ITO 나노입자 면상발열체의 온도유지에 대한 연구
Temperature Maintenance of an ITO Nanoparticle Film Heater
0
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
In this study, we fabricate a high efficiency heater consisting of the indium tin oxide (ITO) nanoparticle (NP)-paste and polydimethylsiloxane (PDMS) and investigate the effect of PDMS on temperature maintenance of the heater through the comparison with the PDMS-free ITO film heater. Compared to the ITO film heater, the temperature of the PDMS/ITO film heater lasts 1.5 times longer. And the power consumption of the PDMS/ITO film heater is reduced by 35%, owing to the low thermal conductivity of the PDMS layer.
Abstract
In this study, we fabricate a high efficiency heater consisting of the indium tin oxide (ITO) nanoparticle (NP)-paste and polydimethylsiloxane (PDMS) and investigate the effect of PDMS on temperature maintenance of the heater through the comparison with the PDMS-free ITO film heater. Compared to the ITO film heater, the temperature of the PDMS/ITO film heater lasts 1.5 times longer. And the power consumption of the PDMS/ITO film heater is reduced by 35%, owing to the low thermal conductivity of the PDMS layer.
참고문헌 (6)
- H. Cheong, "Transparent film heaters with highly enhanced thermal efficiency using silver nanowires and metal", metal-oxide blankets, 2015, pp.146, 11~
- J. Li, "A flexible and transparent thin film heater based on a silver nanowire", heat-resistant polymer composite, 2014, pp.299(11), 1403~
- 이의복, "유해가스 차단시스템용 MEMS 가스 센서", 전기전자학회논문지, 13(4), pp.37~42 (2009), 한국전기전자학회
- Z. Chen, "Fabrication of highly transparent and conductive indium-tin oxide thin films with a high figure of merit via solution processing", Langmuir, 29(45), pp.13836~ (2013)
- K. Im, "Flexible transparent heaters with heating films made of indium tin oxide nanoparticles", J . Nanosci. Nanotechnol, 13(5), pp.3519~ (2013)
- K. A. Brown, "A cantilever-free approach to dot-matrix nanoprinting", PNAS, 110(32), pp.12921~ (2013)