치아 마모 환자에서 수직고경 증가를 동반하여 단일구조 지르코니아 보철물로 완전구강회복을 시행한 증례
Full mouth rehabilitation of the patient with worn dentition using full-contoured zirconia prostheses at an increased vertical dimension of occlusion: a case report
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
과도한 치아 마모는 교합면에 손상을 야기하고, 치수 병변, 교합 부조화, 기능장애, 심미적 문제 등을 야기할 수 있다. 과도한 치아 마모를 갖고 있는 환자들을 치료하고자 할 때 수직교합고경(vertical dimension of occlusion, VDO)의 상실 여부와 수복을 위한 악간 공간의 적절성 여부에 기반하여 분류를 할 필요가 있다. 본 증례의 환자는 다수 치아들의 마모를 지닌 50세의 남성으로, 과도한 치아 마모가 있지만 수직교합고경의 상실은 없으며 수복을 위한 악간 공간이 부족하였다. 이러한 경우 수직교합고경을 증가시켜 치료를 진행하는 것을 고려할 수 있다. 수직교합고경의 증가를 필요한 범위 내에서 최소로 줄이고, 증가된 수직교합고경 상에서 안정화 기간을 거친 뒤 안정된 교합 접촉을 제공할 수 있다면, 수직고경 증가를 동반한 치료법은 안정성을 가질 수 있다. 본 남성 환자를 치료하기 위해 수직고경의 증가를 동반하여 전치부와 구치부에서 단일 구조 지르코니아를 이용한 고정성 보철물로 수복을 하였다. 일련의 치료과정을 통하여 기능적인 면과 심미적인 면에서 만족스러운 결과를 얻었기에 보고하는 바이다.
Abstract
Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.
참고문헌 (17)
- Dawson PE, "Functional occlusion : from TMJ to smile design", pp.430~452 (2007), Mosby
- Turner KA, "Restoration of the extremely worn dentition", J Prosthet Dent, 52, pp.467~474 (1984)
- Murphy T, "Compensatory mechanisms in facial height adjustment to functional tooth attrition", Aust Dent J, 4, pp.312~323 (1959)
- Murphy TR, "The progressive reduction of tooth cusps as it occurs in natural attrition", Dent Pract Dent Rec, 19, pp.8~14 (1968)
- Hemmings KW, "Partial dentures for patients with advanced tooth wear", Dent Update, 22, pp.52~59 (1995)
- Dahl BL, "The face height in adult dentate humans. A discussion of physiological and prosthodontic principles illustrated through a case report", J Oral Rehabil, 22, pp.565~569 (1995)
- Dahl BL, "Long-term observations of an increased occlusal face height obtained by a combined orthodontic", prosthetic approach, 1985, pp.12, 173~176
- Sato S, "Removable occlusal overlay splint in the management of tooth wear: a clinical report", J Prosthet Dent, 83, pp.392~395 (2000)
- Bloom DR, "Increasing occlusal vertical dimension- why, when and how", Br Dent J, 200, pp.251~256 (2006)
- Ramfjord SP, "Reflections on the Michigan occlusal splint", J Oral Rehabil, 21, pp.491~500 (1994)
- Hoyle DE, "Fabrication of a customized anterior guide table", J Prosthet Dent, 48, pp.490~491 (1982)
- Smith BH, "Changes in occlusal face height with removable partial prostheses", J Prosthet Dent, 34, pp.278~285 (1975)
- Griffiths MJ, "Telemetry and the study of vertical jaw relations", J Dent, 3, pp.261~266 (1975)
- Rivera-Morales WC, "Relationship of occlusal vertical dimension to the health of the masticatory system", J Prosthet Dent, 65, pp.547~553 (1991)
- Palmer DS, "Wear of human enamel against a commercial castable ceramic restorative material", J Prosthet Dent, 65, pp.192~195 (1991)
- Oh WS, "Factors affecting enamel and ceramic wear: a literature review", J Prosthet Dent, 87, pp.451~459 (2002)
- Albashaireh ZS, "Two-body wear of different ceramic materials opposed to zirconia ceramic", J Prosthet Dent, 104, pp.105~113 (2010)