요소제거모델을 활용한 열전달해석에서 터널 화재이력곡선의 초기가열구배에 따른 대류열전달계수의 변화
Variation of Time-dependent Convection Heat Transfer Coefficients in Heat Transfer Analysis at Various Initial Heating Rates of Tunnel Fire Scenarios
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 화재에 의한 콘크리트의 단면손실과 역학적 특성을 저하하는 주요 요인 가운데 온도증가율, 즉 초기가열구배를 변화시키면서 모의화재실험을 수행하였다. 그리고 수행된 모의화재실험에서 관찰된 단면손실을 모사하기 위하여 요소제거모델을 활용한 유한요소해석법에 의해 열전달해석을 수행하였다. 이때 모의화재실험결과와 수치해석결과가 가장 일치하는 대류열전달계수를 반복적인 해석과정을 통해 도출하였다. 이상의 과정으로부터 얻어진 초기가열구배에 따른 대류열전달계수의 변화를 조사한 결과, 각 초기가열구배별 대류열전달계수의 변화는 분수함수 형태로 근사시킬 수 있었다. 최종적으로 모의화재실험으로부터 도출된 초기가열구배별 대류열전달계수의 변화 결과를 내삽하여 다양한 초기가열구배에 따른 화재경과시간별 대류열전달계수의 변화를 추정할 수 있는 수식을 함께 제시하였다.
Abstract
The initial heating rate is well known as one of the most influencing factors on the occurrence of spalling and the loss of strength in concrete after fire initiation. In this study, a series of fire tests were carried out at different initial heating rates to find out its effects on the deterioration of tunnel structural members. Heat transfer analyses combined with an element elimination model were also carried out to verify its applicability in the same conditions as the fire tests. Moreover, the convection heat transfer coefficients compatible with fire test results were derived from parametric studies. In this course, their time-dependent variations were also analyzed at different initial heating rates. Finally, a numerical formula to estimate the heat transfer coefficients at the various initial heating rates was proposed by the interpolation of the results of numerical analyses.
참고문헌 (35)
- 건설교통부, "터널설계기준", ~ (2007)
- 장수호, "화재에 의한 터널구조물 시공재료의 손상 평가", 대한토목학회 논문집C, 26(3C), pp.219~228 (2006), 대한토목학회
- 장수호, "화재 후 터널구조물 시공재료의 역학적 특성변화", 한국터널지하공간학회 논문집, 9(2), pp.157~169 (2007), 사단법인 한국터널지하공간학회
- 장수호, "요소제거기법을 적용한 지하구조물의 화재손상 예측모델 개발", 한국터널지하공간학회 논문집, 10(4), pp.313~328 (2008), 사단법인 한국터널지하공간학회
- 최순욱, "ISO834(4시간) 화재이력곡선에서의 침매터널 내화재 성능평가", 제35회 대한토목학회 정기학술대회 논문집, pp.1015~1018 (2009)
- 日本コンクーリト工學協會, "コンクーリト構 造物の火災安全性硏究委員會報告書", 94~112 (2002)
- ACI, "Standard Method for Determining Fire Resistance of Concrete and Mansonry Construction Assemblies", ACI 216.1-97, 1997, pp.1~26
- Ahmed, G.N, "Modelling of coupled heat and mass transfer in concrete structures exposed to elevated temperatures", 박사, pp.1990
- ASCE, "Standard calculation method for structural fire protection", American Society of Civil Engineers, ~ (1999)
- Boström, L, "Concrete for tunnel linings exposed to severe fire exposure", Fire Technology, 42, pp.351~362 (2006)
- Buchanan, A. H, "Structural Design for Fire Safety" (2002), WILEY
- Caner, A, "Structural fire performance of concrete and shotcrete tunnel liners", J. Struct. Eng., 131(12), pp.1920~1925 (2005)
- Capua, D.D, "Nonlinear analysis of reinforced concrete cross-sections exposed to fire", Fire Safety Journal, 42, pp.139~149 (2007)
- Carvel, R, "The history and future of fire tests", Tunnels & Tunnelling International, 34~35 (2002)
- EN1992-1-2 Eurocode 2, "Design of concrete structures, Part 1-2: General rules - Structural Fire Design", Commission of European Communities, ~ (2004)
- Haack, A, "Fire protection in traffic tunnels: general aspects and results of the EUREKA project", Tunneling and Underground Space Technology, 13(4), pp.377~381 (1998)
- Hertz, K.D, "Limits of spalling of fire-exposed concrete", Fire Safety Journal, 38, pp.103~116 (2003)
- Ingason, H, "Recent achivements regarding measuring of time-heat and time-temperature development in tunnels", 1st International Symposium on Safe&Reliable Tunnels (2004)
- "GUIDELINES FOR STRUCTURAL FIRE RESISTANCE FOR ROAD TUNNELS", ITA WG-6, ~ (2004)
- Khoury, G.A, "Effect of fire on concrete and concrete structures", Prog. Struct. Engng Mater., 2, pp.429~447 (2000)
- Khoury, G.A, "Modelling of heated concrete", Magazine of Concrete Research, 54(2), pp.77~101 (2002)
- Khoylou N, "Modelling of moisture migration and spalling behaviour in non-uniformly heated concrete", 박사, pp.1997
- Kodur, V.K.R, "Spalling in high strength concrete exposed to fire-concerns, causes, critical parameters and cures", Proceedings, ASCE Structures Congress (2000)
- Kodur, V.K.R, "A numerical model for predicting the fire resistance of reinforced concrete beams", Cement & Concrete Composites, 30, pp.431~443 (2008)
- Kodur, V.K.R, "Critical factors governing the fire performance of high strength concrete systems", Fire Safety J., 42, pp.482~488 (2007)
- Kwak, H.Y, "Non-structural cracking in RC walls part I. finite element formulation", Cement and Concrete Research, 36, pp.749~760 (2006)
- Lamond, J.F, "Significance of tests and properties of concrete & concrete-making materials" (2006), ASTM international
- Lamont, S, "Heat transfer analysis of the composite slab in the cardington frame fire tests", Fire Safety Journal, 36, pp.815~839 (2001)
- Ono, K, "Fire design requirement for various tunnel", Proc. of 32nd ITA - World Tunnel Congress (2006)
- Peng, G-F, "Evaluation of fire damage to high performance concrete", 박사, pp.2000
- Phan, L.T, "Fire performance of high-strength concrete: A report of the state-of-the-Art, NISTIR 5934", National Institute of Standards and Technology, 59~60 (1996)
- PIARC, "Fire and smoke control in road tunnels", PIARC committee on road tunnels, ~ (1999), 5 May
- Pichler, C, "Safety assessment of concrete tunnel linings under fire load", J. Struct. Eng., 132(6), pp.961~969 (2006)
- Savov, K, "Stability assessment of shallow tunnels subjected to fire load", Fire Safety Journal, 40, pp.745~763 (2005)
- Ulm, F.J, "The chunnel fire. II: Analysis of concrete damage", Journal of Engineering Mechanics, 125(3), pp.283~289 (1999)