부유식 해상풍력발전기 타워의 초기 형상에 따른 공진 해석
Resonance Analysis According to Initial Tower Design for Floating Offshore Wind Turbine
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
To maximize power generation and reduce the construction cost of a commercial utility-grade wind turbine, the size of the wind turbine should be large. The initial design of the 12 MW University of Ulsan(UOU) Floating Offshore Wind Turbine(FOWT) was carried out based on the 5 MW National Renewable Energy Laboratory(NREL) offshore wind turbine model. The existing 5 MW NREL offshore wind turbines have been expanded to 12 MW UOU FOWT using the geometric law of similarity and then redesigned for each factor. The resonance of the tower is the most important dynamic responses of a wind turbine, and it should be designed by avoiding resonance due to cyclic load during turbine operations. The natural frequency of the tower needs to avoid being within the frequency range corresponding to the rotational speed of the blades, 1P, and the blade passing frequency, 3P. To avoid resonance, vibration can be reduced by modifying the stiffness or mass. The direct expansion of the 5 MW wind turbine support structure caused a resonance problem with the tower of the 12 MW FOWT and the tower length and diameter was adjusted to avoid a match of the first natural frequency and 3P excitation of the tower.
Abstract
To maximize power generation and reduce the construction cost of a commercial utility-grade wind turbine, the size of the wind turbine should be large. The initial design of the 12 MW University of Ulsan(UOU) Floating Offshore Wind Turbine(FOWT) was carried out based on the 5 MW National Renewable Energy Laboratory(NREL) offshore wind turbine model. The existing 5 MW NREL offshore wind turbines have been expanded to 12 MW UOU FOWT using the geometric law of similarity and then redesigned for each factor. The resonance of the tower is the most important dynamic responses of a wind turbine, and it should be designed by avoiding resonance due to cyclic load during turbine operations. The natural frequency of the tower needs to avoid being within the frequency range corresponding to the rotational speed of the blades, 1P, and the blade passing frequency, 3P. To avoid resonance, vibration can be reduced by modifying the stiffness or mass. The direct expansion of the 5 MW wind turbine support structure caused a resonance problem with the tower of the 12 MW FOWT and the tower length and diameter was adjusted to avoid a match of the first natural frequency and 3P excitation of the tower.
참고문헌 (15)
- ""Wind Power" Growth onshore, hope offshore" (2016)[URL]
- Definition of a 5-MW Reference Wind Turbine for Offshore System Development, "Jonkman, J.", National Renewable Energy Laboratory, ~, pp.NREL (2009), TP-500-38060
- Description of the DTU 10 MW Reference Wind Turbine, "Bak, C", Technical University of Denmark, ~, pp.DTU Wind Energy Report-I-0092 (2013)
- Yun, S., "Analysis of Aerodynamic Tower-Rotor Interaction with the Variation of Tower Diameter for the NREL Phase VI Wind Turbine", Journal of Wind Energy, 3(1), pp.36~41 (2012)
- 김문옥, "풍력타워의 구조형식별 설계경제성 분석", 풍력에너지저널, 8(1), pp.34~42 (2017), 한국풍력에너지학회[DOI]
- DNV-GL, "Guideline for the Certification of Offshore Wind Turbines, Edition 2012", GL Renewables Certification, ~ (2012)
- Kim, J. T., "A Study on Dynamic Responses of 12MW Floating Offshore Wind Turbine Using Fully Coupled Analysis", Masters, pp.2016
- Definition of the Semisubmersible Floating System for Phase II of OC4, "Robertson, A.", National Renewable Energy Laboratory, ~, pp.NREL (2014), TP-5000-60601
- Burton, T., "Wind Energy Handbook" (2011), John Willey & Sons, Ltd
- 김평화, "지반조건 상호작용을 고려한 풍력발전타워의 공진회피 진동수 산정을 위한 고유진동수 해석 연구", 한국산학기술학회논문지, 17(4), pp.734~742 (2016), 한국산학기술학회[DOI]
- FAST User's Guide, "Jonkman, J.M.", National Renewable Energy Laboratory, ~, pp.NREL (2005), EL-500-38230
- User's Guide to MBC3:Multi-Blade Coordinate Transformation Code for 3-Bladed Wind Turbines, "Bir, G. S.", National Renewable Energy Laboratory, ~, pp.NREL (2010), EL-500-44327
- Wind Turbine System Control, "Nam, Y. S.", GS-Intervision, ~ (2013)
- Thomson, W. T., "Theory of Vibration with Applications" (1993), Prentice Hall
- Kim, S. H., "Vibration Characteristics of the Tower Structures of Wind Turbine Generators", The Korean Society for Noise and Vibration Engineering Conference, pp.49~59 (2009)