본문 바로가기
KERD
논문KCI 등재

유지형태에 따른 가변형 치과 인상용 트레이의 유지력에 관한 연구

RETENTIVE FORCE OF ADJUSTABLE DENTAL IMPRESSION TRAYS WITH DIFFERENT RETENTION FORMS

김유리|김성록|박광수|동진근|송기범
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2005.02|대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)|제43권 제1호|pp. 15-29

1

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

Statement of problem. The adjustable dental impression trays were made for being adjusted their width automatically along the width of dental arch. Purpose. The purpose of this study was to investigate the best retentive form of adjustable dental impression tray, and so to make it a more satisfactory product. Material and methods. The eight pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) with different distribution of holes and with or without the rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray, and the tray jig which was made for holding the tray on a lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum retentive force by use of a UTM at a constant strain rate of 100mm per minute. A 2-factor analysis of variance (p<.05) was used to determine whether differences existed among distribution of retentive holes and between rim existing and not. Results. 1. The retentive force of the upper and lower resin tray with 2mm holes on the tray border was highest(25.83/24.98kg).(p<.05) 2. As the tray had more retentive holes, it was less retentive. 3. There was no significant difference in the retentive force of the varied hole intervals in the case of distributing all the area.(p>.05) 4. The rimless trays were more retentive generally, than the rimmed trays except 2 case: upper tray group-all area / 2 mm. intervals and lower tray group-margin only / 2 mm. intervals.(p<.05) 5. Most of the adjustable trays were showed higher retentive force than perforated metal tray except the lower group that perforated on the all area at intervals of 2 mm.

참고문헌 (33)

  1. "Boucher’s Prosthetic Treatment for Edentulous Patients", pp.150~151 (1990), CV Mosby Co
  2. "Factors that affect the accuracy and dimensional stability of the mercaptan rubber-base impressionmaterials", 10, pp.525~535 (1960)
  3. "The accuracy of stone dies made from rubber impression materials", 24, pp.377~386 (1970)
  4. "Evaluation of the methods for dislodging the impression tray affecting the dimensionalaccuracy of the abutments in a complete dental arch cast", 61, pp.54~58 (1989)
  5. "The influence of impression trays on the accuracy of stone casts poured from irreversible hydrocolloid impressions", 54, pp.383~388 (1985)
  6. "A study on the fitness of stock tray in Korean adults", 27, pp.131~140 (1989)
  7. "Development of dentulous stock trays for Koreans", pp.755~778 (1996)
  8. "A study on the fitness of dentulous stock tray designed for Korean Journal of WonkwangDental Research Institute 1997", 7, pp.193~209 (1997)
  9. "Development of adjustable dental impression trays 10th Meeting of the International College ofProsthodontists" (2003)
  10. "Alginate Impression Materials", 32, pp.985~986 (1945)
  11. "Some notes on alginate impression material", 3, pp.184~185 (1958)
  12. "The bonding of alginate impression materials to impression trays", 115, pp.291~294 (1963)
  13. "Skinner’s science of dental materials", pp.149~156 (1982)
  14. "The design of stock trays and the retention of irreversible hydrocolloid impressions", 21, pp.136~142 (1969)
  15. "Elasticity of impression materials:IV Permanent deformation as a function of time", 54, pp.168~173 (1975)
  16. "Compatibility of alginate impression materials and dental stones", 25, pp.556~566 (1971)
  17. "A study on the accuracy of rubber impression materials", 21, pp.237~243 (1983)
  18. "Alginate impression materials", 13, pp.27~32 (1986)
  19. "Making a custom tray for elastomeric impression materials without a primary cast", 72, pp.569~571 (1994)
  20. "Custom impressiontrays with a new hypoallergenic material", 72, pp.572~573 (1994)
  21. "The impression tray - an importantfactor in impression precision", 27, pp.146~153 (1977)
  22. "Custom impression trays:part I- Mechanical properties", 71, pp.31~34 (1994)
  23. "Influence of tray design upon elastic impression materials", 23, pp.51~57 (1970)
  24. "Elastic impression materials", 15, pp.81~98 (1971)
  25. "Distortion analysis of stone casts made from impression materials", 54, pp.794~802 (1985)
  26. "Dimensional stability of rubber base impressions and certain other factors affecting accuracy", 57, pp.39~48 (1958)
  27. "The accuracy of highly filled elastomeric impression materials", 33, pp.67~72 (1975)
  28. "The influence of impression trays on the accuracy of the stone casts poured from completearchimpressions", 30, pp.1~13 (1992)
  29. "Factors that affect the adhesion of two irreversible hydrocolloid materials to twocustom tray materials", 88, pp.423~430 (2002)
  30. "The relative effectiveness of adhesives for polysulphide impression materials", 120, pp.135~138 (1966)
  31. "Adhesive properties of several impression material systems:part I", 66, pp.201~209 (1991)
  32. "Efficacy of tray adhesives for the adhesion of elastomer rubber impression materials to impression modeling plastics for border molding", 79, pp.140~144 (1998)
  33. "Retentive force of dental impression tray according to retention form", 20, pp.43~50 (2004)

이 간행물의 다른 논문 (9건)

수종의 레진 시멘트의 용해도와 수분흡착에 관한 연구조인호, 황유진, 임헌송, 임주환pp. 1-14IPS Empress 도재관의 파절강도:상악 견치에서 절단연 삭제량과 축면 경사도에 따른 영향강한중, 박용석, 박광수, 동진근, 신동국pp. 30-40한국 성인 유치악자의 교합평면 및 수직고경에 관한 연구박정형, 전영찬, 정창모, 임장섭pp. 41-51의치상용 자가중합레진의 중합조건에 따른 파괴인성김지혜, 송광엽, 박주미, 양병덕, 정수양pp. 52-60임플랜트 지지 보철물에서 고정체의 식립위치와 각도에 따른 삼차원 유한요소법적 응력분석에 관한 연구박원희, 이영수pp. 61-77
원문 보기