본문 바로가기
KERD
논문KCI 등재

디지털 트윈 국토 참조 모델 및 데이터 모델 표준구축을 위한 기초 연구

A Fundamental Study on the Standardization of Reference Model and Data Model in Digital Twin for Land

2

조회

0

다운로드

8

인용

0

참고문헌

키워드

초록

디지털 트윈 국토는 한국판 뉴딜 정책의 일환으로 추진 중인 국가 프로젝트이나 이에 대한 표준이나 기술 기준 등은 마련되어 있지 않은 상태이다. 이러한 배경에서 본 연구는 디지털 트윈 국토의 상호 운용성 확보를 위한 공간정보 표준 기반의 참조 모델과 데이터 모델 구축 방안을 제시하는데 목적이 있다. 이를 위해 디지털 트윈에 관한 국제 표준화 동향을 검토하고 주요 시사점을 도출하였다. 그리고 디지털 트윈 국토에 대한 정의, 도메인별 특징을 도출하는 등 디지털 트윈 국토에 대한 개념을 정립하였다. 이러한 개념을 바탕으로 RM-ODP를 이용한 디지털 트윈 국토 참조 모델 구축 방안과 3단계 디지털 트윈 국토 데이터 모델 체계를 제안하였다. 또한 데이터 모델의 효율적 관리를 위한 모델 레지스트리 구축 방안을 제안하였다. 본 연구에서 제안한 정책 방안은 향후 디지털 트윈 국토 표준 체계 구축의 방향성을 확립하는데 기여할 것으로 판단된다.

Abstract

Digital Twin for Land(DTL) is one of the national work projects in the Korean New Deal but there aren’t still any standards and technical guides which would need to construct the DTL. This study presents the policies to develop reference model and data model based on geo-spatial information standards to ensure interoperability for the DTL. In this paper, we first extract the implications through reviewing definitions of Digital Twin used in various literatures and international standardization trends on Digital Twin. In addition, this study attempts to conceptualize the DTL through various ways such as defining the DTL and characterizing DTL domains. Finally, we propose three policies on the standardization of the DTS: (1) DTS reference model by using RM-ODP, (2) three-steps hierarchical data models, and (3) model registry to manage the data models efficiently. The proposed policies of the study would contribute to establish a way for DTS's standards development over the coming years.

참고문헌 (29)

  1. 고영만, "온톨로지 기반 메타데이터 명명 규칙에 관한 연구", 정보관리학회지, 22(4), pp.97~109 (2005), 한국정보관리학회[DOI]
  2. 국가기술표준원, "스마트공장 표준화 동향", ~ (2016)
  3. 지하공간통합지도 갱신 자동화 및 탐사현장 활용지원 기술 개발, "국토교통과학기술진흥원", ~ (2019)
  4. 국토지리정보원, "3차원국토공간정보구축작업규정", ~ (2019)
  5. 김민수, "입체모형 활용 현황, 수요 및 구축 비용을 고려한 실현 가능한 3차원 입체모형 구축 방안 연구", 지적과 국토정보, 50(1), pp.215~229 (2020), 한국국토정보공사[DOI]
  6. 기획재정부, "한국판 뉴딜 종합계획", ~ (2020)
  7. 서울시 공간정보정책 개선 방안, "서울연구원", ~ (2019)
  8. "위키피디아" (2021)[URL]
  9. 이석훈, "IoT 환경을 위한 센서 레지스트리 데이터 모델의 설계 및 구현", 정보처리학회논문지. 소프트웨어 및 데이터 공학, 5(5), pp.221~230 (2016), 한국정보처리학회[DOI]
  10. 이현정, "4차 산업혁명을위한 제조 디지털 트윈 국제표준화 현황", 한국통신학회지, 37(3), pp.43~50 (2020)
  11. 최재연, "사용자 관점의 융・복합 공간정보 품질관리 방안 연구", 지적과 국토정보, 50(1), pp.47~62 (2020), 한국국토정보공사[DOI]
  12. 황병주, "체계적인 공간정보표준 관리를 위한 정책개선 방안 연구", 지적과 국토정보, 46(2), pp.225~237 (2016), 한국국토정보공사[DOI]
  13. 한국국토정보공사, "디지털 트윈 국토 표준 준거모델 개발 및 로드맵 작성", ~ (2020)
  14. 해양수산부, "해양수산 스마트화 전략", ~ (2019)
  15. Bacchiega G, "Creating an Embedded Digital Twin: Monitor, Understand and Predict Device Health Failure", Proceeding of Inn4mech 2018 (2018)
  16. Batty M, "Digital Twins", Environment and Planning B : Urban Analytics and City Science, 45(5), pp.817~820 (2018)
  17. Bolton R, "Customer Experience Challenges : Bringing Together Digital, Physical and Social Realms", Journal of Service Management, 29(5), pp.776~808 (2018)
  18. Glaessgen E, "The Digital Twin Paradigm for Future NASA and US Air Force Vehicles", Proceeding of the 53rd Structures, Structural Dynamics, pp.23~26 (2012)
  19. Grieves M, "Digital Twin : Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems", Transdisciplinary Perspectives on Complex Systems, pp.85~113 (2017)
  20. ISO, "ISO", TS 19127: Geodetic Codes and Parameters, 2005
  21. ISO, "ISO 19101-1: Geographic information — Reference model — Part 1: Fundamentals", ~ (2014)
  22. ISO, "ISO 23247 : Digital Twin Framework for Manufacturing", ~ (2020)
  23. ISO, "ISO", IEC 19763 : Information technology — Metamodel framework for interoperability, 2015
  24. Report of ISO, "IEC JTC1 AG11Digital Twin(Version 3.0)", ISO, 2020
  25. Server Architecture Models for the National Spatial Data Infrastructures, "OGC", ~ (2005)
  26. Saddik A., "Digital Twins : The Convergence of Multimedia Technologies", IEEE Multimedia, 25(2), pp.87~92 (2018)
  27. Sӧderberg R, "Toward a Digital Twin for Real-Time Geometry Assurance in Individualized Production", Manufacturing Technology, 66(1), pp.137~140 (2017)
  28. Tao F, "Digital Twin-Driven Product Design Framework", International Journal of Production Research, 57(1), pp.1~19 (2018)
  29. Wang C, "Handbook of Research on Software Engineering and Productivity Technologies:Implications of Globalization", pp.88~101 (2009)

관련 논문AI추천

이 간행물의 다른 논문 (8건)