TBM 디스크 커터의 암석절삭에 관한 수치해석적 연구
Numerical study on rock fragmentation by TBM disc cutter
0
조회
0
다운로드
13
인용
0
참고문헌
키워드
초록
A series of numerical experiments were carried out to simulate the rock cutting behavior by TBM disc cutter in a given rock condition. AUTODYN-3D, a commercial program capable of simulating three-dimensional dynamic failure, was utilized to carry out the numerical tests over four different disc cutter spacing conditions. After modelling three-dimensional geometries of disc cutter and rock specimen, the linear cutting tests by a disc cutter were simulated for eight different types of rocks. The numerical result, that is the optimum cutter spacing for isotropic rocks had the good agreements with those from linear cutting test. However, for relatively anisotropic or jointed rocks, the specific energy obtained from the numerical tests was almost two-times bigger than the real linear cutting results. Therefore, to simulate cutting procedures for anisotropic rocks realistically, further studies would be necessary.
Abstract
A series of numerical experiments were carried out to simulate the rock cutting behavior by TBM disc cutter in a given rock condition. AUTODYN-3D, a commercial program capable of simulating three-dimensional dynamic failure, was utilized to carry out the numerical tests over four different disc cutter spacing conditions. After modelling three-dimensional geometries of disc cutter and rock specimen, the linear cutting tests by a disc cutter were simulated for eight different types of rocks. The numerical result, that is the optimum cutter spacing for isotropic rocks had the good agreements with those from linear cutting test. However, for relatively anisotropic or jointed rocks, the specific energy obtained from the numerical tests was almost two-times bigger than the real linear cutting results. Therefore, to simulate cutting procedures for anisotropic rocks realistically, further studies would be necessary.
참고문헌 (18)
- 급속터널 기계화 시공을 위한 최적 굴착 설계모델 개발, "건설교통부", 건설핵심기술연구개발사업, 168~213 (2007)
- 박관인, "선형절삭시험에 의한 TBM 디스크 커터의 최적 절삭조건 예측", 한국암반공학회 2006 춘계학술발표회 논문집, pp.217~236 (2006)
- 백승한, "TBM 커터 관입에 의한 암석 파쇄의 수치해석적 연구", 터널과 지하공간, 13(6), pp.444~454 (2003), 한국암반공학회
- 유상화, "TBM에 사용되는 디스크 커터에 의한 암석절삭에 관한 연구", 석사, pp.2007
- 유상화, "동적 파괴모델링에 의한 TBM 디스크 커터의 최적 간격 추정", 한국암반공학회 2007 춘계학술발표회 논문집, pp.337~350 (2007)
- 장수호, "디스크 커터를 장착한 TBM 커터헤드의 최적 설계모델 도출을 위한 영향인자 분석", 대한토목학회 논문집C, 27(1C), pp.87~98 (2007), 대한토목학회
- "한국암반공학회 ,암반공학 수치해석, 건설정보사", ~ (2005)
- 부산지하철 230공구 쉴드터널현장 기술자문 최종보고서, , 한국터널공학회, 176~202 (2001)
- "Century DynamicsAUTODYN theory manual, .", 162~207 (2003)
- Chang, Soo-Ho, "Performance prediction of TBM disc cutting on granitic rock by the linear cutting test", Tunnelling and Underground Space Technology, 21, pp.271~ (2006)
- Chen, W.F, "Plasticity for structural engineers", pp.46~401 (1988), Springer-Verlag
- Gong, Q.M., "Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters", Tunnelling and Underground Space Technology, 20, pp.183~191 (2005)
- Hood, M., "A review of non-explosive rock breaking", pp.11~41 (1989), HDRK Mining Research Ltd.,
- Hudson, J.A, "Engineering rock mechanics", pp.89~92 (1997), Elsevier Science Inc.
- Johnson, G.R, "Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures", Engineering Fracture Mechanics, 21(1), pp.31~48 (1985)
- Roxborough, F.F, "Rock excavation by disc cutter", International Journal of Rock Mechanics and Mining Science and Geomechanics Abstract, 12, pp.361~366 (1975)
- Snowdon, R.A., "A study of disc cutting in selected British rocks", International Journal of Rock Mechanics and Mining Science and Geomechanics Abstract, 19, pp.107~121 (1982)
- Stassi-d’Alia, F, "Flow and fracture of materials according to a new limiting condition of yielding. Meccanica, 3", 178~195 (1967)