the tooth and direct resinfillings", 51, pp.560~566 (1955)
  23. "Skinner’s Science of DentalMaterials"
  24. "Microleakage of new dentinbonding systems using human and bovineteeth", 20, pp.230~235 (1995)
  25. "Bond strength and microleakagewith dentin bond systems", 15, pp.53~60 (1990)
  26. "Hydrostatic intrapulpal pressure and bondstength of bonding systems", 7, pp.54~58
  27. "Permeability of normal versus cariousdentin", 7, pp.207~211 (1991)
  28. "bondstrength of dentin adhesive", pp.229~233
  29. "Bond stength ofdentinal adhesives in primary teeth", 24, pp.271~273 (1993)
  30. "Dentin bonding system", 6(1), pp.15~31 (1996)
  31. "Fifth generation bondingsystems", 63(6), pp.439~443 (1997)
  32. "Dentin bonding in perspective", 1, pp.173~175 (1988)
  33. "Shear bondstrength of an autopolymerizing core buildup composite bonded to dentin with 9dentin adhesive systems", 86(6), pp.620~3 (2001)
  34. "Adhesion ofresin composite core materials to dentin", 14, pp.451~456 (2001)
  35. "Effectsof intracore material interlocks and cementtype on full crown retention", 4, pp.29~32
  36. "Theinorganic components of cementum andenamel related dentin in the rat incisor", 69, pp.1287~1292 (1990)
  37. "The morphologic relationshipbetween dental resins and etched dentin", 56, pp.1155~1160 (1977)
  38. "Dentinpermeability:effects of smear layer removal", 46, pp.531~537 (1981)
  39. "Principle of adhesion", 5, pp.1~9 (1992)
  40. "Surface interaction of dentinadhesive materials", 5, pp.81~94
  41. "Effect of hydrostaticpressure on the diffusion of monomersthrough dentin in vitro", 74, pp.369~373 (1995)
  42. "Hybrid layer as a Dentin-Bonding Mechanism", 123, pp.35~43 (1991)
  43. "Improving bond strengththrough acid etching of dentin and bond-ing to wet dentin surfaces", 123, pp.35~43 (1992)
  44. "The promotion of adhesionby the infiltration of monomers into toothsubstrates", 16, pp.265~273 (1982)
  45. "Core buildup& adhesive incompatibility", 24, pp.1~2 (2000)
  46. "Caries penetration and cement thicknessof three luting agents", 1, pp.259~263
  47. "A review of dentalcements used for permanent retentionof restoration Part 2:Properties and criteriafor selscion", 56, pp.218~ (1974)
  48. "Marginalleakage of cast crowns luted with anadhesive resin cement", 67, pp.11~15

관련 논문AI추천

이 간행물의 다른 논문 (9건)