해수가 슬러리 쉴드 TBM 공법 적용성에 미치는 영향
Effect of seawater on the applicability of a slurry shield TBM
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
슬러리 쉴드 TBM (Slurry shield TBM) 공법에서 벤토나이트 슬러리의 침투와 필터 케이크의 형성 여부는 공법의 적용성에 영향을 미치는 중요한 요소이다. 그러나 벤토나이트 슬러리는 해수와 접촉하였을 때 팽윤성과 점도가 저하되어 공법에 대한 적용성을 확보하기 어렵다. 본 연구에서는 해수의 영향에 따른 슬러리 쉴드 TBM 공법의 적용성 변화를 평가하기 위해 슬러리의 해수 비율을 다르게 하여 주입 실험을수행하였고 해수가 슬러리의 폐색 현상에 미치는 영향을 확인하였다. 그 결과, 해수의 비율이 0%에서 20%까지 증가할수록 폐색 효과에 의한 슬러리 쉴드 TBM 공법의 적용성을 나타내는 slurry clogging criteria (SCC)가 최대 67%까지도감소하는 것을 확인하였다. 또한 슬러리의 물리적 성질이 동일함에도 지반 조건에 따라 SCC값이 공법 적용에 문제가 없는 수준에서 공법 적용을 위해 슬러리에 추가적인 처리를 요하는 수준으로 변화하는 것을 통해 슬러리 쉴드 TBM의 적용성을 평가할 때 슬러리의 특성뿐만 아니라 지반 조건에 대한 고려도 필요함을 입증하였다.
Abstract
Formation of filter cake with little slurry penetration into the tunnel face ground is an essential factor to successfully apply the slurry shield tunnel boring machine (TBM) for tunnelling work. However, when the bentonite slurry is in contact with seawater, it is not easy to guarantee the filter cake formation due to decrease of the swelling volume and viscosity of the slurry. In this study, in order to evaluate the effect of the seawater on the applicability of the slurry shield TBM method, the slurry injection tests were carried out with the variation of seawater percentage contained in the slurry samples as well as the variation of soil types. And then, the effect of these two factors on the slurry clogging phenomena was theoretically and experimentally figure out. As a result, it was found that the value of the slurry clogging criteria (SCC) indicating the applicability of the slurry shield TBM significantly decreases up to 67% as the percentage of seawater increases from 0% up to 20%. In addition, it was found to be necessary to take into account both the characteristics of slurry and soil types together when judging the applicability of the slurry shield TBM method by assessing the slurry penetration characteristics that will occur during tunnelling work.
참고문헌 (13)
- Almahdawi, F. H. M., "Apparent viscosity direct from marsh funnel test", Iraqi Journal of Chemical and Petroleum Engineering, 15(1), pp.51~57 (2014)
- Anagnostou, G., "The face stability of slurry-shield-driven tunnels", Tunnelling and Underground Space Technology, 9(2), pp.165~174 (1994)
- Arya, L. M., "Predicting soil moisture characteristics from particle-size distribution:an improved method to calculate pore radii from particle radii", Proceedings of the International Workshop on Indirect Methods for Estimating the Hydraulic Properties of Unsaturated Soils, pp.115~124 (1989), University of California
- ASTM, "Standard test method for swell index of clay mineral component of geosynthetic clay liners", ASTM International, ~ (2018)
- DIN 4127, "Earthworks and foundation engineering - test methods for supporting fluids used in the construction of diaphragm walls and their constituent products", Deutsches Institut für Normung, ~ (2014)
- Fritz, P., "Additives for slurry shield in highly permeable ground", Rock Mechanics and Rock Engineering, 40(1), pp.81~95 (2007)
- Gruesbeck, C., "Entrainment and deposition of fine particles in porous media", Society of Petroleum Engineers Journal, 22(6), pp.847~856 (1982)
- 김대영, "해수의 영향에 따른 이수식 TBM의 슬러리 관리를 위한 기초적 연구", 한국터널지하공간학회 논문집, 19(3), pp.463~473 (2017), 사단법인 한국터널지하공간학회[DOI]
- Kim, J. S., "Groutability of cement-based grout with consideration of viscosity and filtration phenomenon", International Journal for Numerical and Analytical Methods in Geomechanics, 33(16), pp.1771~1797 (2009)
- Krause, T., "Schildvortrieb mit flüssigkeits-und erdgestützter ortsbrust", Ph.D., pp.1987
- Min, F. L., "Test study on airtight capability of filter cakes for slurry shield and its application in a case", Advances in Materials Science and Engineering, 2014, pp.1~8 (2014)
- Reddi, L. N., "Analytical solution for fine particle accumulation in soil filters", Journal of Geotechnical and Geoenvironmental Engineering, 123(12), pp.1143~1152 (1997)
- 유영무, "Slurry Clogging Criteria for Slurry Shield Tunnelling in Highly Permeable Ground", KSCE Journal of Civil Engineering, 23(6), pp.2784~2793 (2019), 대한토목학회[DOI]