3D 스캐닝, 3D 모델링, 3D 프린팅 기반의 3D 시스템에 의한 시니어 평발용 인솔 제작
Producing the insoles for flat feet of senior men using 3D systems based on 3D scanning, 3D modeling, and 3D printing
0
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat- footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects’ 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.
Abstract
This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat- footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects’ 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.
참고문헌 (38)
- "Custom 3D printed insoles from Phits help athletes recover from injury" (2016)[URL]
- "3D printed insole startup Wiivv wearables looking well-heeled: $4M raised, competitor eSoles acquired" (2017)[URL]
- Butdee, S., "Formulation of 3D shoe sizes using scanning camera and CAD modelling", Journal of Achievements in Materials and Manufacturing Engineering, 31(2), pp.449~455 (2008)
- Choi, J. I., "Development of design technique of Korean standard last for production of healthyfunctional shoes", doctor, pp.2015
- Choi, S. H., "Foot shape classifying of women in Korea with 3D foot scan data", doctor, pp.2005
- Michael J. Coughlin, "Correlation of Harris Mats, Physical Exam, Pictures, and Radiographic Measurements in Adult Flatfoot Deformity", Foot & Ankle International, 30(7), pp.604~612 (2009), SAGE Publications[DOI]
- "Seoul National University Hospital, Medical Information"[URL]
- "3D Printer and 3D Printing News" (2013)[URL]
- Jang, S. E., (2012), Kyomunsa
- Kang, H. -S., "Foot deformity measurement validity: The relationship between CSI, SAI, RCSP", master, pp.2012
- Kim, E. -H., "The impact that the exercise influence on the foot form and footprint", master, pp.2003
- Kim, G. Y., "A study on the shape of women's foot arches", doctor, pp.2001
- Kim, J. H., "Development of foot-measuring toolkit and modeling process for designing customized round toe midsole with 3D printing technology", master, pp.2015
- Kim, K. -H., "Biomechanical analysis of arch support devices on normal and low arch", master, pp.2011
- Kim, N. S., "A study on foot shape and shoe sizing system for the elderly", doctor, pp.2013
- Kim, Y. -D., "A case study on the development of insloes for seniors in preparation for aged society", master, pp.2015
- Korean Agency for Technology and Standards, "Sizing system for shoes(KS M 6681 : 2007, 2012 confirmed)", Korean Agency for Technology and Standards, ~ (2012)
- Korean Agency for Technology and Standards, "Assembly middle insole of shoes(KS G 3406 : 1994, 2014 confirmed)", Korean Agency for Technology and Standards, ~ (2014)
- 이지은, "성인 남성의 연령대별 발 형태 분류", 한국의류산업학회지, 10(5), pp.644~651 (2008), 한국의류산업학회
- Lee, J. Y., "The investigation of the shoe-last size classification system for Korean adults with 3D foot-scanner", doctor, pp.2004
- Yu-Chi Lee, "Comparing 3D foot scanning with conventional measurement methods", Journal of Foot and Ankle Research, 7(1) (2014), Springer Nature[DOI]
- Lee, Y. -J., "The relationship of balance and walking with prefered type of shoes in the elderly", The Journal of Occupational Therapy for the Aged and Dementia, 1(1), pp.30~37 (2007)
- 임영문, "편안한 신발 제작을 위한 발 유형화", 한국안전학회지, 22(6), pp.81~86 (2007), 한국안전학회
- 임호선, "3D printed midsole design according to the sole types of elementary school students", 복식문화연구, 24(3), pp.315~323 (2016), 복식문화학회[DOI]
- "Proceedings of Spring Conference of the Ergonomics Society of Korea and 18th Korea-Japan Joint Symposium", 2016, 543~546
- George S Murley, "A protocol for classifying normal- and flat-arched foot posture for research studies using clinical and radiographic measurements", Journal of Foot and Ankle Research, 2(1) (2009), Springer Nature[DOI]
- 오혁근, "맞춤형 수제화 제작을 위한 라스트 생산의 전산화에 대한 연구 - 3차원 스캐너에 의한 데이터 생성을 중심으로 -", 디지털디자인학연구, 13(2), pp.29~36 (2013), 한국디지털디자인학회
- 오설영, "3D 발 스캐너와 3D 프린터를 이용한 남성화 라스트 설계", 한국콘텐츠학회 논문지, 16(2), pp.186~199 (2016), 한국콘텐츠학회[DOI]
- 박재경, "신발류 치수체계 설정을 위한 노년 여성의 발 형태 유형화", 복식, 55(2), pp.33~44 (2005), 한국복식학회
- Park, J. Y., "June). Comparative analysis of 3D foot scan method and 3D laser scan method for development of custom-made insole", Proceedings of Korean Society for Precision Engineering(KSPE)2009 Spring Conference, pp.969~970 (2009)
- "Phits at the Rio Olympics" (2016)[URL]
- "About Phits insoles"[URL]
- "Phits expert workflow - from scan to insoles"[URL]
- 석혜정, "노년 남성의 발 유형 분류", 복식, 57(10), pp.50~59 (2007), 한국복식학회
- Shi, N., "A CAD system for shoe last customization", Proceedings of 2009 International Joint Conference on Computational Sciences and Optimization (CSO 2009), 1, pp.957~960 (2009)
- 송성재, "신발패턴의 3차원 설계를 위한 곡면의 평면전개에 관한 연구", 한국CDE학회 논문집, 9(3), pp.266~275 (2004), 한국CDE학회
- 송응열, "개인 맞춤형 자동 변형 인솔 모델", 한국정보전자통신기술학회 논문지, 9(4), pp.323~329 (2016), 한국정보전자통신기술학회
- Shuping Xiong, "A computer-aided design system for foot-feature-based shoe last customization", The International Journal of Advanced Manufacturing Technology, 46(1-4), pp.11~19 (2010), Springer Nature[DOI]