논문KCI 등재
반파장판을 이용한 광섬유-평면도파로 결합기의 편광 의존성 제거
Elimination of polarization dependency of fiber-to-planar waveguide couplers using a half-waveplate
2
조회
0
다운로드
0
인용
0
참고문헌
주제분류물리학
초록
본 논문에서는 하나의 얇은 반파장판(half-wave plate)을 이용하여 광섬유-평면도파로 결합기(fiber-to-planar waveguide coupler)의 편광 의존성을 줄이기 위한 방법이 제안되었고 실험적으로 검증 되었다. 소자의 편광의존성 제거 원리를 설명하였고 제조과정을 기술하였다. 실험 결과는 소자의 공진 파장이 입력광의 편광상태에 독립적임을 보였다.
Abstract
In this paper, a method to eliminate the polarization dependent properties of fiber-to-planar waveguide couplers using a thin half-waveplate is proposed and demonstrated. The operation principle of the device is explained and the fabrication technology is presented. It is experimentally shown that the resonance wavelengths of the device are independent of the polarization state of input light
참고문헌 (9)
- "Continuous- fiber modulator with high-bandwidth coplanar strip electrodes", 8(3), pp.355~357 (1996)
- "Widely tunable filter based on side-polished polarisation- maintaining fibre coupler with thermo-optic polymer overlay", 40.(21), pp.1330~1332 (2004)
- "Optical properties of side-polished polarization maintaining fiber coupled with a high index planar waveguide", 230, pp.137~144
- "Elimination of polarization sensitivity in silica-based wavelength division multiplexer using a polyimide half waveplate", 15(10), pp.1947~1957 (1997)
- "Ultrathin(5 mm)flexible refractive waveplate of fluoridated polyimide and elimination of polarization sensitivity in Tinanium-diffused Lithium niobate wavegudie circuits", 37(12A), pp.5 6408~6413 (1998)
- "Investigation of coupling Between a fiber and an infinite slab", 7(1), pp.122~130 (1989)
- "Coupling between an optical fiber and a planar waveguide", 126, pp.293~307
- "Polarizing properties of optical coupler composed of single mode side-polished fiber and multimode metal-clad planar waveguide", 180, pp.37~42 (2000)
- "Polarizing properties of optical coupler composed of single mode side-polished fiber and multimode metal-clad planar waveguide", 180, pp.37~42 (2000)
관련 논문AI추천
금속층이 포함된 측면 연마 광섬유 결합기의 편광 분리 특성김광택, 황보승한국광학회 · 한국광학회지2002 · 제13권 제2호얇은 금속 중간층이 포함된 광섬유-평면도파로 결합기김광택, 손경락, 윤대성한국광학회 · 한국광학회지2003 · 제14권 제4호금속 클래드 평면 도파로와 결합된 측면 연마 광섬유의 파장 및 편광 선택성김광택, 김철호, 마재평, 손경락, 송재원, 이준옥, 황보승, 황중호한국광학회 · 한국광학회지2002 · 제13권 제2호측면 연마 편광 유지 광섬유와 평면 도파로 사이의 소산장 결합을 이용한 광센서강용철, 김광택, 황보승한국센서학회 · 센서학회지2004 · 제13권 제3호편광에 무고나한 매우 짧은 결합 길이를 가지는 새로운 수직 방향성 결합기김부균, 정병민한국광학회 · 한국광학회지2003 · 제14권 제4호중간 결합층이 적층된 측면연마 광섬유 결합기의 해석 및 결합효율 개선김광택, 손경락한국광학회 · 한국광학회지2004 · 제15권 제1호
이 간행물의 다른 논문 (10건)
실리콘 결정면을 이용한 LCD-BLU용 도광판의 미세산란구조 형성이준섭, 최가을, 오차환, 김필수, 송석호pp. 113-120포토폴리머 홀로그램의 실용적 응용을 위한 그 열적 특성 분석김남, 이행수, 김정회, 전석희pp. 121-127큰 회절각을 가진 CGH의 위치에 대한 오차의 보정이재철, 오용호, 고춘수pp. 128-132테이퍼 구조를 갖는 광섬유 브래그 격자를 이용한 전압에 의하여 제어 가능한 광학적 실시간 지연 소자채호동, 이상신pp. 133-1375.12Tb/s (128 채널 x 43 Gb/s) WDM 신호의 전송실험손의승, 정승필, 전상배, 정윤철pp. 143-145
