적절한 전방 유도 재현을 위해 수정된 Dahl 원리 및 CAD/CAM 복제 기법을 이용하여 전치부의 기능 및 심미성을 개선한 보철 수복 증례
Functional and esthetic improvement through reconstruction of anterior guidance using the modified Dahl principle and copy-milled technique of CAD/CAM system: A case report
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
상악 전치부와 같은 기능 및 심미성의 개선이 조화롭게 요구되는 부위의 치료 시에는 다른 부위보다 더 많은 지식과 기술을 필요로 한다. 특히 전방 유도(anterior guidance)를 결정하는 상악 전치부 설면 외형을 제대로 형성하지 못하면, 기능적인 불편감과 함께 전체 치열의 불안정성을 야기한다. 적절한 원리를 이용하여 전방유도를 설정한 후 임시 수복물 제작 및 조정을 통해 조화로운 전방 유도를 확보했다면 임시 수복물의 설면 외형을 최종 보철물로 정확하게 재현하는 방법에 대해 주의 깊게 고려해야 할 필요가 있다. 본 증례에서는 체계적인 진단 및 치료를 위하여 수정된 Dahl 원리(modified Dahl principle) 및 computer-aided design/computer-aided manufacturing (CAD/CAM) 시스템의 복제 기법(copy-milled)을 이용하여 적절한 전방 유도를 설정하고, 지대치의 디지털 이미지와 임시 수복물의 디지털 이미지를 중첩시켜 보다 정확하게 보철물 형태를 재현하고자 하였다. 이에 기능적, 심미적 개선을 도모하여 환자와 술자 모두에게 만족스러운 치료결과 및 예후를 얻었기에 보고하는 바이다.
Abstract
The anterior guidance is one of the important factors in prosthodontic treatment of anterior teeth. The lingual surface shape of anterior restorations is so critical that small errors of treatment procedure can cause discomfort of the patient and disharmony of the dentition. If the anterior restorations are achieved harmonious anterior guidance through the fabrication and adjustment of provisional restorations, it is important to accurately reproduce the lingual surface shape of provisional restorations as the final prosthesis. In this case report, it was used the modified Dahl principle and copy-milled technique of computer-aided design/computer-aided manufacturing (CAD/CAM) system for systematic diagnosis and treatment. Therefore, we tried to reconstruct the restoration shape more precisely by setting the appropriate anterior guidance and superimposing the digital image of the abutment teeth and the provisional restorations. Thus, by promoting functional and esthetic recovery, this case report demonstrates satisfying results to both the patients and dentist.
참고문헌 (30)
- Johansson A, "Rehabilitation of the worn dentition", J Oral Rehabil, 35, pp.548~566 (2008)
- Dawson PE, "Determining the determinants of occlusion", Int J Periodontics Restorative Dent, 3, pp.8~21 (1983)
- Berry DC, "Attrition : possible mechanisms of compensation", J Oral Rehabil, 3, pp.201~206 (1976)
- Briggs P, "Fixed prostheses in the treatment of tooth wear", Eur J Prosthodont Restor Dent, 5, pp.175~180 (1997)
- Schuyler CH, "The function and importance of incisal guidance in oral rehabilitation. 1963", J Prosthet Dent, 86, pp.219~232 (2001)
- Magne P, "Adhesive restorations, centric relation, and the Dahl principle : minimally invasive approaches to localized anterior tooth erosion", Eur J Esthet Dent, 2, pp.260~273 (2007)
- Tunkiwala A, "Conservative, functional, and esthetic rehabilitation of severe palatal erosion(Class IV)using modified dahl approach", Compend Contin Educ Dent, 38, pp.289~294 (2017)
- Dawson PE, "Evaluation, diagnosis, and treatment of occlusal problems", pp.177~178 (1974), CV Mosby Co
- Fox CW, "Principles of anterior guidance : development and clinical applications", J Craniomandibular Pract, 2, pp.23~30 (1983)
- Sabek M, "Alternative procedure for reconstructing anterior guidance using an autopolymerizing resin pattern", J Prosthet Dent, 76, pp.550~553 (1996)
- Duret F, "CAD", CAM imaging in dentistry, 1991, pp.1, 150~154
- Miyazaki T, "A review of dental CAD", CAM : current status and future perspectives from 20 years of experience, 2009, pp.28, 44~56
- Rani S, "Esthetic rehabilitation of anterior teeth with copy-milled restorations : A report of two cases", Case Rep Dent, 2017, pp.2841398~ (2017)
- 배지철, "CAD", CAM의 복제 기법을 이용한 전방 유도의 재현 증례, 2014, pp.52(2), 121~127[DOI]
- 고창우, "비심미적인 상악 전치부 환자에서 이중 스캔을 이용한 심미보철 수복 증례", 대한치과보철학회지, 56(2), pp.166~172 (2018), 대한치과보철학회[DOI]
- 이상훈, "전치부 개방교합을 보이는 법랑질형성부전증 환자의 CAD", CAM system을 이용한 전악 수복 증례, 2017, pp.55(4), 410~418[DOI]
- 신세준, "전치부의 심미 수복을 위하여 Digital Smile Design을 적용한 증례", 대한치과보철학회지, 55(2), pp.164~170 (2017), 대한치과보철학회[DOI]
- Turner KA, "Restoration of the extremely worn dentition", J Prosthet Dent, 52, pp.467~474 (1984)
- Thornton LJ, "Anterior guidance: group function", canine guidance. A literature review, 1990, pp.64, 479~482
- Dahl BL, "An alternative treatment in cases with advanced localized attrition", J Oral Rehabil, 2, pp.209~214 (1975)
- Dahl BL, "The effect of a partial bite raising splint on the occlusal face height. An x-ray cephalometric study in human adults", Acta Odontol Scand, 40, pp.17~24 (1982)
- Nemcovsky CE, "Transferring provisional restorations to final master casts", J Oral Rehabil, 21, pp.157~163 (1994)
- Beuer F, "Digital dentistry : an overview of recent developments for CAD", CAM generated restorations, 2008, pp.204, 505~511
- Smith R, "Creating well-fitting restorations with a digital impression system", Compend Contin Educ Dent, 31, pp.640~644 (2010)
- Ender A, "Full arch scans: conventional versus digital impressions-an in-vitro study", Int J Comput Dent, 14, pp.11~21 (2011)
- Chevalier J, "What future for zirconia as a biomaterial?", Biomaterials, 27, pp.535~543 (2006)
- Mitov G, "Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures", Dent Mater, 28, pp.909~918 (2012)
- Suarez MJ, "A randomized clinical trial comparing zirconia and metalceramic three-unit posterior fixed partial dentures: A 5-year follow-up", J Prosthodont (2018)
- Araujo NS, "Survival of all-ceramic restorations after a minimum follow-up of five years : A systematic review", Quintessence Int, 47, pp.395~405 (2016)
- McIntyre F, "Restoring esthetics and anterior guidance in worn anterior teeth. A conservative multidisciplinary approach", J Am Dent Assoc, 131, pp.1279~1283 (2000)