풍력 발전기 블레이드의 구조 개선에 대한 연구
Study on Structural Improvements of the Wind Turbine Blades
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The wind power energy has been suggested as alternative energy source because it is economically more feasible than other alternative energy technologies. The size of commercial wind turbines has dramatically increased to improve their energy conversion efficiency. The wind turbine blade loads become more important as the wind turbines increase in their size. The modern large-size wind turbine blades generally use sandwich structures and thick laminates to withstand the aerodynamic loads. And the biplane blade design was proposed to use a biplane inboard region to improve overall performance of large blades. The individual pitch control (IPC) facilitates structural load reduction without blade shape alteration. Active flow control methods, such as trailing-edge flap, adaptive compliant wing, micro-tab, have been proposed as viable and effective devices for active load control applications. In order to alleviate the wind turbine blade loads, various researches are under going.
Abstract
The wind power energy has been suggested as alternative energy source because it is economically more feasible than other alternative energy technologies. The size of commercial wind turbines has dramatically increased to improve their energy conversion efficiency. The wind turbine blade loads become more important as the wind turbines increase in their size. The modern large-size wind turbine blades generally use sandwich structures and thick laminates to withstand the aerodynamic loads. And the biplane blade design was proposed to use a biplane inboard region to improve overall performance of large blades. The individual pitch control (IPC) facilitates structural load reduction without blade shape alteration. Active flow control methods, such as trailing-edge flap, adaptive compliant wing, micro-tab, have been proposed as viable and effective devices for active load control applications. In order to alleviate the wind turbine blade loads, various researches are under going.
참고문헌 (17)
- 하종문, "해상풍력발전기의 데이터기반 고장진단 및 예지 연구: 리뷰와 전망", 2012년도 대한기계학회 춘계학술대회 논문집, pp.151~152 (2012)
- Yang, J., "Structural Investigation of Composite Wind Turbine Blade Considering Structural Collapse in Full-Scale Static Tests", Composite Structures, 97, pp.15~29 (2013)
- Tsau, S. W., "Failure Analysis of Composite Materials, Inelastic Behavior of Composite Materials", ASME Winter Annual Meeting (1975)
- Hald, H., "Development and Test of a Light Weight GRP Rotor Blade for the DFVLR 100kW WEC", Wind Power `85 (1985)
- Roth-Johnson, P., "Structural design of spars for 100-m biplane wind turbine blades", Renewable Energy, 71, pp.133~155 (2014)
- Bassanyi, E. A., "Individual blade pitch control for load reduction", Wind Energy, 6(2), pp.119~128 (2003)
- Larsen, T. J., "Active load reduction using individual pitch, based on local blade flow measurements", Wind Energy, 8(1), pp.67~80 (2005)
- Engelen, T. G., "Design model and load reduction assessment for multi-rotational mode individual pitch control (higher harmonics control)", European Wind Energy Conference 2006 (2006)
- 전경언, "풍력발전시스템 개별피치제어설계 및 피로해석에 관한 연구", 대한기계학회논문집 A, 38(1), pp.1~9 (2014), 대한기계학회
- Jeon, G. E., "Design of DAC and Decentralized LQR for Wind Turbine Individual Pitch Control", 2012 KWEA Korea Wind Energy Spring Conference (2012)
- Active Load Control Techniques for Wind Turbines, "Johnson, S. J.", SANDIA, ~, pp.SAND2008-4809 (2008)
- Troldborg, N., "Computational study of the RisøB1-18 airfoil with a hinged flap providing variable trailing edge geometry", Wind Engineering, 29, pp.89~113 (2005)
- Wilson, D. G., "Active aerodynamic blade control design for load reduction on large wind turbines", European Wind Energy Conference & Exhibition (2009)
- Kelkar A. G., "Robust control of a morphing airfoil structure", American control conference 2005 (2005)
- Yen, D. T., "Active load control and lift enhancement using MEM translational tabs", Fluids 2000 Conference and Exhibit (2000)
- Wilson, D. G., "Optimized Active Aerodynamic Blade Control for Load Alleviation on Large wind Turbines", AWEA Wind Power Conference & Exhibition (2008)
- Baek, P., "Modelling the Temporal Response of a Microtab in an Aeroelastic Model of a Wind Turbine", 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (2011)