Nd:YVO4 레이저 조사에 따른 티타늄의 표면특성 평가: 예비 연구
Evaluation of titanium surface properties by Nd: YVO4 laser irradiation: pilot study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
연구 목적: 본 연구는 서로 다른 세가지 블라스팅 처리를 한 티타늄 디스크에Nd:YVO4 레이저 조사 조건을 달리한 후 조사하여 티타늄의 표면 거칠기 및 표면 변화를 관찰하기 위함이다. 연구 재료 및 방법: 디스크 형태의 상용 순수 티타늄 시편을 30개 준비하여 시료 표면을 각각 10개씩 ZrO2 (zirconium dioxide), Al2O3 (aluminium oxide), RBM (resorbable blasted media) 으로 블라스팅(blasting)하고 초음파 세척하였다. Nd:YVO4 레이저(Laser Pro D-20, Laserval Korea(R), Seoul, South Korea)에서 주사속도(100, 300, 500 mm/s)와 시간당 진동량(반복률) (5, 15, 35 kHz)을 다르게 하여 9가지 조건을 설정하였다. 레이저 조사 후 주사전자현미경, X-선 회절 분석 및 에너지 분산X선 분광분석, 표면 거칠기 분석을 통해 각 시편을 평가하고 분석하였다. 결과: 주사전자현미경의 결과 레이저 조사를 시행하지 않은 티타늄 표면은 방향성이 없는 불규칙한 형상을 보였고 레이저 조사를 처리한 시편은 특징적인 형태가 관찰되었다. X-선회절분석결과ZrO2, RBM 의 고유피크는 관찰되지 않았으나 Al2O3분사한 군에서는 알루미나의 고유 피크가 관찰되었다. 에너지 분산X선 분광분석을 통해 관찰한 티타늄의 산화도 경향성과 표면 거칠기는 유사하였다. 표면 거칠기는 주사속도와 반복률에 따른 차이를 보였다(P<.05). 결론: 레이저 조사 조건에 따라 티타늄 디스크의 미세구조와 표면 거칠기가 변화되었다. 레이저 조사는 골유착을 증진시키기 위한 임플란트 표면을 변화시키는 방법중의 하나로 여길 수 있을 것이다.
Abstract
Purpose: This study was conducted to evaluate the roughness and surface alternations of three differently blasted titanium discs treated by Nd: YVO4 Laser irradiation in different conditions. Materials and methods: Thirty commercially pure titanium discs were prepared and divided into three groups. Each group was consisted of 10 samples and blasted by ZrO2 (zirconium dioxide), Al2O3 (aluminum oxide), and RBM (resorbable blasted media). All the samples were degreased by ultrasonic cleaner afterward. Nine different conditions were established by changing scanning speed (100, 300, 500 mm/s) and repetition rate (5, 15, 35 kHz) of Nd: YVO4 Laser (Laser Pro D-20, Laserval Korea(R), Seoul, South Korea). After laser irradiation, a scanning electron microscope, X-ray diffraction analysis, energy dispersive X-ray spectroscopic analysis, and surface roughness analysis were used to assess the roughness and surface alternations of the samples. Results: According to a scanning electron microscope (SEM), titanium discs treated with laser irradiation showed characteristic patterns in contrast to the control which showed irregular patterns. According to the X-ray diffraction analysis, only Al2O3 group showed its own peak. The oxidation tendency and surface roughness of titanium were similar to the control in the energy dispersive X-ray spectroscopic analysis. The surface roughness was inversely proportional to the scanning speed, whereas proportional to the repetition rate of Nd: YVO4. Conclusion: The surface microstructures and roughness of the test discs were modified by the radiation of Nd: YVO4 laser. Therefore, laser irradiation could be considered one of the methods to modify implant surfaces for the enhancement of osseointegration.
참고문헌 (23)
- Albrektsson T, "Osseointegration: current state of the art", Dent Clin North Am, 33, pp.537~554 (1989)
- Wennerberg A, "Effects of titanium surface topography on bone integration: a systematic review", Clin Oral Implants Res, 20, pp.172~184 (2009)
- Mendonça G, "Advancing dental implant surface technology-from micron- to nanotopography", Biomaterials, 29, pp.3822~3835 (2008)
- Marchi J, "Cell proliferation of human fibroblasts on alumina and hydroxyapatite- based ceramics with different surface treatments", Int J Appl Ceram Technol, 7, pp.139~147 (2010)
- Le Gue′hennec L, "Surface treatments of titanium dental implants for rapid osseointegration", Dent Mater, 23, pp.844~854 (2007)
- Elias CN, "Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque", J Mech Behav Biomed Mater, 1, pp.234~242 (2008)
- Wennerberg A, "A histomorphometric and removal torque study of screw-shaped titanium implants with three different surface topographies", Clin Oral Implants Res, 6, pp.24~30 (1995)
- Vasanthan A, "Implant surface modification using laser guided coatings: in vitro comparison of mechanical properties", J Prosthodont, 17, pp.357~364 (2008)
- Romanos GE, "Effects of diode and Nd:YAG laser irradiation on titanium discs: a scanning electron microscope examination", J Periodontol, 71, pp.810~815 (2000)
- Stubinger S, "Surface alterations of polished and sandblasted and acid-etched titanium implants after Er:YAG, carbon dioxide, and diode laser irradiation", Int J Oral Maxillofac Implants, 25, pp.104~111 (2010)
- Bereznai M, "Surface modifications induced by ns and sub-ps excimer laser pulses on titanium implant material", Biomaterials, 24, pp.4197~4203 (2003)
- Heinrich A, "Laser-modified titanium implants for improved cell adhesion", Lasers Med Sci, 23, pp.55~58 (2008)
- Braga Francisco JC, "Surface modification of Ti dental implants by Nd:YVO4 laser irradiation", Appl Surf Sci, 253, pp.9203~9208 (2007)
- Taira T, "Single-mode oscillation of laser-diode-pumped Nd:YVO4 microchip lasers", Opt Lett, 16, pp.1955~1957 (1991)
- Block CM, "Effects of the Nd:YAG dental laser on plasma-sprayed and hydroxyapatite-coated titanium dental implants: surface alteration and attempted sterilization", Int J Oral Maxillofac Implants, 7, pp.441~449 (1992)
- Fields RA, "Highly efficient Nd:YVO4 diode-laser end-pumped laser", Appl Phys Lett, 51 (1885)
- Johansson CB, "A removal torque and histomorphometric study of commercially pure niobium and titanium implants in rabbit bone", Clin Oral Implants Res, 2, pp.24~29 (1991)
- Gottlander M, "Histomorphometric analyses of hydroxyapatite- coated and uncoated titanium implants. The importance of the implant design", Clin Oral Implants Res, 3, pp.71~76 (1992)
- Cooper LF, "A role for surface topography in creating and maintaining bone at titanium endosseous implants", J Prosthet Dent, 84, pp.522~534 (2000)
- Rnold HJ, "Analysing the optimal value for titanium implant roughness in bone attachment using a tensile test", Biomaterials, 24, pp.4559~4564 (2003)
- Kreisler M, "Effect of Nd:YAG, Ho:YAG, Er:YAG, CO2, and GaAIAs laser irradiation on surface properties of endosseous dental implants", Int J Oral Maxillofac Implants, 17, pp.202~211 (2002)
- Chu RT, "Temperature rise and surface modification of lased titanium cylinders", J Dent Res, 71, pp.144~ (1992)
- Peto¨ G, "Surface treatment of screw shaped titanium dental implants by high intensity laser pulses", Appl Surf Sci, 186, pp.7~13 (2002)