CAD/CAM을 이용한 구치부 전부도재 고정성 국소의치 지르코니아 코어의 연결부 설계에 따른 파절강도

참고문헌 (34)

1. Ardlin BI, "Transformation-toughened zirconia for dental inlays, crowns and :bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure", Dent Mater, 18, pp.590~595 (2002)
2. Sobrinho LC, "Investigation of the dry and wet fatigue properties of three all-ceramic crown systems", Int J Prosthodont, 11, pp.255~262 (1998)
3. Campbell SD, "Evaluation of the fit and strength of an all-ceramic fixed partial denture", J Prosthet Dent, 59, pp.301~306 (1998)
4. Nakamura T, "Fracture resistance of pressable glass-ceramic fixed partial dentures", J Oral Rehabilitation, 29, pp.951~955 (2002)
5. Tinschert J, "Fracture resistance of lithium disilicate-,alumina-,and zirconiabased three-unit fixed partial dentures: laboratory study", Int J Prosthodont, 14, pp.231~238 (2001)
6. Piconi C, "Review zirconia as a ceramic biomaterial", Biomaterials, 20, pp.1~25 (1999)
7. Guazzato M, "Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part Ⅰ. Pressable and alumina glass-infiltrated ceramics", Dent, 20, pp.441~448 (2004)
8. Tinschert J, "Marginal fit of alumina- and zirconia-based fixed partial dentures produced by a CAD", CAM system, 2001, pp.26, 367~374
9. Luthardt RG, "Accuracy of mechanical digitizing with a CAD", CAM system for fixed restorations, 2001, pp.14, 146~151
10. Willer J, "Computerassisted milling of dental restorations using a new CAD", CAM data acquisition system, 1998, pp.80, 346~351
11. El-Ebrashi MK, "Experimental stress analysis of dental restorations. Part Ⅶ. Structural design and stress analysis of fixed partial dentures", J Prosthet Dent, 23, pp.177~186 (1970)
12. Kelly JR, "Failure of all-ceramic fixed partial dentures in vitro and in vivo:analysis and modeling", J Dent Res, 74, pp.1253~1258 (1995)
13. Fischer H, "Lifetime prediction of all-ceramic bridges by computational methods", J Dent Res, 82, pp.238~242 (2003)
14. Kupiec KA, "Evaluation of porcelain surface treatments and agents for composite to porcelain repair", J Prosthet Dent, 76, pp.119~124 (1996)
15. Guazzato M, "Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part Ⅱ. Zirconia-based dental ceramics", Dent Mater, 20, pp.449~456 (2004)
16. Ritter JE, "Predicting lifetimes of materials and material structures", Dent Mater, 11, pp.142~146 (1995)
17. 오남식, "최적설계기법을 이용한 완전도재 가공의치의 연결부 형태 보강", 대한치과보철학회지, 42(2), pp.125~132 (2004), 대한치과보철학회
18. Christel P, "Mechanical properties and short term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia", J Biomed Mater Res, 23, pp.45~61 (1989)
19. Guazzato M, "Strength, reliability and mode of fracture of bilayered porcelain", core ceramics, 2004, pp.17, 142~149
20. MeLaren EA, "CAD", CAM systems, materials, and clinical guidelines for all-ceramic crowns and fixed partial dentures, 2002, pp.23, 637~653
21. Tinschert J, "Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconiabased ceramics", J Dent, 28, pp.259~535 (2000)
22. Oh WS, "Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures", J Prosthet Dent, 87, pp.536~542 (2002)
23. Sorensen JA, "A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic", Pract Perio Aesthet Dent, 11, pp.95~106 (1998)
24. Kamposiora P, "Stress concentration in all-ceramic posterior fixed partial dentures", Quintessence Int, 27, pp.701~706 (1996)
25. Derand P, "Bond strength of luting cements to zirconium oxide ceramics", Int J Prosthodont, 13, pp.131~135 (2000)
26. McCormick JT, "Effect of luting media on the compressive strengths of two types of all-ceramic crown", Quintessence Int, 24, pp.405~408 (1993)
27. Diaz-Arnold AM, "Current status of luting agents for fixed prosthodontics", J Prosthet Dent, 81, pp.135~141 (1999)
28. Kelly JR, "Clinically relevant approach to failure testing of all-ceramic restorations", J Prosthet Dent, 81, pp.652~661 (1999)
29. Korber KH, "Maximal biting force as a factor for consideration in the fabrication of dental restorations", Dent Lab, 31, pp.55~60 (1983)
30. Oh WS, "Influence of connector design on fracture probability of ceramic fixed-partial dentures", J Dent Res, 81, pp.623~627 (2002)
31. SO Koutayas, "Influence of design and mode of loading on the fracture strength of all-ceramic resin-bonded fixed partial dentures: tures An in vitro study in a dual-axis chewing simulator", J Prosthet Dent, 83, pp.540~547 (2000)
32. Kato H, "Bond strength and durability of porcelain bonding systems", J Prosthet Dent, 75, pp.163~168 (1996)
33. Rosentritt M, "In vitro fracture force and marginal adaptation of ceramic crowns fixed on natural and artificial teeth", Int J Prosthodont, 13, pp.387~391 (2000)
34. Kern M, "Influence of water storage and thermal cycling on the fracture strength of all-porcelain, resinbonded fixed partial dentures", J Prosthet Dent, 71, pp.251~256 (1994)

관련 논문AI추천