IEC 61400-27에 근거한 Type 4 풍력발전 시스템의 전기적 시뮬레이션 모델 개발
Development of Type 4 Electrical Simulation Model for Wind Power Generation System according to IEC 61400-27
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
To define the generic simulation model for wind power generation system, International Electrotechnical Commission(IEC) is preparing international standards. The generic model speeds up the simulation and decreases the time for the assessment analysis. This paper introduces the new international standard of IEC 61400-27-1. And it is explained the power control of type 4, which is connected through a full size converter. According to the standard, simulation model is developed using Matlab/Simulink. A sample 2 MW turbine parameters are used for simulation results. The validation for simulation model will be executed by comparison of the field test.
Abstract
To define the generic simulation model for wind power generation system, International Electrotechnical Commission(IEC) is preparing international standards. The generic model speeds up the simulation and decreases the time for the assessment analysis. This paper introduces the new international standard of IEC 61400-27-1. And it is explained the power control of type 4, which is connected through a full size converter. According to the standard, simulation model is developed using Matlab/Simulink. A sample 2 MW turbine parameters are used for simulation results. The validation for simulation model will be executed by comparison of the field test.
참고문헌 (12)
- 송승호, "IEC 61400-27 국제규격 제정을 위한 위원회 활동 보고 한국풍력에너지학회 춘계학술", 한국풍력에너지학회 춘계학술대회 논문집 한국풍력에너지학회, pp.207~210 (2011)
- Abildgaard, H., "IEC 61400-27-1 Electrical simulation models for wind power generation", UWIG Modeling & Interconnection User Group Meeting (2010)
- Pourbeik, P., "Generic stability models for type 3 & 4 wind turbine generators for WECC", Proc. IEEE Power Energy Soc. (PES) Gen. Meeting, pp.1~5 (2013)
- "IEC 61400-27-1, 2015, Wind turbines -Part 27-1: Electrical simulation models - Wind turbines", ~ (2015)
- Technical Guidelines for Power Generating Units - Part3 : Determination of Electrical Characteristics of Power Generating Units Connected to MV, HV and EHV Grids, "FGW", FGW, ~ (2009)
- Technical Guidelines for Power Generating Units - Part4 : Demands on Modeling and Validation Simulation Models of the Electrical Characteristics of Power Generating Units and Systems, "FGW", FGW, ~ (2009)
- Grid Code—Highand Extra HighVoltage, "E.ON-Netz", E.ON Netz GmbH, ~ (2003)
- Sorensen, P., "Overview, status and outline of the new IEC 61400-27 electrical simulation models for wind power generation", The 10th International Workshop on Large-Scale Integration of Wind Power into Power Systems (2011)
- Perdana, A., "Dynamic models of wind turbines", Ph.D, Department of Energy and Environment, pp.2009
- Ellis, A., "Description and Technical Specifications for Generic WTG Models-a status report", Power Systems Conference and Exposition (PSCE), pp.1~8 (2011), IEEE[DOI]
- "Generic Models and Model Validation for Wind and Solar PV Generation: Technical Update", EPRI, 1021763~ (2011)
- Chandrasekaran, S., "Modeling and Simulation of Grid Connected Wind Energy Conversion System (WECS) Based on a Doubly Fed Induction Generator (DFIG)", Third International Renewable Energy Congress (2011)