The Distribution Condition and Clothing Construction Factors of the Working Clothes+ - Reference to the Changwon National Industrial Complex -
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer’s dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.
Abstract
To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer’s dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.
참고문헌 (19)
- Changwon City, "(Apr. 2007). Southeast Industrial Complex Corporation", ~ (2007)
- Kim, K. S., "Workers’ Health Status Related Working Environments in Small and Medium Sized Industries", The Korean Journal of Occupational Medicine, 5(1), pp.3~14 (1993)
- Park, D. U., "Measurement of Working Environments", pp.3~5 (2002), Korea National Open University Press
- 최정화, "철도 차량 정비 작업자의 부직포 보호 작업복 착용 실태에 관한 연구", 한국의류학회지, 28(8), pp.1165~1174 (2004), 한국의류학회
- Lee, O. H., "Female Workers’ Uniform Preference of the Fiber Firms", Journal of the Korean Home Economics Association, 35(4), pp.185~198 (1997)
- Bae, H. S., "Status quo Analysis on the Clothing Practice of Atomaker’s Uniform", Journal of the Korean Home Economics Association, 39(7), pp.115~124 (2001)
- 김혜령, "機械工業 종사자의 작업복 착용 실태조사 연구", 복식문화연구, 10(6), pp.718~734 (2002), 복식문화학회
- 박순자, "생활폐기물 소각장 작업자의 작업환경과 작업복 현황 분석", 한국의류학회지, 27(8), pp.992~1003 (2003), 한국의류학회
- Choi, J. W., "op. cit. pp.1165-1174", ~
- 김성숙, "건설현장 근로자의 작업복 실태조사", 한국의류산업학회지, 8(2), pp.203~208 (2006), 한국의류산업학회
- Yi, K. H., "A Suggestion of Sizing System for Clean Room Wear", Journal of the Korean Society of Clothing and Textiles, 24(7), pp.1044~1055 (2000)
- Lee, Y. J., "Development of Cleanroom Garment Design in Semiconductor Industrial Environment", Journal of the Korean Society of Clothing and Textiles, 26(2), pp.337~348 (2002)
- Sohn, B., "A Study on the Development and Evaluation of Mine Detective Gear", Journal of the Korean Society of Clothing and Textiles, 25(4), pp.707~718 (2001)
- Hong, K. H., "Functional Design Process of Coveralls for the Improvement of Mobility", Journal of the Korean Society of Clothing and Textiles, 20(2), pp.311~322 (1996)
- "Personal Protective Equipment Regulations"[URL]
- American National Standards Institute and National Society of Safety Engineers, "American National Standard: Practice for Occupational and Educational Eye and Face Protection, New York: American National Standards Institute, ANSI Z87.1-1989", ~ (1989)
- "Personal Protective Equipment Regulations"[URL]
- Bae, H. S., "op. cit. pp.115-124", ~
- Kim, H. R., "op. cit. pp.718-734"