임플란트 수술용 가이드를 사용한 부분 유도 임플란트 수술의 정확도 평가: 증례보고
An assessment of accuracy of half-guided implant surgery using implant surgical guide: A case report
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
무치악 환자의 치료에서 치과용 임플란트를 이용한 보철치료는 현재 널리 사용되고 있는 치료 방법 중 하나이다. 임플란트를 적절한 위치에 정확히 식립하기 위해 최근 임플란트 수술용 가이드를 이용하여 임플란트 수술의 정확도를 향상시키는 방법이 소개되어 폭넓게 사용되고 있다. 임플란트 수술시 임플란트 수술용 가이드를 적용하는 수준에 따라 완전 유도 임플란트 수술과 부분 유도 임플란트 수술로 구분할 수 있다. 비록 완전 유도 임플란트 수술이 더 높은 정확도를 보이는 것은 사실이나 수술상황에서의 다양한 임상적 환경 등으로 인해서 부분 유도 임플란트 수술이 종종 시행된다. 이 증례는 치아파절과 치주염 등으로 치아를 상실하게 된 부분무치악 환자에서 임플란트와 고정성보철물을 이용해서 보철 수복 치료를 시행한 사례이다. 임플란트 수술 과정에서 임플란트 수술용 가이드를 사용해서 부분 유도 임플란트 수술을 시행하였으며, 임플란트 수술 계획과 수술 결과 간의 정확도에 대한 분석을 시행하여 소개하였다.
Abstract
Nowadays, dental implant is one of the widely used treatment options for edentulous patients. Recently, a method of improving the accuracy of implant surgery using an implant surgical guide has been introduced and widely used in order to accurately place the implant in a proper position. Full-guided and half-guided implant surgery can be distinguished according to the level of surgical guide application during the implant surgery. It is true that full-guided implant surgery exhibits higher accuracy, but half- guided implant surgery is often performed in a clinical situation due to the factors such as the circumstances of the operation. A partially edentulous patient who lost teeth due to tooth fracture and periodontal disease was treated using implant and fixed prosthesis. Half-guided implant surgery was performed using an implant surgical guide during implant surgery, the accuracy of implant placement was analyzed.
참고문헌 (19)
- Buser D, "Optimizing esthetics for implant restorations in the anterior maxilla : anatomic and surgical considerations", Int J Oral Maxillofac Implants, 19, pp.43~61 (2004)
- González-García R, "The reliability of cone-beam computed tomography to assess bone density at dental implant recipient sites : a histomorphometric analysis by micro-CT", Clin Oral Implants Res, 24, pp.871~879 (2013)
- Parsa A, "Bone quality evaluation at dental implant site using multislice CT, micro-CT, and cone beam CT", Clin Oral Implants Res, 26, pp.e1~e7 (2015)
- Bover-Ramos F, "Accuracy of implant placement with computer-guided surgery : A systematic review and meta-analysis comparing cadaver, clinical, and in vitro studies", Int J Oral Maxillofac Implants, 33, pp.101~115 (2018)
- Vieira DM, "Clinical accuracy of flapless computer-guided surgery for implant placement in edentulous arches", Int J Oral Maxillofac Implants, 28, pp.1347~1351 (2013)
- Kühl S, "Accuracy of full guided vs. half-guided implant surgery", Clin Oral Implants Res, 24, pp.763~769 (2013)
- Papaspyridakos P, "Digital versus conventional implant impressions for edentulous patients : accuracy outcomes", Clin Oral Implants Res, 27, pp.465~472 (2016)
- Esposito M, "The effectiveness of immediate, early, and conventional loading of dental implants: a Cochrane systematic review of randomized controlled clinical trials", Int J Oral Maxillofac Implants, 22, pp.893~904 (2007)
- Gallucci GO, "Consensus statements and clinical recommendations for implant loading protocols", Int J Oral Maxillofac Implants, 29, pp.287~290 (2014)
- 이두형, "Accuracy of a direct drill-guiding system with minimal tolerance of surgical instruments used for implant surgery: a prospective clinical study", The Journal of Advanced of Prosthodontics, 8(3), pp.207~213 (2016), 대한치과보철학회[DOI]
- Cassetta M, "Accuracy of a computer-aided implant surgical technique", Int J Periodontic Restor Dent, 33, pp.317~325 (2013)
- Vasak C, "Computed tomography-based evaluation of template(NobelGuide™)-guided implant positions : a prospective radiological study", Clin Oral Implants Res, 22, pp.1157~1163 (2011)
- Vercruyssen M, "A randomized clinical trial comparing guided implant surgery(bone-or mucosa-supported)with mental navigation or the use of a pilot-drill template", J Clin Periodontol, 41, pp.717~723 (2014)
- Arisan V, "Accuracy of two stereolithographic guide systems for computer-aided implant placement : a computed tomography-based clinical comparative study", J Periodontol, 81, pp.43~51 (2010)
- Cassetta M, "Accuracy of two stereolithographic surgical templates : a retrospective study", Clin Implant Dent Relat Res, 15, pp.448~459 (2013)
- Valente F, "Accuracy of computeraided oral implant surgery : a clinical and radiographic study", Int J Oral Maxillofac Implants, 24, pp.234~242 (2009)
- Fluegge T, "A novel method to evaluate precision of optical implant impressions with commercial scan bodies-an experimental approach", J Prosthodont, 26, pp.34~41 (2017)
- Shimizu S, "The accuracy of the CAD system using intraoral and extraoral scanners for designing of fixed dental prostheses", Dent Mater J, 36, pp.402~407 (2017)
- Su TS, "Comparison of repeatability between intraoral digital scanner and extraoral digital scanner : An in-vitro study", J Prosthodont Res, 59, pp.236~242 (2015)