Ceramill full denture system을 이용한 무치악 환자의 양악 총의치 제작
Rehabilitation of fully edentulous patient using Ceramill full denture system (FDS)
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
CAD/CAM 기술은 이미 치과 보철학 영역에서 전반적으로 사용되고 있으며, 1994년 총의치 제작을 위한 CAD/CAM 기술이 처음 소개된 이후 의치 제작과정의 CAD/CAM 적용범위가 증가되고 있는 추세이다. 본 논문에서는 무치악 환자의 양악 총의치 제작을 위한 전통적인 다섯 단계 중 납의치 제작과정에 CAD/CAM기술을 도입하였다. 최종 인상채득하여 악간 관계를 기록한 주모형을 스캔한 후 Amann Girrbach사의 Ceramill full denture system(fds)을 이용해 납의치를 제작하였다. Ceramill fds는 스캔된 상하악 모형에 전용 소프트웨어를 이용해 인공치 배열 및 의치상을 제작하여 이를 밀링하는 방식으로 기존의 기공과정을 디지털로 전환하는 특징을 가진다. 이를 통해 총의치 제작시간의 단축 및 심미적, 기능적으로 만족스러운 의치제작이 가능했기에 본 증례를 보고하고자 하는 바이다.
Abstract
CAD/CAM technology has already been used in most areas of prosthetics. The range of CAD/CAM application in denture fabricating process has been gradually increasing since the CAD/CAM technology was introduced for the fabrication of complete dentures in 1994. This paper describes a technique that combines conventional and CAD/CAM technology for the fabrication of complete dentures: the master casts from a conventional impression techniques were scanned first, and the wax denture was fabricated using Amann Girrbach’s Ceramill full denture system (fds). The purpose of this paper is to introduce the case in which making an esthetically and functionally satisfied denture in shorter time is possible with CAD/CAM technology.
참고문헌 (17)
- Beuer F, "Digital dentistry : an overview of recent developments for CAD", CAM generated restorations, 2008, pp.204, 505~511
- Davidowitz G, "The use of CAD", CAM in dentistry, 2011, pp.55, 559~570
- Alghazzawi TF, "Advancements in CAD", CAM technology : Options for practical implementation, 2016, pp.60, 72~84
- Patel N, "Integrating three-dimensional digital technologies for comprehensive implant dentistry", J Am Dent Assoc, 141, pp.20S~24S (2010)
- Maeda Y, "A CAD", CAM system for removable denture. Part I: Fabrication of complete dentures, 1994, pp.7, 17~21
- Infante L, "Fabricating complete dentures with CAD", CAM technology, 2014, pp.111, 351~355
- Bidra AS, "The 2-visit CAD-CAM implant-retained overdenture : a clinical report", J Oral Implantol, 40, pp.722~728 (2014)
- Kattadiyil MT, "CAD", CAM complete dentures : a review of two commercial fabrication systems, 2013, pp.41, 407~416
- Pereyra NM, "Comparison of Patient Satisfaction in the Fabrication of Conventional Dentures vs. DENTCA (CAD", CAM) Dentures: A Case Report, 2015, pp.86, 26~33
- Zarb GA, "Prosthodontic treatment for edentulous patients: Complete dentures and implantsupported prostheses", pp.1~27 (2013), CV Mosby
- Boucher CO, "Complete denture prosthodontics-The state of the art", J Prosthet Dent, 34, pp.372~383 (1975)
- Wimmer T, "Complete denture fabrication supported by CAD", CAM, 2016, pp.115, 541~546
- Bidra AS, "Computer-aided technology for fabricating complete dentures : systematic review of historical background, current status, and future perspectives", J Prosthet Dent, 109, pp.361~366 (2013)
- Goodacre CJ, "CAD", CAM fabricated complete dentures : concepts and clinical methods of obtaining required morphological data, 2012, pp.107, 34~46
- Sykora O, "Comparison of the dimensional stability of two waxes and two acrylic resin processing techniques in the production of complete dentures", J Oral Rehabil, 17, pp.219~227 (1990)
- Stawarczyk B, "Accuracy of digitally fabricated wax denture bases and conventional completed complete dentures", Dent J (Basel), 5, pp.E36~ (2017)
- Chen JC, "Effect of denture thickness and curing cycle on the dimensional stability of acrylic resin denture bases", Dent Mater, 4, pp.20~24 (1988)