4종 임플란트 나사산 디자인의 응력분산 특성에 대한 3차원 유한요소해석 연구
Stress dissipation characteristics of four implant thread designs evaluated by 3D finite element modeling
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
오늘날 치과 분야에서 CAD/CAM (computer-aided design/computer-aided manufacturing)은 인레이나 크라운, 임플란트 등에 광범위하게 사용되고 있으며 총의치로도 그 영역을 넓히고 있다. CAD/CAM을 이용하여 총의치 제작 시 환자의 chair time과 방문 횟수를 줄일 수 있고 이로 인해 총 제작기간의 단축과 비용절감을 노릴 수 있으며 기공과정의 오차 감소를 기대할 수 있다. 최근 CAD/CAM을 이용한 여러 시스템 중 DENTCATM CAD/CAM denture (DENTCA Inc. Los Angeles, USA)는 무치악 인상체를 스캔한 후 디지털 상에서 의치를 디자인한 뒤 3D 프린팅을 사용하여 시적의치를 제작해 이를 최종의치로 변환하는 기술을 이용하고 있다. 이로 인해 최적의 경우 2~3번의 내원으로 의치 장착이 가능하며 정확한 의치적합도를 기대할 수 있다. 본 증례의 환자는 71세 남자로, 기존 의치를 장기간 착용하여 재제작 상담을 위해 내원하였으며 예후가 불량한 잔존 치아와 치근을 발거하고 기존 하악의치를 수정하여 2달 간 사용한 뒤, 치료를 시작하였다. DENTCA에서 제공하는 알맞은 크기의 기성 트레이를 선택하여 one-step border molding을 시행한 후, wash impression을 채득하였다. 기존의치의 수직고경을 바탕으로 고딕 아치 트레이싱을 시행한 후 결정된 중심위로 상하악 트레이를 고정하고 교합인기를 시행하였다. DENTCA에서 이를 스캔하여 인공치 배열 및 festooning을 시행하고 3D 프린팅을 이용해 시적의치를 제작하였다. 환자 구강 내에 시적하고 교합평면 및 교합관계를 평가한 뒤 다시 교합인기를 시행하였으며, 이를 바탕으로 최종의치로 변환하였다. 양측성 균형교합을 형성하기 위해 안궁 이전을 이용하여 임상적 재부착 후 교합조정을 시행하였으며 이로 인해 양호한 결과를 얻었기에 보고하는 바이다.
Abstract
Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCATM CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.
참고문헌 (31)
- Albrektsson T, "Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man", Acta Orthop Scand, 52, pp.155~170 (1981)
- Friberg B, "Early failures in 4,641 consecutively placed Brånemark dental implants: a study from stage 1surgery to the connection of completed prostheses", Int J Oral Maxillofac Implants, 6, pp.142~146 (1991)
- Javed F, "Role of primary stability for successful osseointegration of dental implants:Factors of influence and evaluation", Interv Med Appl Sci, 5, pp.162~167 (2013)
- 김성회, "임플란트의 생존율에 영향을 미치는 국소적 인자에 대한 19년간의 후향적 연구", 대한치과보철학회지, 48(01), pp.28~40 (2010), 대한치과보철학회
- Meredith N, "Assessment of implant stability as a prognostic determinant", Int J Prosthodont, 11, pp.491~501 (1998)
- Misch CE, "Dental implant prosthetics", Mosby, pp.322~347 (2005)
- Chun HJ, "Evaluation of design parameters of osseointegrated dental implants using finite element analysis", J Oral Rehabil, 29, pp.565~574 (2002)
- Kong L, "Evaluation of the cylinder implant thread height and width: a 3-dimensional finite element analysis", Int J Oral Maxillofac Implants, 23, pp.65~74 (2008)
- 서영훈, "임플랜트 나사선 경사각이 치조골 응력 분포에 미치는 영향", 대한치과보철학회지, 45(4), pp.482~491 (2007), 대한치과보철학회
- Hansson S, "The implant thread as a retention element in cortical bone: the effect of thread size and thread profile: a finite element study", J Biomech, 36, pp.1247~1258 (2003)
- Geng JP, "Finite element analysis of four thread-form configurations in a stepped screw implant", J Oral Rehabil, 31, pp.233~239 (2004)
- Esposito M, "Histopathologic observations on early oral implant failures", Int J Oral Maxillofac Implants, 14, pp.798~810 (1999)
- Raghavendra S, "Early wound healing around endosseous implants: a review of the literature", Int J Oral Maxillofac Implants, 20, pp.425~431 (2005)
- 유원재, "유한요소 모사해석을 통한 임플란트 나사산 형상이 치밀골의 식립응력에 미치는 영향 분석", 대한치과보철학회지, 52(4), pp.279~286 (2014), 대한치과보철학회[DOI]
- Schwitalla AD, "Finite element analysis of the biomechanical effects of PEEK dental implants on the peri-implant bone", J Biomech, 48, pp.1~7 (2015)
- Van Oosterwyck H, "The influence of bone mechanical properties and implant fixation upon bone loading around oral implants", Clin Oral Implants Res, 9, pp.407~418 (1998)
- Sevimay M, "Threedimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown", J Prosthet Dent, 93, pp.227~234 (2005)
- Papavasiliou G, "3DFEA of osseointegration percentages and patterns on implant-bone interfacial stresses", J Dent, 25, pp.485~491 (1997)
- Huang HL, "Bone stress and interfacial sliding analysis of implant designs on an immediately loaded maxillary implant : a non-linear finite element study", J Dent, 36, pp.409~417 (2008)
- Mellal A, "Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data", Clin Oral Implants Res, 15, pp.239~248 (2004)
- Rubin PJ, "Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component", J Biomech, 26, pp.725~739 (1993)
- Albrektsson T, "Clinical periodontology and implant dentistry", pp.809~820 (2003), Blackwell Munksgaard
- Davies JE, "Mechanisms of endosseous integration", Int J Prosthodont, 11, pp.391~401 (1998)
- Viceconti M, "Large-sliding contact elements accurately predict levels of boneimplant micromotion relevant to osseointegration", J Biomech, 33, pp.1611~1618 (2000)
- Wehner T, "Improvement of the shear fixation stability of intramedullary nailing", Clin Biomech(Bristol, Avon), 26, pp.147~151 (2011)
- Bardyn T, "Prediction of dental implant torque with a fast and automatic finite element analysis: a pilot study", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 109, pp.594~603 (2010)
- Lin D, "Evaluation of dental implant induced bone remodelling by using a 2D finite element model", Proceedings of the 5th Australasian Congress on Applied Mechanics (ACAM 2007), pp.301~306 (2007)
- Atieh MA, "Evaluation of optimal taper of immediately loaded wide-diameter implants: a finite element analysis", J Oral Implantol, 39, pp.123~132 (2013)
- Frost HM, "Bone's mechanostat: a 2003 update", Anat Rec A Discov Mol Cell Evol Biol, 275, pp.1081~1101 (2003)
- Geng JP, "Finite element analysis of four thread-form configurations in a stepped screw implant", J Oral Rehabil, 31, pp.233~239 (2004)
- Kong L, "Comparative study of 12 thread shapes of dental implant designs:a three-dimensional finite element analysis", World J Model Simul, 2, pp.134~140 (2006)