동작 가변적 3D 프린팅 충격보호패드의 설계
Design of motion-adaptable 3D printed impact protection pad
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this study was to develop a 3D mesh-type impact protection pad with excellent motion adaptability and functionality by applying 3D printing technology. The hexagonal 3D mesh, which constitutes the basic structure of the pad, comprises two types: small and large. The bridge connecting the basic units was designed as the I-type, V-type, IV-type, and VV-type. After evaluating the characteristics of the bridge, it was found that the V-type bridge had the highest flexibility and tensile elongation. The hip joint pad and knee pad were completed by combining the hexagonal 3D mesh structure with the optimal bridge design. The impact protection pad was printed using a fused deposition modeling-type 3D printer with a filament made of thermoplastic polyurethane material, and the protection pad’s performance was evaluated. When an impact force of approximately 6,500N was applied to the pad, the force attenuation percentage was 78%, and when an impact force of approximately 8,000N was applied, the force attenuation percentage was 75%. Through these results, it was confirmed that the 3D-printed impact protection pad with a hexagonal 3D mesh structure connected by a V-shaped bridge developed in this study can adapt to changes in the body surface according to movement and provides excellent impact protection performance.
Abstract
The purpose of this study was to develop a 3D mesh-type impact protection pad with excellent motion adaptability and functionality by applying 3D printing technology. The hexagonal 3D mesh, which constitutes the basic structure of the pad, comprises two types: small and large. The bridge connecting the basic units was designed as the I-type, V-type, IV-type, and VV-type. After evaluating the characteristics of the bridge, it was found that the V-type bridge had the highest flexibility and tensile elongation. The hip joint pad and knee pad were completed by combining the hexagonal 3D mesh structure with the optimal bridge design. The impact protection pad was printed using a fused deposition modeling-type 3D printer with a filament made of thermoplastic polyurethane material, and the protection pad’s performance was evaluated. When an impact force of approximately 6,500N was applied to the pad, the force attenuation percentage was 78%, and when an impact force of approximately 8,000N was applied, the force attenuation percentage was 75%. Through these results, it was confirmed that the 3D-printed impact protection pad with a hexagonal 3D mesh structure connected by a V-shaped bridge developed in this study can adapt to changes in the body surface according to movement and provides excellent impact protection performance.
참고문헌 (18)
- W.J. Choi, "The effect of positioning on the biomechanical performance of soft shell hip protectors", Journal of Biomechanics, 43(5), pp.818~825 (2010), Elsevier BV[DOI]
- 전은진, "고관절 골절 예방을 위한 힙프로텍터 착용특성 평가", 한국의류산업학회지, 16(6), pp.1001~1007 (2014), 한국의류산업학회
- 전은진, "한국 노인의 3D 인체특성 분석을 통한 Hip protector 치수체계 수립 및 입체패턴 설계", 한국의류산업학회지, 18(1), pp.120~129 (2016), 한국의류산업학회
- 정화연, "패션 산업 내 3D 프린팅 사용 현황 및 패션디자인과 내의 활용방안", 한국의상디자인학회지, 18(3), pp.245~260 (2016), 한국의상디자인학회
- J. A. Kanis, "The Burden of Osteoporotic Fractures: A Method for Setting Intervention Thresholds", Osteoporosis International, 12(5), pp.417~427 (2001), Springer Science and Business Media LLC[DOI]
- Kannus, P., "Prevention of falls and consequent injuries in elderly people", The Lancet, 366(9500), pp.1885~1893 (2005)[DOI]
- 김민정, "식품 3D 프린팅 기술과 3D 프린팅 식품 소재", Clean Technology, 26(2), pp.109~115 (2020), 한국청정기술학회
- 김윤미, "골다공증 유병률, 인지율, 치료율 및 영향요인의 성별 비교: 국민건강영양조사 자료(2008~2011년) 활용", Journal of Korean Academy of Nursing, 45(2), pp.293~305 (2015), 한국간호과학회
- 김영삼, "기계 미학적 관점에서 살펴본 3D Printing 패션의 조형적 특성", 복식문화연구, 23(2), pp.294~309 (2015), 복식문화학회[DOI]
- 오설영, "3D 스캐닝, 3D 모델링, 3D 프린팅 기반의 3D 시스템에 의한 시니어 평발용 인솔 제작", 복식문화연구, 25(3), pp.270~284 (2017), 복식문화학회[DOI]
- Peter D. O’Halloran, "The effect of type of hip protector and resident characteristics on adherence to use of hip protectors in nursing and residential homes—an exploratory study", International Journal of Nursing Studies, 42(4), pp.387~397 (2005), Elsevier BV[DOI]
- 박정현, "3D 프린팅 기술을 활용한 낙상충격 보호패드 구조설계 및 필라멘트 소재에 따른 특성 비교", 한국의류학회지, 41(5), pp.939~949 (2017), 한국의류학회
- 박정현, "3D 프린팅 기술을 활용한 낙상충격 보호패드 설계 및 구조에 따른 특성비교", 한국의류학회지, 42(4), pp.612~625 (2018), 한국의류학회
- Jung Hyun Park, "Development and Evaluation of Fall Impact Protection Pads Using Additive Manufacturing", Materials, 12(20), pp.3440~ (2019), MDPI AG[DOI]
- 박지수, "에어백을 이용한 신체충격완화장치", 한국생산제조학회지, 21(4), pp.639~643 (2012), 한국생산제조학회[DOI]
- 박석희, "3D프린팅 활용 생체의료분야 기술동향", 한국정밀공학회지, 31(12), pp.1067~1076 (2014), 한국정밀공학회
- Seo, M. B., "Analysis of 3D printing construction technology and case study", Review of Architecture and Building Science, 60(1), pp.42~46 (2015)
- N.M. van Schoor, "Biomechanical comparison of hard and soft hip protectors, and the influence of soft tissue", Bone, 39(2), pp.401~407 (2006), Elsevier BV[DOI]