현대 패션디자인에 표현된 모듈러 시스템의 구조방식
The structural method of modular system expressed in contemporary fashion design
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
This study attempted to figure out the usage of the modular system in other fields through literature review and empirical study, analyze its structural method in fashion. After analyzing architecture & product-related books, the Internet data and previous studies, the modular system’s five structural methods were obtained. Then, 991 photos of women’s clothes from 2003 to 2014 were collected through the fashion websites in Korea and abroad. The results can be summarized as follows: First, the following five structures were derived: assembling structure, overlapping structure, arrangement structure, inserting structure and folding structure. Second, according to analysis on the structural method of the modular system in modern fashion, overlapping structure (34%) was the most common. Third, in fashion, the use of fastener for installation and removal is important for assembling structure. In terms of overlapping structure, 3D volume by vertical accumulation was commonly observed. Arrangement structure revealed a horizontal and flat shape through simple arrangement. In inserting structure, on the contrary, non-standardized modules were used as a part of clothes or decorative elements. In folding structure, origami technique for reduction and expansion was used.
Abstract
This study attempted to figure out the usage of the modular system in other fields through literature review and empirical study, analyze its structural method in fashion. After analyzing architecture & product-related books, the Internet data and previous studies, the modular system’s five structural methods were obtained. Then, 991 photos of women’s clothes from 2003 to 2014 were collected through the fashion websites in Korea and abroad. The results can be summarized as follows: First, the following five structures were derived: assembling structure, overlapping structure, arrangement structure, inserting structure and folding structure. Second, according to analysis on the structural method of the modular system in modern fashion, overlapping structure (34%) was the most common. Third, in fashion, the use of fastener for installation and removal is important for assembling structure. In terms of overlapping structure, 3D volume by vertical accumulation was commonly observed. Arrangement structure revealed a horizontal and flat shape through simple arrangement. In inserting structure, on the contrary, non-standardized modules were used as a part of clothes or decorative elements. In folding structure, origami technique for reduction and expansion was used.
참고문헌 (49)
- Ahn, H. J., "A study of jewelry design using modular system", master, pp.2005
- "Alvisse, M" (2009)[URL]
- "Backlund, S" (2009)[URL]
- Bae, J. H., "A study on the development of "multi furniture design": focused on the modular system", master, pp.2005
- "Celine" (2003)[URL]
- "D & G" (2003)[URL]
- Go, Y. K., "A study on the modular design of unit bath room system", master, pp.2006
- "Hekmat, M" (2011)[URL]
- "Hur, E. S" (2009)[URL]
- Jacobides, M., "Unbundling, standardization and competitive dynamics", Strategic Management Society Conference (1997)
- Jeong, D. Y., "Mass customization" (2008), mplanning
- Ji, J. H., "A study on the customized remodeling by modular method housing", Proceeding of Spring Annual Conference of KHA, 1, pp.2234~3571 (2012)
- Kim, H. Y., "A study on the development of mass customizing the modularized floral art &design", master, pp.2011
- Kim, J. H., "A study on the practical application of modular construction for residental facilities", master, pp.2012
- 김유경, "현대 패션의 모듈러 시스템에 관한 연구", 한국디자인문화학회지, 12(1), pp.24~33 (2006), 한국디자인문화학회
- "Kurokawa, K" (1971)[URL]
- Kwon, Y. H., "Introduction to architecture" (2002), A publishing department of Dongyang University
- "Lara, A., & Nogueron, P" (2009)[URL]
- Lee, B. J., "A general theory of architecture" (2000), Kimoondang
- "Lie, S. B" (2008)[URL]
- "Lynn, G" (2008)[URL]
- "Lynn, T" (2011)[URL]
- "Magformers" (2005)[URL]
- "Mende, B" (2012)[URL]
- "Missoni" (2011)[URL]
- "Miyake, I" (2012)[URL]
- "Molodrsign" (2003)[URL]
- Park, D. J., "A study on the expansion module system of application for animal pictogram design", master, pp.2008
- Park, S. S., "A study on modifiable design in contemporary fashion", master, pp.2008
- "Prat, A" (2011)[URL]
- "Rabanne, P" (2004)[URL]
- "Rag & Bone" (2010)[URL]
- "Ribbe, J" (2004)[URL]
- "Ribbe, J" (2007)[URL]
- "Salm, G., & Salm, J" (2001)[URL]
- Sanchez, R., "Strategic flexibility in product competition", Strategic Management Journal, 16, pp.135~159 (1995)
- "Shigeru, B" (2000)[URL]
- 손수민, "모듈러 시스템을 이용한 공기주입형 다기능 재킷 디자인 - 쿠션, 보온, 휴대 기능을 중심으로 -", 복식문화연구, 20(2), pp.222~237 (2012), 복식문화학회[DOI]
- "Storrs, P" (2009)[URL]
- "Thermaltake" (2011)[URL]
- Ulrich, K., "Fundamental of product modularity", Proceedings of the 1991 ASME Winter Annual Meeting Symposium on Issues in Design, 1991, ~
- "Vandevorst, A. F" (2010)[URL]
- "Victor & Rolf" (2011)[URL]
- 양희영, "20세기후반 이후 패션 구성 방식에 나타난 모듈러 시스템-욜리 탱, 존 리베, 갈야 로젠펠드의 작품을 중심으로-", 한국의류학회지, 32(5), pp.788~799 (2008), 한국의류학회
- 최유진, "오리가미의 표현 기법이 나타난 현대 패션 디자인의 표현 분석", Family and Environment Research, 47(4), pp.1~10 (2009), 대한가정학회
- Yoon, J. Y., "A study on adaptation potential of modular construction for temporary housing for refugees from disaster", master, pp.2006